Curt Single Hook, Coiled Safety Cables with S-Hooks - 42" Long - 7,500 lbs - Qty 2
(166 reviews)
Price: $43.99
In Stock
Curt Single Hook, Coiled Safety Cables with S-Hooks - 42" Long - 7,500 lbs - Qty 2
Item # C80176
Retail:$59.13
Our Price: $43.99
You Save: 26%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (166)
- Q & A (0)
- Videos (2)
- Photos
CURT Safety Cables - C80176
- 7500 lbs GTW
- Coiled Cables
- S-Hooks
- 42 Inch Long
- CURT
- Coated Cables
Required in most states, safety cables act as a backup if your trailer becomes separated from your vehicle. Each coiled, nylon-coated steel cable has a corrosion-resistant S-hook with wire keeper on one end and a loop on the other.
Features:
- Safety cables help ensure safe towing
- Provide backup connection between tow vehicle and trailer
- S-hook at one end of each cable and a formed loop at the other end
- Wire keepers help prevent S-hooks from accidentally unhooking
- Coiled design eliminates slack - keeps cables from dragging on the ground
- Braided steel construction is strong and durable
- Nylon coating prevents cables from scratching your towing setup
- Zinc coating on S-hooks resists corrosion
Specs:
- Weight capacity: 7,500 lbs
- Overall length (with hooks): 42"
- Cable length: 40"
- Quantity: 2 safety cables
- 1-Year limited warranty
80176 7500 lb Safety Cables by Curt
California residents: click here
Video of Curt Single Hook, Coiled Safety Cables with S-Hooks - 42" Long - 7,500 lbs - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Curt Single Hook Coiled Safety Cables Review
Speaker 1: Today we're going to be taking a look at the Curt single-hook coiled safety cables with S-hooks. Part number C80176. These safety cables are going to be a great replacement for your old, rusty or broken safety chains. Here you can see on our test drive the safety cables are not dragging or clanging around. They're perfectly tracking our tow vehicle. This will help them remain smooth and quiet.
One of our customers said they don't have to worry about pulling up on the campsite super early and waking everybody up. These are nice and quiet compared to noisy chains. They're a braided steel construction with a nylon coating, so we're not going to have any rust and corrosion. Like safety chains, these safety cables are going to act as a backup should your trailer become uncoupled from your tow vehicle.What's nice about these cables is the coil design is going to prevent any dragging when connected like you would see with most link styled chains. The same goes for when they're not in use.
They're not going to be resting in the mud or the moist grass furthermore causing corrosion. On one end, we have a large S type hook, so it's going to work with most safety chain connections. It even features a gate so it won't accidental become disconnected. On the other end, we have a loop so we can connect it to our trailer. Here you can see on this application, we have a welded on bracket with a bolt going through.
Now, you will have to provide your own hardware. Now, in connecting them to your tow loops on your hitch, it's a good idea to cross them just like you would your standard safety chains. This is going to create a cradle so it catches your coupler should it come disconnected from your tow vehicle.They feature a 7500 pound weight rating. The overall length from hook to hook is 42 inches long. Another great thing about the nylon coating is it's not going to harm or scratch your towing setup, and I personally like that it's not going to tear up my hands.
That's going to complete our look at the Curt single hook coiled safety cables with S-hooks. Part number C80176.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Curt Single Hook, Coiled Safety Cables with S-Hooks - 42" Long - 7,500 lbs - Qty 2 - C80176
Average Customer Rating: 4.8 out of 5 stars (166 Customer Reviews)
Required in most states, safety cables act as a backup if your trailer becomes separated from your vehicle. Each coiled, nylon-coated steel cable has a corrosion-resistant S-hook with wire keeper on one end and a loop on the other.by: Michael07/17/2019
I have been using "Coil Cables" for over 30 years. I always tell people about them and suggest over any chain set out there. The coil keeps the cables from dragging the ground and getting chewed up by the road.
I suggest the use of 1/2 inch, Grade 8 hardware to attach to your trailer. If you do not have Grade 8 hardware then jump into your car and go get some. Nothing less is sufficient for the task. Do not sell yourself short on attachments.
Remember this rule: Your wife and children may be coming from the other direction.
Make sure you are safe.
etrailer, my thoughts about this company are simple. Great people and great products. In the past I have contacted the Customer Service group twice. Yes only twice in 10+ years of business. My questions and issues were solved fast and we were all happy.
In the picture, Get real when you build a Grill.
by: John 08/15/2023
Curt Single Hook, Coiled Safety Cables with S-Hooks - 42" Long - 7,500 lbs - Qty 2 worked great.
by: Hamilton05/04/2022
I should have purchased these cables first. They work great. The other cables I purchased got both the latches scraped off pulling out of a parking lot followed by falling off. These get ground into the same spot and keep on going with only a few minor scrapes to show. Latches still intact.
Hamilton
5/5/2023
Still going strong. Pulled my trailer last month and mentioned to my Dad about the cables. Im not a fan of rattling chains and these are perfect for my setup.
by: Jeff05/16/2015
needed to replace rusted cables on a 22 foot 6,000 lb trailer. Looked at these cables and the reviews and decided to try them. Placing the order was simple at eTrailer, they arrived in a few days. Put them on the trailer and everything fit perfectly, exactly as described. Using the trailer this weekend and don't anticipate any issues. I always shop at eTrailer for my trailer and towing needs - best prices, great service and fast shipping - can't be beat!!
Jeff
6/17/2016
the cables are working fine, have used that trailer a half a dozen times since installing them no problems at all, they are a great product at a great value. Its my pleasure to write the review, and has always been a pleasure to do business with eTrailer! Thank you for the follow up.
by: Karl 07/18/2023
Excellent. Heavy duty safety cables. I put them on 2 trailers. All good.
by: Mike 02/08/2024
Very speedy delivery. Very happy with everything about this transaction.
by: Bryan 08/30/2023
Very impressed at how quickly I received my order!! All items were correct and I will definitely be giving etrailer more of my business as well as referring my friends and family.
by: Rowell05/09/2023
I love how much cleaner this looks on my boat trailer and I no longer have chains dragging.
by: Karl 05/11/2023
Nice heavy duty safety cables. Much better than original. Easy to install.
by: James 08/24/2022
Outstanding product!
James
8/25/2023
Great! Glad I purchased it
by: Gary03/09/2018
Took my bolt cutters and removed the old rusty safety chains from my trailer. I then installed these new cables where the old chains used to be, and these cables work great !!! Nothing to drag on the road surface because these cables are coiled just the right amount to stretch out when needed. A great high-quality product that will last a long time.
Gary
3/9/2019
They are still doing a great job for me. Thanks for checking in with me.
by: B.S.09/10/2014
Very pleased with the new safety cables, much better than dragging the chains down the road.
B.s.
9/10/2015
i would recommend these safety cables to EVERYONE!!
by: Chris02/19/2017
Coiled Safety Cables (42" long) - Safety chains or cables are required on travel trailers in most states, and besides, they make a lot of sense. The chains that come with the trailer eventually rust, which initially is more of an eyesore than a safety risk. But they are bulky; and to ensure there is enough length to enable sharp turns, the chains tend to ride pretty close to the road if nothing is done to elevate them in a way that still allows them to function during sharp turns. So these coiled safety cable are a perfect alternative to the bulky chains. The coil allows the cables to extend as needed, while keeping them off the road during normal use. The 7500 pound rating is slightly more than I need, but better safe than sorry. Of course, this is a product one hopes never to have to use, and one never truly knows how well they'll work unless they are needed. But on paper at least, these are perfect. The included hooks work as they should to connect the cables to the hitch. And the vinyl coating should keep the steel cables free of rust. The length was just right for my rig, but be sure to measure the current set-up before buying. These cables are a great replacement for the bulky chains, yet are rated at a higher capacity than the chains that came with my RV.
by: PJ Carhauler Trailer Dude08/25/2016
Very simple item all trailers should have - complements FA80-01-2204 Fastway Zip Coiled Trailer Break-Away Cable - Replaced both the original safety chains and breakaway cables on two new trailers. The convenience is well worth it.........
by: Preston01/26/2023
I could not be more satisfied with the the service, delivery and parts. The salesmen made sure I got my package on time. I actually got it a day early. I will definitely order from them again when I need something else.
by: Peter10/24/2021
The cables are curled and will not straighten out. These were suppose to be safety cables for my tow vehicle behind ny RV. I have tried to straighten them with no success.
Jenny N.
10/26/2021
I do have another solution for you. These cables are designed to be coiled so that they will not drag on the ground while in use. We do have a set of straight cables that are 64 inches in length rated for 8000 pounds, part # RM-646.
Helpful Links
by: Michael02/27/2018
They really work!! Out of the way with no hassle and great customer service.
by: Neal W07/22/2016
The safety cables I ordered arrived in a timely manner (within a week) and were just as described in the product info. The cable is very stout and covered in a heavy PVC so it won't rust or abrade where it is connected to the trailer. The cable loop at each end is protected from wear by a steel sleeve. These look much better than chain and they don't hang down and drag on the pavement like chain does. When I get them bolted to the trailer I'll include a photo of the installation.
by: Chris 07/12/2023
Very fast shipping and Oder was exactly what I needed. Highly recommend these guys!
by: Terry08/13/2015
The safety cables with black nylon coating with 2 extra quick connectors were just what I ordered. They work great and
won't drag on the ground when hooked up. The time it took
to receive the products was very quick with just standard shipping, and the prices were very reasonable for the quality that you get. I will order from e-trailers again and highly recommend them for their products and service. The products were a set of safety cables and 2 extra s-hooks for quick attachment. Thanks again.
by: Thorne08/02/2018
I needed some safety cables for my project to flat tow my Jeep. The standard chains that came with the tow bar had quick links but those would not fit onto the Ridgeline Hitch which has a .6" diameter bar. These are lighter than chains and they fit onto the Hitch Bar easily! Very Nice quality and did I mention fantastic shipping and price? etrailer rocks!
by: SteveS12/24/2020
I tow an older small utility trailer and replaced the rusted chains with these. I personally like how they recoil up when not in use. No issues with installation or use.
25
166
Show More Reviews
See what our Experts say about this CURT Safety Cables
- Can Bolt be Used to Attach Safety Chains to Trailer FrameYes, it is perfectly fine to use a bolt to attach the safety chains of your trailer. I would recommend taking the chains to your local hardware store and getting the largest diameter Grade 8 bolt that will fit into the chain links.
view full answer... - How is the Load Rating for the Curt Safety Cables C80176 DeterminedAs a pair the Curt Single Hook Safety Cables part # C80176 are rated for 7,500 lbs. This would be considered the "tow rating".
view full answer... - How Long Should My Safety Chains Be?This is a great question, and it really depends on your setup. If the safety chain loops on your tow vehicle are spaced far apart then you will need more slack to make a tight turn than if they were closer together. I recommend that you connect your trailer to your tow vehicle and back your trailer up into a near jack-knife position. You'll then want to use a rope to go from the safety chain attachment points of your trailer to your tow vehicle and then measure the length of rope that...
view full answer... - Diameter of Loops of Curt Safety CablesI had the end loops of the Curt safety cables, part # C80176, measured for you. At their widest points the inside measurement is 3/4 of an inch and the outside is 1-1/2 inches.
view full answer...
- Safety Cable W/ S-Hook for Thick Safety Chain Connection Point On 2020 Ford F-350The S-Hooks on the Curt Single Hook, Coiled Safety Cables with S-Hooks # C80176 you were looking at have an opening of 7/8" which is the largest S-Hook we offer, and should work great on the thicker safety chain connection point on your 2020 Ford F-350. I included a video of the Curt # C80176 for you to take a look at.
view full answer...
- Which Way Do the S-Hooks Need To Face When Attaching To Trailer Hitch Safety Chain HoopsI have attached a photo for you below that shows which way the s-hooks should face when attached to the safety chain loops on a trailer hitch. The photo example is using the Curt Single Hook, Coiled Safety Cables with S-Hooks part # C80176 for reference. That said, if the s-hooks have the keeper attached then it should not really matter which way they face.
view full answer...
- How to Use the Curt Safety Chains # C80176 on a TrailerThere's really no secret to it. You would just run the cable that is installed on the right side of your trailer to the safety chain loop on the left side of your tow vehicle and vice versa for the other side. The # C80176 would install on your trailer in the same way as the safety chains that were previously on the trailer.
view full answer... - Will Coiled Safety Cables Catch the Trailer Tongue Like Chains WouldUsing cables such as # C80176 in place of chains is no different than using chains. You would still cross the cables under the tongue so that they will catch the tongue should the trailer come off of the ball. The cables are steel underneath the coating and they are quite firm so the tongue weight of the trailer would not be able to overcome the tension of the cables when the trailer is pulled away from the vehicle in an off-the-ball event just like chains.
view full answer... - Will Curt Safety Chains/Cables Hold Up Well to Salt Spray for Snowmobile TrailerCurt safety cables # C80176 would do fairly well for applications subjected to salt spray since the cables are coated in nylon and the hooks are zinc-coated. They wouldn't be as good as 100% stainless steel, if anyone made any, but they also cost a fraction of the price stainless would!
view full answer... - Are the C80176 Safety Cables Rated for 7,500 lbs Together or IndividuallyThe 7,500 lbs rating is determined for the Curt Single Hook, Coiled Safety Cables with S-Hooks # C80176 when they are used together.
view full answer... - Weight Capacity of Curt Single Hook Coiled Safety CablesThe Curt Single Hook, Coiled Safety Cables with S-Hooks # C80176 has the weight capacity of 7500 lbs rated on using both safety cables. Individually, they would logically be 1/2 that capacity but using only one cable is not recommended so they are not individually rated at all.
view full answer... - Can 42 Inch Long Coiled Safety Cables be Used in Place of 30 Inch Long ChainsSince the Curt safety cables # C80176 are coiled the extra length will not be a problem. The coiled design will keep them off of the ground! I have linked a video review below of these cables for you.
view full answer... - Will Curt Safety Cables C80176 Work on a Trailer with 24 Inch Folding Tongue ExtensionIt really depends on where the safety chain mounts are on the trailer. At 42 inches long safety cables # C80176 are good for at least 21 inches but ultimately it depends on where the safety chain mounts are on the trailer side. If they are right behind the hinge then a 24 inch length would not be an issue. If the mounts are off to the side or much further back then there could be issues when making turns.
view full answer... - Can Curt Single Hook Safety Cables # C80176 Be Used with Factory Gooseneck Loops on 2016 Ram 3500The cast iron safety chain loops on the bed of your 2016 Ram 3500 should measure about a 1/2 inch x 1 inch. If this is the case then the Curt Single Hook Coiled Safety Cables # C80176 will work perfectly. The S-hook features a 7/8 inch opening and there is enough length for the keeper latch to fully engage when hooked up to the loops. These have a weight capacity of 7,500 pounds. I have attached a couple short video demonstrations on these cables that you can check out as well.
view full answer... - Is the Weight Capacity of the 7,500 lb Curt Single Hook Safety Cables with S-Hooks for the PairThe Curt Single Hook, Coiled Safety Cables with S-Hooks part # C80176 have a combined weight capacity of 7,500 lbs. The only option if you need to go much higher are safety chains like the Safety Chain with Clevis Hook part # 63451. I have attached our full list of safety chains below.
view full answer... - Size of S-Hooks on the Curt Single Hook, Coiled Safety Cables Part # C80136 and Part # C80176The Curt Single Hook, Coiled Safety Cables part # C80136 contain s-hooks that are 3/8" diameter and the Curt Single Hook, Coiled Safety Cables part # C80176 contain s-hooks that are 1/2" diameter. The 3/8" diameter s-hooks would be much too small for the safety chain loops on your 2-1/2" trailer hitch but the 1/2" ones should work well for you. They have a 7,500 lb capacity and measure 42" long. I have attached a review video for you.
view full answer... - Dimensions of S-Hooks on the Curt # C80151 Single Hook, Coiled Safety CablesThe S-Hooks on the Curt Single Hook, Coiled Safety Cables # C80151 have an opening of 13/16" so they will be slightly larger than the 3/4" diameter retention features on your OEM hitch. If you would like one that is a little larger than that we have the Curt # C80176 which has an opening of 7/8" (see attached photos).
view full answer...
- Can You Use Quick Links With Saftey Cables On A TrailerYes, you can use a quick link like # C82932 to attach your Curt Saftey Cables # C80176, however each component must exceed or meet the GVWR of your trailer. So if your trailer is 12,000lbs, you'd need quick links that are also rated for at least 12,000lbs. The quick link mentioned above # C82932 is rated for a maximum of 16,500 pounds, and a working load limit of 3,300 pounds.
view full answer... - Do Safety Cables and Cable Connectors Have to Have Same Capacity for Flat Tow SetupYou'd need the safety cables, caribiner/quick connects and anything else to be rated for at least the weight of the towed vehicle. So while the cables part # C80176 are rated for 7,500 you could use the # RM-910022 which is rated for 6k assuming your vehicle weighs less than that. I am fairly certain you have a 2020 Hyundai Santa Fe which would at most weigh 4k.
view full answer... - Safety-Chain Retainer and Chains/Cables for 14' Utility Trailer with 3,500 lb Tandem AxlesThere are a handful of different retainer styles out there to match different thicknesses of chains and cables that we have to offer. So the Buyers Products Weld-On Safety Chain Retainer # 3375471000 would be geared towards a 5/16" diameter (or 1/4") chain/cable while the Buyers Products Weld-On Safety Chain Retainer # 3375471001 would be geared towards a slightly larger 3/8" diameter chain/cable. For your application I recommend going with the part # 3375471001 and pairing it with the...
view full answer... - Trailer Safety Cables Will Not Fit Factory Class V Trailer Hitch on 2015 GMC Sierra 2500HDI am not sure what the gross trailer weight is on what you are towing with your 2015 GMC Sierra 2500 but I have some option that could work. We have quick link # C82932 which is rated for 16,500 pounds break strength and 3,300 pound safe working load limit and has a 1/2 inch diameter. We also have # C81830 with a 15/32 inch diameter rated for 7,600 pounds per hook. These items would allow you to use the chains you have but you would need to go by the capacity of the lowest rated component.
view full answer... - Can a Jeep J-10 Be Flat-TowedI was able to find online that others were able to flat-tow a Jeep J-10 so you can take that as you see fit but I do not have an official statement on this unless otherwise noted in your owner's manual. The process that others have used is as follows: 1: Unlock Hubs 2: Place Transmission In 1st Gear 3: Place Transfer Case In Neutral 4: Leave Steering Column Unlocked The parts you will need to flat-tow the above are a tow bar, the Curt Tow Bar with Adjustable-Width Arms part # C19745...
view full answer... - How to Install Safety Chains on a Trailer that Never Had Them BeforeYou would want to weld the Brophy Safety Chain Mounting Bracket part # MB38 to your trailer, then you would use the quick link part # C82932 to attach the safety chains part # C80176 to your trailer.
view full answer... - Installing and Using Safety Chains on Tent TrailerTo install and use safety chains on your trailer, I recommend first welding on mounting brackets like the Brophy Safety Chain Bracket # MB38 to the trailer. The bracket can then be used to a connect a quick link like the Curt Safety Chain Link # C82932. With the Safety Chain Link attached, you will simply attach your chains like the Curt Single Hook # C80176 with S-Hooks. You should also make sure to cross the chains beneath the trailer coupler. This is so the crossed chains can act...
view full answer...
Do you have a question about this Safety Cable?
Info for this part was:
Edited by:
Frances L
Expert Research:
Michael H
Expert Research:
Jameson C
Video by:
Joshua S
Written by:
David L
Installed by:
Cole B
Installed by:
Hayden R
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Michael G.
7/20/2020
Another year has passed us and I have installed 5 more sets of Coil Cables. As long as Coil Cables are out there I will never go back to safety chains.