Trailer Wiring Extensions for use with Reese Titan 2-1/2-Inch Hitch Box Extension RP45292

Question

Question:

I purchased items, RP45292 and BX88225. Will these two items work together? Also, I would like to purchase an electric cord extension and safety chains that will work with the extension. Which ones do I need to purchase?

asked by: Robert H

0

Expert Reply:

Thank you for your recent purchase of the Titan 2-1/2-Inch Hitch Box Extension # RP45292 and the Blue Ox 2-1/2-Inch Hitch Receiver Immobilizer # BX88225. These two items are compatible with each other.

For a trailer wiring extension if you need a 7-way type you can use TorkLift 21-inch # TLW6021, 36-inch # TLW6036, 42-inch # TLW6042, 48-inch # TLW6048, 60-inch # TLW6060 or for a 10-foot length part # TLW6510.

If you need a 4-pole wiring extension we have 12-inch # HM48145, 48-inch # HM47115 and 120-inch # HM48235. If you need a different specific length, please tell me.

Safety chains in various lengths and capacities are shown on the linked page. Where you connect them will determine the length you need and the trailer weight will determine the needed capacity.

expert reply by: Adam R

0

Answer 1

You can use a hitch extension but it will reduce your trailer hitch tongue weight capacity by 50 percent. We don't have a 2 inch hitch extension compatible, so I recommend a 2-1/2 inch hitch for your truck and get the Titan Hitch Box…

view full answer...

Answer 2

The TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 48" Long #TLE1648 you were looking at itself is not weight distributing, the chains and turnbuckles used are to keep the extension stable. When used with a…

view full answer...

Answer 3

To use a TorkLift 48" hitch extender you will have to change out your receiver on your 2019 GMC Sierra 3500HD Denali. The TorkLift Cannon Hitch Extension #TLE1648 will only fit the 3" receiver that comes on the Ford Super Duty trucks. To…

view full answer...

Answer 4

The TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 48" Long #TLE1648 will work just fine in the 3" trailer hitch receiver on your 2014 Ford F-350. This extension was designed for the 2017+ Ford trucks, but works…

view full answer...

Answer 5

Thanks for the pictures! My main concern in recommending a shorter extension, like the 36" TorkLift SuperTruss item #TLE1536, is clearance when making turns. The 36" would clear your camper and allow you to install your tow bar without…

view full answer...

Answer 6

The TorkLift Cannon Hitch Extension #TLE1648 is a 48" receiver extension. This extension will allow for 300lbs of tongue weight and 3,000lbs towing. If you use a weight distribution hitch the weight capacity is 600lbs of tongue weight and…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Trailer Wiring Extensions for use with Reese Titan 2-1/2-Inch Hitch Box Extension RP45292

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching