Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - 2,500 lbs

See what our Experts say about this Dutton-Lainson Trailer Winch

• Recommended Dutton-Lainson 2500 Winch For Boat Lift Wheel
  You can use a Dutton-Lainson hand winch for your boat lift, and the easiest one for lifting a 1,700 lb load will have an automatic brake, and a smaller reel hub diameter. A smaller diameter means a shorter cable, but quicker pulling speed. And while you mentioned the B-Series of winch, you may need a DLB-Series, and the reason I say that is because the right one for a boat lift wheel will depend on the internal thread in the center hub of the wheel. The B-Series will work with a boat...
  view full answer...
• Which Dutton Lainson Winches Does the Dutton Lainson Winch Socket Work With
  As long as your winch is a Dutton Lainson B series winch, you can use the # DL6456 socket on it. The socket fits in 1/2" drill and measures 13/16" x 13/16" (outside). The number that you mentioned is just a number used to identify the warning label on Dutton-Lainson brake winches. The actual winch model number is stamped into the base of the winch on the side opposite the handle. I've attached a couple photos pointing this out. I've also listed a number of Dutton Lainson winches that...
  view full answer...
  
• Difference Between Dutton-Lainson DL14958 and DL15850 Brake Winch
  The only difference between the two is the diameter of the hub that the cable would wrap around. The hub of the # DL14958 is 3-1/8 inches while the hub of the # DL15850 is 2-1/2 inches. The # DL14958 can accommodate up to 40 feet of 5/16 inch cable, while the # DL15850 can handle up to 45 feet of the same diameter cable. In other words, the # DL15850 has a slightly larger cable capacity. Other than that, they're identical.
  view full answer...
• Can Dutton-Lainson 15850 Brake Winch Use 1/4 Inch Cable
  Yes, so long as your 1/4" cable is not longer than 45 feet, you can use it with the Dutton-Lainson B2500DL15850 winch, which is the following part number: - Dutton-Lainson Hand Winch w/ Automatic Brake # DL15850 If your cable is too long then go with the shorter 25 foot Hand Winch Cable with Safety Hook # DL24102.
  view full answer...
• What Type of Dutton Lainson Winches Can Drill Adapter 6456 Work With
  The drill adapter cannot be used with the Dutton Lainson winch part # DL15850 as the part # DL6456 only works with the DLB style of Dutton Lainson winches like the part # DL16331.
  view full answer...
• Dutton Lainson Winch Recommendation for Boat Winch on Dock
  We can help you with a winch but not with a large wheel like in the picture you mentioned. They have several winches designed for boat lifts and those winches are compatible with the big wheel you mentioned. These include the following: Heavy Duty Brake Winch, 1-1/8" Drum - 1,500 lbs. # DL10770 Heavy Duty Brake Winch, 3-1/8" Drum - 3,500 lbs. # DL24844 Heavy Duty Brake Winch, 2-1/2" Drum - 1,500 lbs # DL14927 Heavy Duty Brake Winch, 1-1/8" Drum - 1,200 lbs. # DL10808 Heavy Duty Brake...
  view full answer...
  
• Winch Recommendation for Hoisting a 300 lb Motor
  You would want a Worm Gear Winch like the part # DL10954 that can be used as a hoist. The Dutton-Lainson Heavy Duty Brake Winch # DL15850 that you referenced is not rated for lifting things off the ground. Dutton Lainson states that this winch is not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people can be present.
  view full answer...
• How Many Dutton-Lainson 2500lb Hand Winches Are There?
  We have quite a few different Dutton-Lainson hand winches that have a 2500lb capacity. Here are the options: Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - Left Side Handle - 2,500 lbs # DL15403 Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - 2,500 lbs-Right Side # DL15721 Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - 2,500 lbs-Right Side # DL10786 Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - 2,500 lbs-...
  view full answer...
• Replacement Dutton-Lainson Hand Winch Compatible with a Boat Lift and Wheel for a Handle
  That is definitely a boat lift winch you have and it is definitely made by Dutton-Lainson. They have several winches designed for boat lifts and those winches are compatible with the big wheel you have. These include the following: Heavy Duty Brake Winch, 1-1/8" Drum - 1,500 lbs. # DL10770 Heavy Duty Brake Winch, 3-1/8" Drum - 3,500 lbs. # DL24844 Heavy Duty Brake Winch, 2-1/2" Drum - 1,500 lbs # DL14927 Heavy Duty Brake Winch, 1-1/8" Drum - 1,200 lbs. # DL10808 Heavy Duty Brake Winch,...
  view full answer...
  
• Dutton-Lainson B Series Ratcheting Handle Compatibility
  The B Series Brake Winch Ratcheting Replacement Handle by Dutton-Lainson part # DL70346 is designed to replace the regular non-ratcheting handle on all single speed Dutton-Lainson B Series brake winches. Therefore, this handle is compatible with a wide variety of hand winches. I have attached a product comparison page that lists all of the hand winches this ratcheting handle is compatible with.
  view full answer...

Do you have a question about this Trailer Winch?