Hand Winch Cable with Safety Hook 1/4" Diameter x 25' Long - 1,400 lbs.
(24 reviews)
Price: $40.90
In Stock
Hand Winch Cable with Safety Hook 1/4" Diameter x 25' Long - 1,400 lbs.
Item # DL24100
Retail:$65.09
Our Price: $40.90
You Save: 37%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (24)
- Q & A (0)
- Videos (1)
- Photos
Dutton-Lainson Accessories and Parts - DL24100
- Trailer Winch
- Cables and Straps
- Wire Rope
- Dutton-Lainson
- 1/4 Inch Diameter
- 2500 lbs
- 25 Feet Long
Winch cable and hook.
Features:
- Suitable for:
- Hand-operated winches up to 3,500 lbs
- Dutton-Lainson StrongArm electric winches up to 3,500 lbs
- 7 x 19 Galvanized aircraft cable
- Includes safety hook
Specs:
- Dimensions: 25' long x 1/4" diameter
- Safe working load limit: 1,400 lbs
Note: All straps and cables should be chosen according to their Safe Working Load Limit (WLL). If the WLL of the cable is not given, simply divide the maximum capacity (break strength) by 3. The WLL is always one-third (1/3) of the maximum load.
24100 Hand Winch Cable with Safety Hook 1/4" Diameter x 25' Long - 1,400 lbs.
Video of Hand Winch Cable with Safety Hook 1/4" Diameter x 25' Long - 1,400 lbs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Dutton-Lainson Trailer Winch DL24100 Review
Today we're going to be taking a look at Part Number DL24100. This is the Dutton-Lainson Hand Winch Cable. It's going to have the safety hook on one side, exposed cable end on the other. That way you can easily attach it to your winch. This is designed for hand-operated winches up to 3,500 pounds; For StrongArm electric winches up to 3,000 pounds. For all other applications, it's going to offer a safe working load limit of 1,400 pounds.
This is going to be 7 X 9, very flexible Galvanized aircraft cable. Very strong and very durable. Here on this end, we're going to have the forged steel hook. It's going to have the spring-loaded safety latch that's going to prevent accidental disconnecting or unhooking. They've put a nice steel plate around the inner part of the loop here.
That way, as the hook swivels around that opening, or around that connection point, it's not going to do any damage to the surfacing here on our cable. The cable itself is going to measure 25 feet in total length, and it's going to give us a diameter of a 1/4 of an inch. That's going to do it for our review of Part Number DL24100. This is the Dutton-Lainson Hand Winch Cable with the Safety Hook. It's going to offer a 1/4-inch diameter, giving us an overall length of 25 feet. .
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Hand Winch Cable with Safety Hook 1/4" Diameter x 25' Long - 1,400 lbs. - DL24100
Average Customer Rating: 4.7 out of 5 stars (24 Customer Reviews)
Winch cable and hook.by: Kenneth03/31/2019
Product as described. Fast shipping. Worked just fine on the winch of my boat trailer converted to utility trailer that I pull behind my Cub Cadet Challenger 750 side by side. Just what I needed for the trailer. Thanks.
by: Moose12/17/2016
Bought this cable and hook combo about a year ago as part of a project to hoist our kayaks up out of the way in the garage. It was exactly as advertised, was high quality, and has performed flawlessly. Etrailer is my go-to source for anything related to trailers and similar equipment.
by: Doug09/16/2016
I am very happy with Etrailer. This is my 3rd order in the past 4 years and all parts have to do with a early 70s shoreline boat trailer which carries a 1975 Seacraft Safari. The personnel are very helpful and shipping excellent. Very pleased with the tires and wheels I got in 2011. I will be finishing up installing the parts I got this year in the near future when I pull my boat. I will let you know if I have any issues.
by: Stephen 11/21/2021
I followed the loading instructions...
by: Tom, aka ElkMtnMan04/30/2015
The DL 11001 worm drive winch and this 1/4" cable make a great pair for mounting on a car hauler trailer, and the capability to use an electric drill motor to speed the process is a real plus. I especially like the self braking feature of the worm drive. I tested it after my trailer installation by cranking the cable taut, an letting it set for 3 days..... no relaxation in the cable whatsoever. It just stays put due to the huge mechanical advantage of the worm gear.
by: Robert08/31/2015
The cable is as bad as the winch I bought. It is not very flexible because the strands are of the cheaper variety. It is already splaying and it was only wound once on the drum. Will not last.
by: Steve S.05/26/2013
Had been looking for a 1/4" winch cable. This one fit my needs.
by: David Dotson03/23/2017
Great cable to go with my winch purchase.
Top quality.
by: Kirk K.02/11/2011
The Winch Cable with Hook assemblies i ordered were exactly what I had ordered.The shipment arrived as promised and the quality is excellent. Thank You,E-Trailer for your prompt and curtious service. Before I purchase any product,I will check your Website and if you have the stuff I need will directly order from your website.
by: Scott C.12/02/2011
Product arrived promptly, exactly as described and of good quality. Will continue to purchase items from etrailer. Excellent service.
by: Dave03/27/2020
Product as advertised, worked good; delivery was very prompt.
by: Bernie11/04/2017
Replace old cable with new.
by: Raymond01/25/2018
No problems at all.
by: Joe R.07/17/2015
Exact cable I needed, And Fast shipping. Thanks
by: MikeMac06/02/2016
Quality is excellent.
by: Richard C.07/20/2012
Perfect replacement... Exactly what I needed!!!
by: Larry07/25/2012
Good strong cable, easy to install...thanks
by: Horace 07/17/2023
by: Brian 11/16/2022
Very good
by: William 10/02/2022
by: Jim11/12/2020
by: Ray 11/02/2021
by: Tom 01/16/2023
by: Victoria 03/22/2021
24
24
See what our Experts say about this Dutton-Lainson Accessories and Parts
- Best Brake Hand Winch to Replace Shelby 5351 Brake WinchAs of October 2016 Shelby is now owned by winch maker Dutton Lainson. My contact there advised that for the Shelby 5351 brake hand winch the repair kit is no longer available. Fulton's 1500-lb # F143100 is a reliable winch you can use with cable # DL24100. I have linked our main page for all brake hand winches that will allow you to select a new one with the capacity you need. Jut click on the filters on the page to choose singe- or two-speed operation and your preference for a wire rope...
view full answer... - Lighter Duty Worm Gear Winch AvailabilityThe smallest rated worm gear winch we have is 1,500 lbs like the part # DL10950 that you referenced. While this is a bit overkill for the weight you need it would still work well. For a 25 foot long cable you'd then want the part # DL24100.
view full answer... - Recommended Brake Winch for 16-Foot Car Hauler TrailerThe best type of hand winch for your car trailer application is a brake winch. These provide a self-locking holding action to prevent a runaway load. Their planetary gears deliver easy and efficient cranking. A good option is the Fulton High Performance Hand Winch # F143100. This is rated for 1500-lbs, but it will be fine for your rolling load. If you prefer a heavier-duty winch consider the 2K-rated Dutton-Lainson # DL11001 and the cable/hook part # DL24100. Any winch must be installed...
view full answer... - Recommended Hand Winch for Light LoadsThe best option we can offer for light loads is a worm gear winch since there are no minimum load requirements. For this, I recommend the Dutton-Lainson Hand Winch part # DL10950 and Hand Winch Cable with Safety Hook part # DL24100. The load will be held in place whenever the handle is released.
view full answer... - What Size Wire Rope Does Dutton Lainson Winch DL15303 UseThe Dutton Lainson winch part # DL15303 was designed to be used with a 1/4 inch diameter wire rope like the Dutton Lainson Wire Rope # DL24100.
view full answer... - Recommended Hand Winch for Low-Weight Lifting of Outdoor GrillThe best type of winch for your application is a worm gear winch like the Dutton-Lainson Worm Gear Hand Winch with Hex Drive # DL11001. I recommend this over a brake winch because it does not have a minimum load requirement, it allows you the option to use a power drill to operate it if you like, and it needs no mechanism to stop gear movement. With a worm gear winch unless you are cranking the handle (or using a drill) the winch simply cannot rotate. This is the best type of safety feature...
view full answer... - Winch Recommendation for Use as Ceiling Hoist for Loading Heavy KayakThe Dutton-Lainson Worm Gear Winch, # DL11001, will work great to hoist your 230 lb boat. The hex head allows you to use either the included handle or a heavy-duty 1/2 inch drill. Worm gear winches are great for hoisting objects because they do not have a free wheel option and the load cannot reverse the direction of the winch. For wire rope you would need the part # DL24100.
view full answer... - Floor Mount Winch Needed to Pull Powered Parachute Airplane Into Enclosed TrailerWe have exactly what you are looking for! The Dutton-Lainson Worm Gear Hand Winch # DL11004 has a hex drive topwind handle that you can operate by hand while it sits on the floor of your trailer or with a drill and a 5/8" socket. I recommend using the drill since the worm gear operates really slow. It takes 40 turns of the handles for 1 rotation of the drum. This winch is rated for 2,000 lbs so it will easily be able to pull your powered parachute airplane into your enclosed trailer....
view full answer... - Winch to Use for Vertical Lifting ApplicationProGrip XRT Rope Lock Tie-Down # 317-404400 is intended for use to secure cargo items. It is not really intended for use as a hoist to lift and hold heavy items overhead. Although four of these would have plenty of weight capacity it might be tough to operate all of them at once. A safer and better solution is a worm gear winch like # DL11011 which is designed for vertical lifting applications. With it you can use 25-foot cable # DL24100 for a 1400-lb lifting system that will hold the...
view full answer... - Hoist Options to Remove a Canopy Off of a TruckI have a couple different options you can use to lift a canopy off of your truck. If you are removing the canopy in a garage or shop that would provide overhead supports, you can use an overhead winch like the Dutton-Lainson Hand Winch # DL11011 with the Hand Winch Cable with Safety Hook # DL24100. If you are needing a system that does not require supports overhead, then you could use the Brophy Heavy Duty Cable Camper Jacks # CX74.
view full answer... - Winch & Cable for Use to Raise and Lower Dust CollectorThe Dutton Lainson worm gear hand winch # DL11004 is a good choice for your specific application but since you need a 25-foot strap or cable I suggest instead their similar 1500-lbs-rated worm gear winch # DL11011. This winch is rated with plenty of capacity for your needs and it also has the drill-drive option. It can be fitted with a 25-foot cable # DL24100.
view full answer... - Worm Gear Winch and Hoist Recommendations to Lift a 50 Pound KayakAt 1,500 pounds capacity worm gear winch # DL10954 is the lowest capacity available. Speed is an issue with worn gear winches because they allow for the precise movement of a load. If you used # DL11011 with a series of pulleys you could mount the winch lower and operate it with a power drill to speed things up significantly. Regarding pulling 2 lines in at the same time the preferred method would be to use pulleys and one line feeding in to the winch though you might find success using...
view full answer... - Replacing A Shelby 5405 Winch On A 1988 Glastron Boat TrailerI can definitely point you in the right direction of a new winch. Unfortunately Shelby is no longer in business, so a direct replacement is out of the question. That being said we have come across these Shelby 5405 winches before, and have found the Dutton-Lainson # DL15303 to be an extremely similar 1,400 lb winch. This is a single speed zinc plated winch designed for marine use. It can be used with a 1/4' wire rope like the # DL24100, or with a 2" wide trap like the # DL24260. Plus Dutton-Lainson...
view full answer... - Can Winch Strap Be Used On Dutton-Lainson Worm Gear Hand Winch # DL11011The Dutton-Lainson Worm Gear Hand Winch with Hex Drive Handle # DL11011 referenced in your question is designed specifically for use with a cable like # DL24100. A strap cannot be used with this particular model winch. For a similar style, worm gear hand winch that is designed to be used with a strap, I recommend the Dutton Lainson # DL11002. This has a slightly larger capacity of 2,000 pounds when compared to the model you were looking at and can be used with the winch strap # DL24242....
view full answer... - What is Maximum Length of Strap That Can Be Used On Fulton Single Speed Trailer Winch # FT6000301The Fulton Single Speed Trailer Winch, part # F142002, can be used with 15 feet of 2 inch wide strap, like the Hand Winch Strap with Safety Hook, part # DL24239. This is the maximum length that can be used in this winch. It can also be used with a maximum 36 feet of 1/4 inch cable. The cable would only come in 25 foot lengths so you can use the Hand Winch Cable with Safety Hook, part # DL24100, which will give you 25 feet of cable. If you need the full 36 feet of cable you can use the...
view full answer... - Hand Winch Needed that will Accept 60 Feet of 1/4 Inch Wire Rope with at least 600 Pounds CapacityWe have several options that may work for your application. The Dutton-Lainson Hand Winch with TUFFPLATE Finish, Two Speed with Direct Drive - 1,800 lbs., item # DL15502, will hold up to 70 feet of 1/4 inch wire rope or cable. Next, the Dutton-Lainson Hand Winch with TUFFPLATE Finish, Single Speed - 1,800 lbs., item # DL14627, will also hold up to 70 feet of 1/4 inch wire rope or cable. Finally, the Dutton-Lainson Hand Winch with TUFFPLATE Finish, Single Speed - 1,600 lbs., item # DL14527,...
view full answer... - Worm Gear Winch Recommendation for Hoisting a 150 lb FloatBased on what you are doing I would recommend you use a Dutton-Lainson Worm Gear Hand Winch # DL10954. Worm gear winches are great for hoisting things because the load cannot reverse the direction of the winch and there is no free wheel option. Check out the review video for this product for you. For a cable I would recommend you get a Hand Winch Cable with Safety Hook # DL24100.
view full answer... - Recommended Trailer Valet Trailer Dolly for Moving Loaded Trailer Up and Down Driveway Steep GradeFor your Yakima 66 inch Rack and Roll Trailer # Y08106, I recommend the Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 1,000 lbs TW # TVXL2. This tow dolly will use chain driven solid rubber tires to help you move the trailer up the incline of your driveway when loaded and is height adjustable to accommodate your needs. It also has an automatic brake that will help you as you take the trailer down the driveway to make sure the trailer doesn't run away from you. This...
view full answer...
- Split Reel Winch Solution for Bringing Two Heavy Things Closer TogetherI spoke to my contact at Bulldog and he informed me that their jacks like the # BD150152 that you referenced are designed for pushing force down and are not designed for tension as he said, meaning they can't lift or pull two thing together. He said that usually in the spring they get several people who have the foot plate of their jack frozen in the ground who end up ripping the inner tube assembly out of the jack from trying to force the foot of the ground. Without knowing more about...
view full answer... - Can The Dutton-Lainson DL11004 Winch Use A 25 Foot Long Strap?We are a little limited on what we have for worm gear winches, but if your application does not require the strap to be completely wound and can have 5 feet of excess hanging down/out, you can use the 25 foot strap # DL24249 with the Dutton-Lainson # DL11004. If you cannot, you will only be able to use the 20 foot # DL24242. The only other hex drive winch we have with the worm gear will be the Dutton-Lainson # DL11011 that is designed to be used with wire rope. The 1/4" Diameter with Safety...
view full answer... - Base Dimensions for the Dutton Lainson Worm Gear Winch DL24100The base of the Dutton Lainson Winch part # DL10950 that you referenced are 5-3/4 inches wide and 6-3/4 inches long.
view full answer...
- Winch to Replace Shelby Model 5351 WinchThere is no longer a repair kit available for the Shelby 5351 brake hand winch. A reliable option to replace it is Fulton 1500-lb winch # F143100 along with 25-foot cable # DL24100. I have linked our main page for all brake hand winches that will allow you to select a new one with the capacity you need. Jut click on the filters on the page to choose singe- or two-speed operation and your preference for a wire rope or strap. The linked help article that will guide you to the best winch...
view full answer... - Recommended Brake Winch for Use on Ramped Utility Trailer for Loading 3000-lb TractorThe best type of winch for your application is a brake winch, which automatically stops the drum's rotation when you stop cranking. This will be the safest type for your trailer and also will be easier to crank. A wheeled vehicle like a car or tractor is considered a rolling load in the winch world and this places less stress on the winch than a non-wheeled item. The degree of incline on your ramps has an effect on winch capacity. On level ground a winch can pull a rolling load 10 times...
view full answer... - Mounting a Winch in a Boat House to Pull a Boat Up a Launch RampI am assuming the boat is on a trailer when stored in the boat house which will make things a lot easier. So basically what you could do is use a winch that can pull/lower the trailer and boat up and down the ramp. To load the boat on the trailer you would need to mount a winch to the trailer. For a winch to mount in the boat house you could just go with a hand winch such as # F143201, which has an automatic brake, with cable # DL24100. If the boat house has AC power then you could use...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jameson C
Installed by:
Cole B
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Moose
12/17/2017
A year on, and the cable and hook accompanying the winch from Etrailer continues to perform flawlessly. No fraying, kinking or other issues. A quality product.