Hand Winch Cable with Safety Hook 1/4" Diameter x 50' Long - 3,500 lbs

See what our Experts say about this Dutton-Lainson Accessories and Parts

• High Capacity Hand Winch Recommendation for 10,000 lb Capacity
  The highest capacity hand winch we have is the Dutton Lainson part # DL14881 which has a capacity of 3,500 lbs. So with three of these you'd have 10,500 lbs of winch capacity. For a cable with a matching capacity we have the part # DL24104 which is 50 feet in length.
  view full answer...
• Winch Recommendation for Lifting 900 lbs 20 Feet High
  A winch that you could consider using is the Dutton-Lainson Brake Winch, # DL14964, which would allow you to lift the 900 lb load 20 feet, with the 50 foot hand winch cable, # DL24104. This winch has the advantage of less moving parts and is a bit more economical. The drawbacks to this winch are that the winch will be harder to crank and there are not two speeds to select from. If you are lifting from the floor to an elevated position you could also use a block and tackle setup. The force...
  view full answer...
• Brake Winch Recommendation for Lifting 500 lb Load Off Ground
  You would want a Worm Gear Winch like the part # DL10954 that can be used as a hoist. Worm gear winches are really the only type of hand winch that is designed to work well with hoisting items off of the ground and suspending them. This winch has a 1,500 lb capacity so it would make easy work of your 500 lb load. For cable the part # DL24104 is 50 feet long and has more than enough capacity.
  view full answer...
• Best Type of Winch to Lift Truck Canopy
  The type of winch to use for safely lifting your truck canopy is a worm gear winch. Worm gear winches are more powerful than ones that use planetary gears and with a worm gear winch the weight of the load cannot reverse the direction of pull. If you want an overhead mount we offer the 1500-lb Dutton-Lainson # DL10954 which includes a loop drive. You can use this with 50-foot cable # DL24104. I also linked for you a helpful article concerning winches as well as our main page that displays...
  view full answer...
• Is there a Wire Rope/Cable that is Between 25 and 50 Feet Long for Dutton Lainson Worm Gear Winch
  Dutton Lainson winch # DL11004 is designed to accept a strap and the longest strap available is 25 feet. Since that is not going to be long enough I recommend looking at a different worm gear winch such as # DL11001. However, the wire ropes for these winches go from 25 feet up to 50 feet with nothing in between. It is better to have too much line than not enough so if you go with this winch I recommend wire rope # DL24104.
  view full answer...
• Hand Winch Recommendation that has a Hex Drive for a Drill
  Dutton-Lainson Hand Winch # DL15721 does not have a hex head that is fixed and would allow you to use an electric drill attachment. For that I recommend using worm gear winch # DL11001 which does have a hex drive and you can use a 5/8 inch socket attachment to power the load in or out. Worm gear winches are brake winches so when you stop turning the drum, either with the handle or a drill, it will hold the load. There is also no minimum load required. This winch can accept up to a 82 foot...
  view full answer...
  
• Recommendation for a Winch to Load a Harley Davidson Motorcycle into a Cargo Trailer
  You would need to consult a qualified welder to have a mount fabricated that will allow you rotate the handle 360 degrees on a hand winch. We do not stock any bolt on parts that are heavy enough to be used to mount a winch safely in this case, and you would need to tie the mount into the trailer frame for stability. We have a Universal Hand Winch Right Angle Mounting Bracket, item # DL24110, which would make the fabrication of the raised mount easier. An option I would look at, would be...
  view full answer...
• 2 Speed Winch Recommendation with Free Wheel Option and 50 Feet of Cable
  The Dutton Lainson 2-Speed Hand Winch # DL15440 that you referenced is a 2 speed jack that if you push up on the ratchet lever it will allow it to free wheel. Check out the 2:45 mark of the video I attached to see how this is done. For 50 foot long rope to use you would want the part # DL24104 as well.
  view full answer...
• Hand Winch Needed that will Accept 60 Feet of 1/4 Inch Wire Rope with at least 600 Pounds Capacity
  We have several options that may work for your application. The Dutton-Lainson Hand Winch with TUFFPLATE Finish, Two Speed with Direct Drive - 1,800 lbs., item # DL15502, will hold up to 70 feet of 1/4 inch wire rope or cable. Next, the Dutton-Lainson Hand Winch with TUFFPLATE Finish, Single Speed - 1,800 lbs., item # DL14627, will also hold up to 70 feet of 1/4 inch wire rope or cable. Finally, the Dutton-Lainson Hand Winch with TUFFPLATE Finish, Single Speed - 1,600 lbs., item # DL14527,...
  view full answer...
• Winch Recommendation for Hoisting a Jeep Top to the Ceiling
  Only one style of winch would I recommend for hoisting something from the ceiling. I recommend a worm gear winch, # DL10954, that you can mount on the ceiling and use an extension pole to turn the loop drive handle. Place this winch centered above where you would lift the top so you will not have to use pulley blocks to get a straight line pull. Worm gear winches will brake automatically if you release the handle which is nice. You will also need a secondary support system to actually...
  view full answer...
• Can Hand Winch be Used to Pull Motorcycle onto Truck Bed
  You can use a hand winch to pull your motorcycle onto your truck bed so long as it has the right capacity and you are able to find a place to mount it so you can turn the handle. You never mentioned the weight of your motorcycle but the Dutton-Lainson Hand Winch # DL14881 which has a 3,500 lb capacity and hand brake should more than get the job done. You will want to use the Hand Winch Cable with Safety Hook # DL24104 with the winch as well. The easiest thing to do would be to use an...
  view full answer...
• Available Types of Electric and Hand Winches
  Electric winches can require substantial battery power, but this will vary depending on the actual weight of the load. If you have access to your household AC power and an installation point that is protected from the elements you might prefer to avoid the battery and solar charger entirely with a winch like # DL25707. The long 50-foot cable on this winch might allow you more mounting options. If you find you prefer the simplicity of a non-electric hand winch you can spend a lot less and...
  view full answer...
• Recommended Hand Winch For Pulling 300 lb Catamaran 60 Feet Across Beach
  The Dutton-Lainson Hand Winch with TUFFPLATE Finish # DL15103 would work well for you. It has plenty of capacity, keeping in mind that the capacity of the winch decreases with each layer of cable that wraps around it. This winch does have the option to freewheel, but it features a lock to keep the winch from backing off. It will also accommodate up to 79 feet of 3/16 inch cable. The cable isn't included with the winch, and the longest length we carry is part # DL24104 for 50 feet. You should...
  view full answer...
• Higher Capacity Replacement For Shelby 5407 Hand Winch
  The discontinued Shelby 5407 is a single-speed, 1,700 lb hand winch, and we can get you a replacement with a higher capacity. The best option for that is a winch from Dutton-Lainson: - Dutton-Lainson Hand Winch # DL14881 The # DL14881 is a 3,500 lb capacity, 2-speed winch with a manual hand brake. Going with a 3,500 lb capacity will give you some margin for error because the capacity is reduced as the line builds up, so I strongly recommend the 3,500 lb winch. The other thing you will...
  view full answer...
• What Size Cable Can I Use on a Fulton Model 542 Boat Winch
  I may have a solution for you, but there's not a lot of information available about the Fulton 542 winch since it's been discontinued for some time. I was able to find out that your winch can accept 1/4" diameter cable, up to 70' long. A good replacement for that would be to use the Hand Winch Cable with Safety Hook 1/4" Diameter x 50' Long - 3,500 lbs # DL24104, which is the longest cable we have available. When it comes to the Fulton Winch Wire Rope Keeper # F501001, I've attached a...
  view full answer...
  
• What Does Dutton Lainson Worm Gear Winch DL10954 Weigh
  The Dutton-Lainson Hand Winch - Worm Gear # DL10954 that you referenced weighs 10 lbs and the cable that fits this part # DL24104 weighs 6 lbs so you'd be looking at a total of 16 lbs.
  view full answer...
• Mounting 1/4 Inch Cable to Hand Winch
  The Cable Clamp for Pulling and Brake Winches by Dutton-Lainson # DL24350 is compatible with 1/4 inch stainless Steel winch cable like the Hand Winch Cable with Safety Hook 1/4" Diameter x 50' Long - 3,500 lbs # DL24104. You can also use the Cable Fastener for 1/4", 9/32" and 5/16" Cable and Heavy Duty Winches # DL24362 or the Cable Fastener for 3/16", 7/32", and 1/4" Cable and Medium Duty Winches # DL24361 to fit your 1/4 inch cable.
  view full answer...
• Recommended Manual Winch For Clothesline Application
  You can use a manual winch for clothesline. For the length you want, I recommend using the Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 12' Strap # DL16003. You would have to remove the strap, but this will give you a max drum capacity of 1/8" x 87 foot. I recommend getting the Bulldog Winch Wire Rope for Part No. 10002 - 8.3mm x 30.5m # BDW20109. You can simply cut off whatever doesn't fit on the spool on the back side. Another option if you want the more traditions...
  view full answer...
• Winch Cable Size Compatible with Fulton Replacement Cable Keeper Kit F501120
  The Fulton Replacement Cable Keeper Kit # F501120 works with 1/4-inch diameter winch cables, or wire ropes. The hole in the keeper matches this dimension, which is shown in the linked photo. This works with cables like # DL24104 which is 50-feet long.
  view full answer...
  
• How to "Increase" Diameter of Spool on Worm Gear Winch DL10954
  What you can do is use a longer cable on the worm gear winch part # DL10954 as that will basically give you a larger spool diameter as the cable will be wrapped several times around the spool. For a 50 foot long cable we have the part # DL24104.
  view full answer...
• Hand Winch Recommendation with Free Wheel and Longer Steel Cable
  The Dutton Lainson 2-Speed Hand Winch # DL15440 that you referenced is a 2 speed jack that if you push up on the ratchet lever it will allow it to free wheel. Check out the 2:45 mark of the video I attached to see how this is done. This also has a 3,200 lb capacity as well. For 50 foot long rope to use you would want the part # DL24104 as well.
  view full answer...
• Boat Winch Recommendation for a 20ft Pontoon Boat With No Rollers
  When it comes to choosing a winch for a boat trailer, there are a few general rules we can use. The boat-size-to-winch capacity is generally 2 to 1. With good rollers and short winching distances, the ratio can increase to 3 to 1 and with wooden bunks and long winching distances, you will want to reduce the capacity to 1 to 1. When your're loading and unloading much of the weight is supported by the water, which will lighten the load. However, it is better to go with a winch with higher...
  view full answer...
• Can Synthetic Wire Rope be Used with Dutton-Lainson Hand Winch
  I spoke with my contact at Dutton-Lainson regarding the 2-Speed Hand Winch # DL14881 that you referenced. She stated that they do not recommend using synthetic wire rope with any of their winches. This is because of how synthetic rope will get tighter as it stretches, which over time can actually cause damage to the winch drum. For this particular winch, I instead recommend using the cable # DL24104. This galvanized aircraft cable measures 50 feet long and includes a safety hook. I have...
  view full answer...
• Hand Winch Recommendation to Lift a Cab Off a Tractor in a Garage
  The Dutton-Lainson Worm Gear Winch, # DL11001, is just the winch you are looking for. A worm gear winch is great for smooth controlled raising and lowering and the reel will automatically stop when you stop cranking, whether you are lowering or raising the tractor cab. You can also move from raising to lowering without having to adjust a pawl or ratcheting lever. There is no freewheel option with a worm gear winch, so you will not have to worry about the cable releasing and dropping the...
  view full answer...

Do you have a question about this Accessories and Part?