Bulldog Winch Snatch Block - Gold Zinc Coated - 19,000 lbs

See what our Experts say about this Bulldog Winch Accessories and Parts

• Electric Winch Compatibility for Vertical Lifting Like An Elevator
  This is a unique question with a couple of different variables. That is a lot of weight to lift vertically which isn't the normal use for any of the electric winches we carry. They are designed for rolling loads and not a vertical pull of that capacity. We don't have a manual winch capable of the capacity you are seeking but these will run off a 12V battery (so power outage wouldn't be an issue) and you can always use a charger/maintainer like # CTEK56353. I've linked the page to your...
  view full answer...
• Recovery Winch Recommendation for a 2003 Ford F-250 Diesel
  The Talon Series Winch, # SW1612201, that you referenced is a large winch and may be overkill for your truck. The Talon winches are high-performance recovery winches that they will have a faster line pull, an adjustable clutch, an upgraded remote and they offer a synthetic rope option that will not bind or fray like the steel cables. For your 2003 Ford F-250 Diesel, I recommend looking at the Rock 98 Off-Road Winch, # SW1698201. We have installed this on a 2004 F-250 and made a demonstration...
  view full answer...
• Recommended Bulldog Electric Winch and Related Items for Car Hauler Trailer
  We can help you with an electric winch and wiring kit for installation on the tongue of your tilt-bed car hauler trailer. Winches, like jacks, are best selected with a healthy safety margin in their weight capacity. For example, for an actual need of 1000-lbs using a jack or winch rated for let's say twice that will offer benefits such as reduced wear and improved reliability. Often a product used well below its maximum capacity will tend to last longer. A rolling item like a disabled...
  view full answer...
• Which Snatch Block Is Best For 5/32" Winch Wire Rope?
  The Bulldog Winch Snatch Block # BDW20049 does not technically have a minimum wire size, but it does have a maximum wire diameter of 3/8". This would likely work fine with your 5/32" wire # BDW20102, however, a more appropriate snatch block for the 5/32" wire would be Bulldog Pulley Block for Powersports # BDW20004 which can handle maximum wire diameter of 1/4". This block is rated a 4,000lbs break strength and 1,600lbs working load limit which is comparable to your 5/32" winch wire that...
  view full answer...
• Recommended Wiring for Superwinch Talon Series Off-Road Winch
  The Superwinch Talon Series Off-Road Winch is a very nice winch that as you stated draws 345 amps at the 14,000 lb line pull. In order to give you the best option we have, I recommend the Bulldog Winch Rear Wiring Kit - Quick Connect to Terminal End - 2 Gauge - 20' Long # BDW20206. You will want to use the shortest distance possible for the best line pull strength. To get the full amperage, you would need to have your alternator running and have about a 5 foot length. One way to assist...
  view full answer...
• Can Winch Snatch Block Increase Weight Capacity of Winch
  Using a snatch block like the # BDW20049 you can basically double the capacity of the winch you are using. You should note that when doing this you end up slowing down the speed of the jack by 50 percent. The same amount of weight will be present on the cable, but if you are worried about the location of where you have the winch mounted it would have 50 percent less of a load on it. If you check out the lovely picture I edited you'll see how a winch and pulley/snatch block need to be set...
  view full answer...
  

Do you have a question about this Accessories and Part?