Curt 4" Offset Ball for Double-Lock Gooseneck Hitch
(56 reviews)
Price: $129.57
Curt 4" Offset Ball for Double-Lock Gooseneck Hitch
Item # C602
Retail:$170.95
Our Price: $129.57
You Save: $41.38
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (56)
- Q & A (0)
- Videos (1)
- Photos
CURT Trailer Hitch Ball - C602
- Gooseneck Hitch Ball
- 2-5/16 Inch Diameter Ball
- Double Lock Ball
- 20000 lbs GTW
- Chrome-Plated Steel
- CURT
- 4 Inch Offset
Designed for use with Curt's Double-Lock, Flip and Store gooseneck hitch, this ball with extension provides 4" of offset to fit your towing needs.
Features:
- Extension provides 4" of additional space between your truck's cab and your gooseneck trailer
- Ball is chrome plated
- This item is designed for use with Curt's Double-Lock gooseneck hitches
- Assembled in USA
Specs:
- Ball size: 2-5/16"
- Offset: 4"
- Capacity: 20,000 lbs
- Vertical load capacity: 5,000 lbs
- Shank diameter: 2-5/8"
C602 Curt 4" Offset Ball
Video of Curt 4" Offset Ball for Double-Lock Gooseneck Hitch
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Curt Hitch Ball - Gooseneck Hitch Ball - C602 Review
Speaker 1: Today we're going to take a look at the Curt Four Inch Offset Ball for the Curt Double Lock Gooseneck Hitches. Now what happens when you need to pull a gooseneck trailer that has an especially long front over hang, well without the right amount of clearance between the overhang and your truck cab, tight corners can get to be a little tough. This Curt Double Lock Gooseneck Offset Ball will easily slide into any double lock gooseneck hitch and it sets your coupling point four inches back of the original trailer ball hole.The offset gooseneck trailer ball secures in place just like any other compatible gooseneck ball, using the double lock's dual pin locking system. Again, this extension will provide four inches of additional space between your truck's cab and your gooseneck trailer. The ball itself is chrome plated. The base is a durable black powder coat finish.
And again, this item is designed for use in the Curt's double lock gooseneck hitches. The part is made in the USA, the ball size, the gooseneck ball is a standard two and five-sixteenths diameter. Again the offset, which we measure from where it goes in to the hole to the center of the gooseneck ball, is going to be right at four inches. Weight capacity on this is 20,000 pounds. Vertical load capacity is 5,000 pounds, but you do want to make sure it never exceeds your vehicle's maximum gross weight rating.But that should do it for the review on the Curt Four Inch Offset Ball for the Curt Double Lock Gooseneck Hitch..
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Curt 4" Offset Ball for Double-Lock Gooseneck Hitch - C602
Average Customer Rating: 4.9 out of 5 stars (56 Customer Reviews)
Designed for use with Curt's Double-Lock, Flip and Store gooseneck hitch, this ball with extension provides 4" of offset to fit your towing needs.by: Richard 04/05/2024
Gave me enough added turning radius that maneuvering my 5th wheel became so much better when backing into those tight camping site. Excellent quality and have recommended this to many of my camping buddies
by: Dal12/12/2023
I sold my pick up and never used it. I still have it and I really like that it would of made my trailer not hit the tail gate with I was hooking up my fifth wheel.
by: James12/29/2023
Great piece of gear. Very strong and r eliable.
by: Justin U.06/24/2017
Not bad to install I really like the Curt hitch and offset ball, great price fast shiping would not hesitate to buy from etrailer again. The offset ball helped a lot, I didn't think I would be able to leave tool box on truck but had plent of clearance.
by: Homer 08/29/2023
Got what I ordered four days after it was promised
by: Daniel01/04/2019
Curt 4" offset ball Haven't had a chance to use it. Looks as if it will fill my needs
by: Diana 09/27/2018
This is for my 4' square hole trailer hitch extension. I love the fact that I can turn my trailer without breaking the back window. I had never seen a square hole before and this item came that way. I only wish they did one 6"-8" longer. But so far so good.
by: Joseph M11/06/2014
This is a must have with 5 1\2 bed
by: Dusty08/29/2019
The hitch is made really well and seems to be heavier than the b&w one I had in another truck. The offset makes it easier to pull a gooseneck trailer with my shortbed truck and gives me a better turning radius.
by: Luke01/16/2017
Everything installed as advertised. Did all on my own just take your time and you will be fine also. 2006 duramax crew cab use for horse trailer and flatbed gooseneck.
by: Terry02/15/2019
When you order products from etrailer you won’t be disappointed. A real live person actually answers the phone!!! Lisa answered our call and was friendly, curteous and very knowledgeable about the hitch extender I needed. She said it would arrive Tuesday and IT DID!!! I definitely recommend etrailer !!!
by: Neil09/22/2020
Excellent solution! Installed on 2010 Dodge Ram 1500 quad cab. Now I won't hit cab of truck with 5th wheel camper!
by: Don10/31/2017
The Curt goose neck hitch is a great product built very well. etrailer was a pleasure to work with delivering the product to my doorstep on time and complete. I would definitely use them again in the future.
by: Steven Lee02/24/2017
I usually pull my trailers with a long wheelbase truck but my newest truck is a short bed. The hitch is too far forward but this works perfect pulling the horse trailer.
by: Chris04/14/2018
I can use this with my offset hitch to get more clearance on my truck
Chris
4/17/2019
It works great and really glad I bought it with my shortened truck
by: David04/10/2020
Needed a little more room for the square front on the trailer. I was surprised how much sharper I can turn comfortably with only 4 inches more set back. Shopping on etrailer sight was easy and enjoyable.
by: Sam Liming05/27/2014
The hitch fit like it was supposed to. It has load limits on the hitch and the ball so you cannot forget it. I like that.
by: David01/08/2023
Absolutely loved it! Very happy with my purchase. Everything I thought it would be.
by: Milton09/29/2018
Great product from curt... Drops right in..
Shipping was on time... A+++
Needed for the short bed!!
by: DJ09/29/2018
Great product from curt... Drops right in..
Shipping was on time... A+++
by: Dave H06/23/2015
Works well to give needed room for short box pickup and Fifth wheel camper.
by: Deidra02/27/2019
this isn't my first order from etrailer, always fast delivery and great prices. Products are as described on page and so far all have been solid quality parts.
by: Mike 11/15/2021
Fit perfectly with my spray in bed line r.
by: Paul 11/19/2020
Heavy Duty! Works great to give me the extra inches I need for clearance in my short bed truck.
25
56
Show More Reviews
See what our Experts say about this CURT Trailer Hitch Ball
- Recommended Curt Gooseneck Hitch for 2018 Chevy Silverado 1500 with 5-1/2 Foot BedI do have a solution for you, however the Curt Double Lock Underbed Gooseneck Hitch # C607-604 referenced in your question is only designed to fit the 2018 Silverado 2500 or 3500 that features a longer bed. It will not work on your Silverado 1500 that has the 5-1/2 foot bed. For the Curt Double Lock Gooseneck Hitch that is designed to fit your truck you instead need the part # C615-632. This is confirmed to fit and includes custom brackets that use existing holes in the truck's frame...
view full answer... - Is Curt Gooseneck Hitch C60733 for 2006 Dodge Ram 1500 Compatible With Air Lift Air Bags AL57230I double-checked for you and can confirm that the Air Lift LoadLifter 5000 Air Helper Springs # AL57230 on your 2006 Dodge Ram 1500 are completely compatible with the Curt Double Lock, Flip and Store Underbed Gooseneck Hitch with Installation Kit # C60733. This is a really nice option for a hitch because it uses two pins to hold the hitch ball in place for added security, and is a below-bed mount which means you'll have a nice, clean bed when you aren't using the hitch for towing. The...
view full answer... - Gooseneck Hitch Ball Recommendation for Curt Gooseneck with Taller HeightSince you have a Curt gooseneck hitch the best option we have would be the Curt 4 inch offset double lock ball part # C602 which has a 4 inch offset and sits taller than the standard hitch balls.
view full answer... - Comparing Curt Double Lock Gooseneck Hitch # 60720 to # 60683The Curt Double Lock # C60720 and the Curt EZr Double Lock # C60683 are basically the same gooseneck hitch. The difference is in the installation. The EZr gives you the ability to ensure the hole you drill in the bed is perfect without the need to measure. It instead uses the Center locator tool that allows you to drill from the bottom up for a perfect fit. The regular Double Lock system simply requires measuring and then you drill from the top down. If you are good with a tape measure,...
view full answer... - Installing the Curt Underbed Gooseneck Hitch on 1993 Ford F-250You can install the Curt Double Lock Underbed Gooseneck Hitch w/ Installation Kit # C60723 in your 1993 Ford F-250 without removing the truck bed. The majority of the installation involves mounting the brackets to the frame and that is done from underneath the truck. You will need to drill a 4" hole in your truck bed though for the gooseneck hitch. Also, if you have overload springs, this hitch requires drilling two holes into the frame. If you want to use this truck for fifth wheel...
view full answer... - Does Wheel Well of 2001 Dodge Ram Need to be Cut to Operate Underbed Gooseneck Hitch BallTo activate the lever for the underbed gooseneck ball, you will need to cut the wheel well liner of your 2001 Dodge Ram when you install the underbed Curt Double Lock, Flip and Store Underbed Gooseneck Hitch with Installation Kit # C60734. This is needed for you to be able to easily reach the hitch ball's lever. I have added a link to the instructions as well as a video review for you to check out if you'd like of the Curt Double Lock, Flip and Store Underbed Gooseneck Hitch with Installation...
view full answer... - Offset Hitch Gooseneck Ball and 5th Wheel Trailer to Gooseneck Hitch AdaptersThe Curt offset ball, # C602, is designed for use with the Double-Lock, Flip and Store gooseneck hitches. If you have a different hitch then this ball is not going to fit. You will need to go by the hitch manufacturer to get a compatible ball. If the trailer is a 5th wheel trailer and not a gooseneck trailer then you will need an adapter to be able to tow the trailer. A 5th wheel king pin is not compatible with a gooseneck hitch ball. The best option is the Goosebox, # RP85FR, for Lippert...
view full answer... - Can a 5th Wheel Hitch be Installed on a 2013 Ram Longhorn 4x4 with Air Suspension PackageSine your 2013 Ram has the air suspension package you will not be able to install a 5th wheel trailer hitch. The option left is a gooseneck hitch, # C607-658. Ultimately, a gooseneck hitch is going to cost less so that is a positive aspect. If you still wanted to go with a 5th wheel hitch then what you could do is go with the gooseneck hitch above and then use the Curt X-5 adapter, # C16210, which was designed to fit the Curt Double-Lock, Flip, and Store hitches. Using the X-5 adapter...
view full answer... - How To Get More Turning Clearance Using the Curt Double Lock Gooseneck Hitch for a 2000 Ford F-350The Curt Double Lock, Flip and Store Underbed Gooseneck Hitch part # C60720 which is a fit for a 2000 Ford F-250/F-350 can only be installed one way. Therefore, you can't flip the center section to get more turning clearance. That said, I do have an option for you to increase turning clearance and that is to use the Curt 4" Offset Ball for Double-Lock Gooseneck Hitch part # C602 which will provide an extra 4" of offset.
view full answer... - Gooseneck Hitch For a 2023 Chevrolet Silverado 2500 With No Factory Prep PackageWe have a gooseneck hitch confirmed to fit your 2023 Chevrolet Silverado 2500 with no factory prep. - Curt EZr Double Lock Underbed Gooseneck Trailer Hitch # C65HR This gooseneck hitch has an underbed mount style and double-lock system that provides added security with 2 pins holding the ball in place instead of 1. You can also flip the ball over upside down for storage to free up your truck bed. There is also an adapter plate that allows for 5th wheel Towing - Curt X5 5th-Wheel Base...
view full answer... - Gooseneck Hitch For Nissan Titan With 5-1/2 Foot BedThe Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit # C620-664 is one of the only hitches on the market that will work with the 2007 Nissan Titan 5-1/2 Foot Bed. This product has a removable 2-5/16 hitch ball that stores in the hitch. There is no drilling required to install the frame brackets of the installation kit. the Installation rails are rated to meet vehicle manufacturer's tow rating. (see vehicle owner's manual) If you need wiring Curt 5th Wheel/Gooseneck...
view full answer... - Needing a Gooseneck Hitch to Fit a 2012 Ram 1500 w/ 5-1/2 Foot BedFor the 2012 Ram 1500 with the 5-1/2 foot bed, Curt Double Lock, Flip, and Store Underbed Gooseneck Hitch, # C60730, is compatible for your vehicle per the installation instructions. Since your vehicle has the short bed, I recommend The Curt 4 Inch Offset Ball, # C602. This offset ball will provide you with an additional 4 inches of space between your gooseneck trailer and the cab of your Ram 1500.
view full answer... - How Come Curt Offset Ball # C602 Is Taller than Standard Gooseneck BallYes, the additional height of the Curt 4" Offset Ball for Double-Lock Gooseneck Hitch # C602 is due to the offset plate needing to be tall enough to fit over the top of the truck bed. The additional height is right right at 3/4 of an inch like you stated.
view full answer... - Which Offset Gooseneck Hitch Ball Will Fit the Factory Prep/Puck Hitch In My 2021 Ram 3500 Dually? To use a offset gooseneck ball on your 2021 Ram 3500 you will need to replace the factory gooseneck hitch with a B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1320. The B&W hitch mounts in the same place as the factory hitch, and does not affect the outer 4 mounting holes for a 5th wheel hitch. This will allow for you to use their 4" Offset Ball # BWGNXA4085. You can use the Reese Safety Chain Holder # RP30145 in the factory puck holes if you do not want to drill for the safety...
view full answer... - Offset Gooseneck Ball Recommendation for Draw Tite Hitch in 2016 Ram 3500If the gooseneck hitch you had was the Draw Tite Hide-A-Goose style of hitch the offset gooseneck ball part # 19308 would fit and work well. The hitch you'd have to have installed in your 2016 Ram 3500 would be the part # 9466 which is the correct fit for your truck. Reese does not make a gooseneck hitch for your truck but Draw Tite and Reese are made by the same company.
view full answer... - Are Ford and Ram OEM Gooseneck Hitch Compatible with Offset for Better Turning ClearanceThe Curt 4" Offset Ball for Double-Lock Gooseneck Hitch # C602 is available only if you have the double-lock model. The other Curt models that drop in and lock through the ball lever like # C60601 featuring the Pop-In or OEM Underbed System will not have the offset option available, so it is a bummer the dealer didn't give you what you asked for with your 2018 Ram 2500 Laramie. To give you the clearance you desire, the other option is to use a gooseneck coupler offset like # BWTEXA4200...
view full answer... - Gooseneck Hitch Recommendation for a 2006 Chevy Silverado 1500 with 5-1/2 ft BedI did some checking and the only confirmed fit I could find for a gooseneck hitch for your 2006 Chevy Silverado with a 5-1/2 foot bed is the Curt Hitch part # C60712. For additional clearance you will most likely need the part # C602.
view full answer... - Increasing the Clearance of an Andersen Ultimate 5th Wheel Hitch with an Offset BallI called Andersen to confirm. If you are wanting more clearance for your Andersen Ultimate 5th wheel hitch, then using an offset ball like the Curt 4" Offset Ball for Double-Lock Gooseneck Hitch, part # C602, is exactly what you need. This should work perfectly for you. I've linked to a video review of the offset ball for you to look at.
view full answer... - Gooseneck Hitch Recommendation for a 2006 Chevy Silverado 5-1/2 foot BedThe only gooseneck hitch and install kit we offer that has been confirmed to fit your 5-1/2 foot bed 2006 Chevy 1500 Silverado is the Curt Hitch and Install kit part # C60712. This comes with the hitch and rail kit so there wouldn't be any additional products needed for installation. For added clearance you would also want the part # C602.
view full answer... - Offset Hitch Ball Fitment for Curt Double-Lock Gooseneck HitchThe 5" Offset Ball # 19308 will only work with the Bulldog, Draw-Tite, Hidden Hitch, and Reese Hide-A-Goose gooseneck trailer hitches do to the dimensions of the shank and the location of the hitch pin hole. If you have the Curt Double-Lock Gooseneck Hitch then you can use the Curt 4" Offset Ball # C602 instead as it is designed specifically for this Curt hitch. Unfortunately if you have something different then there isn't a solution for an offset ball, but we might still have an alternative...
view full answer... - Gooseneck Hitch Fit for 2015 Chevrolet Silverado 3500 Dually Long-Bed PickupCurt Double Lock Flip and Store Underbed Gooseneck Hitch # C607-604 is a confirmed fit for your 2015 Chevrolet Silverado 3500 dually long bed. The linked video shows installation in a 2013 Sierra. This hitch is compatible with Curt's accessories like their X5 5th Wheel Adapter # C16210 and their 4-Inch Offset Ball # C602. If you also need a wiring harness for the truck you can use part # C56000.
view full answer... - Recommended Gooseneck Hitch For 2006 Chevrolet Silverado 1500HDFor your 2006 Chevrolet Silverado 1500 HD I recommend the Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit # C60712 which is confirmed to fit your 1500HD as long as it has the 6-1/2' bed. The # C60712 has a 30000lb towing capacity and uses two pins to hold the hitch ball for extra security. The included 2-5/16" hitch ball can be stored in the hitch by turning it over to allow you to use your bed with nothing in the way. Another great feature is you can use...
view full answer... - Why isn't There Offset Gooseneck Ball that Fits 2019 Ford F-250 OEM GooseneckThe reason there are no offset gooseneck balls that fit the OEM gooseneck hitch of your 2019 Ford F-250 is because the shape of the gooseneck ball that fits your hitch being round. Since it's round and can rotate in the hitch any offset could rotate forward and offset in the wrong direction. This is why it's only the square shank balls that can have an offset.
view full answer... - Will A Curt Offset Gooseneck Ball Fit Into A B&W Gooseneck HitchI called my contact at Curt Manufacturing and they confirmed that the Curt 4" Offset Ball for Double-Lock Gooseneck Hitch part # C602 will not fit into the gooseneck ball location on a B&W gooseneck hitch such as the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1012. This is due to the fact that the Curt ball mounts for gooseneck hitches are circular in shape whereas the ball mounts for B&W gooseneck hitches are square. In order to gain a 4" offset with the B&W gooseneck...
view full answer...
Do you have a question about this Trailer Hitch Ball?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Installed by:
Jeff D
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Daniel
1/5/2020
Works great Thank you