Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"
(122 reviews)
Price: $417.02
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"
Item # C15800
Retail:$588.95
Our Price: $417.02
You Save: $171.93
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (122)
- Q & A (0)
- Photos
CURT Trailer Hitch - C15800
- Class V
- 2-1/2 Inch Hitch
- 20000 lbs GTW
- Visible Cross Tube
- CURT
- 2700 lbs TW
- 20000 lbs WD GTW
- 2700 lbs WD TW
- Custom Fit Hitch
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin, and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2-1/2" x 2-1/2"
- Rating: Class V
- Maximum gross trailer weight: 20,000 lbs
- Maximum GTW when used with weight distribution: 20,000 lbs
- Maximum tongue weight: 2,700 lbs
- Maximum TW when used with weight distribution: 2,700 lbs
- Maximum gross trailer weight: 20,000 lbs
- Limited lifetime warranty
Note: Fits models with a 34" wide frame.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
15800 CURT Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty- 2-1/2"
Replaces 15830 Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty- 2-1/2"
Installation Details
This Product Fits The Following Vehicles
- 2010 - 2024 Ram 3500 Cab and Chassis
- 2010 - 2024 Ram 4500
- 2010 - 2024 Ram 5500
- 2008 - 2009 Sterling Bullet
- 2007 - 2014 Dodge Ram Pickup Cab and Chassis
- 2001 - 2013 GMC Sierra 3500 - Cab and Chassis
- 2014 - 2024 GMC Sierra 3500 Cab and Chassis
- 2007 - 2007 GMC Sierra Classic 3500 - Cab and Chassis
- 2007 - 2007 GMC Sierra New Body 3500 - Cab and Chassis
- 2001 - 2013 Chevrolet Silverado 3500 - Cab and Chassis
- 2014 - 2024 Chevrolet Silverado 3500 Cab and Chassis
- 2007 - 2007 Chevrolet Silverado Classic 3500 - Cab and Chassis
- 2007 - 2007 Chevrolet Silverado New Body 3500 - Cab and Chassis
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Arrived Damaged
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" - C15800
Average Customer Rating: 4.7 out of 5 stars (122 Customer Reviews)
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Braxton02/26/2023
Great product, great quality, comes with all mounting hardware. Free shipping and was delivered just two days after ordering. Only complaint is that it’s advertised to only have to drill out the rivets in the back of the frame but on my truck (2022 ram 4500) you have to drill every hole. Also says you need a 25/32” drill bit which to me is too big, I used a 5/8” and the hole is the perfect sizeOther than that it was easy to install as long as you have the right tools. I order all my hitches and related products from etrailer and will continue to do so.
by: Jarvis05/05/2023
2009 Chevrolet Silverado
The hitch was good. The holes didn't all line up. The directions called for 19/32 drill bit that was too small for the bolts supplied. It was a 5/8ths bolt and so i needed the same size drill bit. The box was beat up and the hitch busted through the box. The hitch had scratches that broke through the paint. Send some padding in the future.
Jenny N.
5/12/2023
It sounds like the side brackets could have been flexed out of alignment since the hitch had also broken through the box. We do have a FAQ that can help with that. I will also have Customer Service reach out to you about the scratches that the hitch received.
Helpful Links
by: LU Transportation12/04/2022
Great customer service, incredible product. Delivery was early. Thank you for everything!!
Lu T.
12/5/2023
Great
by: William B01/20/2017
Dodge Ram Pickup
2016 Dodge Ram Chassis Cab, 9' bed, 34" frame rails.
Extremely beefy trailer hitch. Easy to install, especially with no bed on the truck. The two rear rivets on the Ram frame rail are time consuming to drill out. Clears the rear 52 gallon fuel tank with no problems. It should be noted that the holes where the safety chains would hook are very beefy as well so small chain hooks will not work. Shackles will solve that proble and be more secure at the same time. I'm very happy with my purchas of this hitch and etrailer.com did a great job helping me find the correct hitch and shipping it out fast.
AllYourBaseAreBelongToUs
by: Frank B.10/27/2016
2015 Chevrolet Silverado 3500
This is and always has been a superior product for my use. This hitch is ultimately the best choice to put on our Semi Trucks. It gives me the ability to haul more freight. Now I can haul any reciever hitch or pintle hook load along with my standard 5th wheel loads.
Being in the Power Only industry versatility is key to our business... Outstanding Product
by: Cameron 01/20/2024
Very well built, heavy, didn't fall off. Would tow again
by: Martin 04/18/2023
2006 Chevrolet Silverado
This trailer hitch is very well built.
Always concerned when pulling a heavy load down the highway. This hitch is rated for as much weight as my one ton truck is. I have no doubt this hitch will last as long as the truck
by: David05/05/2020
2001 GMC Sierra
Came earlier than expected. Fit my 01 gmc 3500 cab and chassis great. Easy install. Found it cheaper here than anywhere else. etrailer is always the first place I look when I need just bout anything for my truck or rv.
by: Robert 06/11/2023
The product is excellent
The instructions say a professional can install in 30 minutes which is impossible because it will take an hour, or more, just to drill holes
by: Jesse10/16/2019
Just received the hitch. Looks heavy duty. etrailer was fast, friendly, and very helpful. Big thumbs up! Can’t wait to install it this weekend.
by: Marcos 12/18/2022
Dodge Ram Pickup
I purchased this hitch for my 2022 Ram 5500. The hitch arrived lightning fast and installation was very simple. The hitch arrived with all the necessary Grade 8 bolts and the entire installation took less than 30 minutes. I did have to drill two holes but that was no issue and it was probably due to the fact that I have a cab and chassis model. The hitch is nice and square and tows well. After a trip from Texas to Washington state all the hitch bolts are still tight and the hitch is still nice and square and the finish looks resilient.
by: Kendall01/05/2023
2022 Ram 5500
NOT PACKAGED WELL. IT WAS MISSING AND DIRECTION/PAPERWORK AND THE HARDWARE WAS NOT INCLUDED.
Katrina B.
2/10/2023
It looks like we missed the boat on this one. I will have our customer service department reach out to you to get this corrected.
by: Joe A11/28/2023
fit good and was promptly delivered.
by: Kevin 10/10/2023
i think it needs side plates also
by: Cyrus09/01/2023
took longer to install than what it said , but that's typically the case. It was a relatively smooth install. I just takes a minute to drill through frame metal.
by: Gregory03/09/2023
Delivery was very fast. Just wanted everyone to know drilling is required. Or I guess you could have it welded on. Not my choice in case of damage to hitch.
by: August 06/21/2023
Very sturdy, good welds, easy install with no mods required.
by: Armando 09/28/2023
Great product
by: Christian07/25/2022
It was a perfect fit for my M35A2 could not ask for anything better will recommend to all my friends
by: Alan09/22/2022
Fitment of the hitch was as advertised. Shipping was quick (A day earlier than expected). So far we have ordered multiple hitches and axle parts from e trailer and never been disappointed with any of them. Keep up the good work guys. You are our go to trailer and hitch company.
by: Todd M.03/17/2015
2015 Chevrolet Silverado 3500
Hitch was installed on a 2015 Chevrolet 3500 with dual fuel tanks.
This hitch fit behind the fuel tank skid plate mounting bolts without relocating the skid plate mounts. The middle bolt lined up over the crossmember requiring a factory rivet to be drilled out, but the hitch is then mounted to two layers of frame
The hitch itself is very well made, the bolt flange is true to the truck frame, good mounting hardware included. it has a flat bedliner type finish on it.
by: Craig 06/15/2023
2023 Ram 5500
it fit- required drilling holes in Frame but everything looks good
by: Eric 08/17/2021
The receiver hitch is heavy duty and looks to be well built. It fit perfect on my truck, the only tough part about it was working around the flatbed that I already have on the vehicle. So from my personal experience if you don't already have a bed on your truck, put the hitch on prior to putting the bed. It would make the install process much easier. Overall a great product and I would recommend to anyone in the market.
by: Corey03/08/2020
etrailer had the best price for this hitch everywhere else was over $300 before shipping I got the hitch and 3day shipping for $xx.xx and some change.. install was easy but drilling the frame is pain in the butt just because of how solid the metal is.. the instructional video explained everything I needed to know and made the install a breeze.. instructions do come with the hitch however I only referred to them for torque specs.. if you’re mechanically inclined you and a buddy can have this installed in no time.. THIS HITCH WILL WORK WITH A SERVICE BODY THAT HAS A REGULAR J-MODEL BUMPER WITH LITTLE TO NO ISSUE.. I replaced a jerry-rigged POS hitch some “fabricator” made that ultimately almost destroyed the bumper and could’ve killed someone
by: Kenneth05/25/2023
The only thing wrong was that it came with no packing, the part is subject to get scratched or broken when sent that way. Customer service rep was great though.
25
122
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Recommended Trailer Hitch for a Volvo D13 Semi-TrailerI do have an option for you but the Curt Trailer Hitch Receiver part # C15800 is designed for passenger vehicles like the Ram 3500, Chevrolet Silverado 3500, and GMC Sierra 3500 so it will not fit your 2009 Volvo D13. However, what you can use is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41991-16 which has adjustable side brackets that can be positioned to match the frame on your Volvo D13. The side brackets can then either be welded or bolted to the frame or...
view full answer...
- Hitch Fit for 2012 Chevrolet Silverado 3500 Cab/Chassis Fitted With Dump Body and Rear Fuel TankWe do offer both Class IV and Class V trailer hitches for the 2012 Silverado cab and chassis. All can be seen on the link provided. All require drilling and that the spacing of your frame rails be 34-inches outside to outside. The most popular among them is the Curt # C15800 which is a 2-1/2-inch Class V hitch. Please note that one of these, part # 41936 from Draw-Tite, cannot be used with your rear fuel tank-equipped Silverado, but the others do not have this exclusion. I have linked...
view full answer... - Recommended Hitch for a 2023 Ram 5500I have a couple of options for hitches for your 2023 Ram 5500 depending on whether or not you want a 2" receiver or a 2-1/2" receiver. I have listed both options below: 2" Hitch - Curt Trailer Hitch Receiver item # C15400 2-1/2" Hitch - Curt Trailer Hitch Receiver item # C15800 If you are wanting a hitch that has both a 2" and a 2-1/2" receiver then you will need the TorkLift SuperHitch Original Trailer Hitch Receiver item # TL49YR.
view full answer... - Trailer Hitch Recommendation for a 2016 Chevrolet Silverado 3500 HD TruckI can help you find a hitch that will fit your 34 inch outside to outside measurement on your 2016 Chevy 3500 HD. It sounds like you have a Cab and Chassis style Chevy, because of the 34 inch wide outside to outside frame. I have listed the trailer hitches below that will fit your vehicle, but the Reese RP45302 is not one of them. I also included a link on this page to take you directly to the page of the 5 hitches that will fit your vehicle for your convenience. 2 inch receiver opening: Draw-Tite...
view full answer... - Mounting Flange Dimensions of Curt Hitch # 15800The mounting flanges of the Curt hitch part # C15800 are 11.6 inches in length. This is a fit for your 2022 Chevy Silverado 2500 cab and chassis model.
view full answer...
- Class V Trailer Hitch Recommendation for 2016 Ram 5500 Cab and ChassisThe Super Titan hitch, # 38208, is designed for C channel style frames approximately 34 to 34-1/2 inches wide. This is measured from outside to outside of the frame rails. This is the common frame size for cab and chassis trucks so in that regard it would fit your 2016 Ram 5500. Based on the pictures you sent in and the dimensions of this hitch that we are aware of I can tell this won't clear your fuel tank. You would need to go with a Class V hitch that was designed to fit your truck....
view full answer...
- Recommended Trailer Hitch Compatible 2007 GM with 34 Inch Frame ChassisThe 34 inch from outside to outside is a cab and chassis frame will allow for a few hitch fits. I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" # C15800. This has dimensions to fit your frame. I've attached a diagram to assist. You may be interested in # C22277 when not in use.
view full answer...
- Availability of a Class V Hitch for 2014 GMC Sierra 3500It sounds like you may have a GMC Sierra 3500 Cab and Chassis rather than a long-bed pickup. If this is the case we do offer Class V hitches, both 2-inch and 2-1/2-inch types. The link provided will let you see all three available Class V hitches from Curt and Draw-Tite. These range in their tongue weight and towing capacities and all require drilling for installation. Please let me know what size receiver you need and the specifics about your vehicle and I can confirm a fit.
view full answer... - Pin-Style Hitch Lock for 2012 Dodge Ram PickupThe 2012 Dodge Ram can be fitted with either a 2-inch hitch like # 41948 or a 2-1/2-inch Class V hitch like # C15800. For a pin style hitch lock that will fit a 2-inch hitch you can use # e98880 and for one that will fit both a 2-1/2-inch and a 2-inch you can use # e98881.
view full answer... - Class V Trailer Hitch for a 2011 Dodge Ram 2500 with OEM Trailer HitchCurt trailer hitch # C15800 is designed to fit cab and chassis models. Cab and chassis models have a more narrow frame width compared to regular pickups. If you do not have a cab and chassis model this hitch will not fit. For a regular pickup version of the 2011 Ram 2500 with the OEM hitch you can install Curt hitch # C15809. It will fit beneath the factory hitch. I have included links to the instructions and an installation video for you to view. I also recommend etrailer ball mount...
view full answer... - Highest Capacity Hitch Availability for a 1992 Ford F-350The highest rated hitch we offer for your 1992 Ford F-350 that has been confirmed to fit your frame width would be the Curt Hitch # C15300. This bad boy has capacities of 2,400 lbs tongue weight and 16,000 lbs total trailer weight. However this is a 2 inch hitch. This hitch is specifically designed to fit the larger 37-1/4 inch frames like you have. There will be some drilling required for installation. Check out the install video I attached. Another heavy duty hitch you may want to consider...
view full answer... - Curt Class V Hitch that Fits 2021 Ram 4500Yes, the Curt Class V hitch part # C15800 that you referenced is a confirmed fit for the 2021 Ram 4500 cab and chassis models like what you have.
view full answer... - Class V Trailer Hitch With 2-1/2 Inch Receiver Opening for 2016 Chevrolet Silverado 3500 The Curt Trailer Hitch Receiver, part # C15800 is a fit for your 2016 Chevrolet Silverado 3500 Cab and Chassis. This is a Class V hitch and it has a 2-1/2 inch receiver opening. All of the hardware needed for installation of this hitch is included. I have attached a link to our product page for ball mounts that are designed to fit a 2-1/2 inch receiver. I also attached a link to a helpful article that explains how to determine which ball mount will work best for you.
view full answer... - Recommended Class V Trailer Hitch for a 2009 Chevrolet Silverado 3500 DuallyYes, the Curt Trailer Hitch Receiver # C15800 you mention will work great as a class V hitch for your 2009 Chevrolet Silverado 3500. This hitch has a maximum GTW of 20,000-lbs, a maximum tongue weight capacity of 2,700-lbs, and has a 2-1/2" x 2-1/2" receiver opening.
view full answer... - Recommended Hitch for a 2011 Itasca Suncruiser 35P MotorhomeYes, there is and you are in luck because there is a custom fit option. The Curt Trailer Hitch item # C14082 will bolt directly to the frame of your 2011 Itasca Suncruiser 35P. This is a class IV hitch with a 2" receiver. It has a 10,000 lbs towing capacity and a 1,000 lbs maximum tongue weight. The Curt Trailer Hitch item # C14082 fits frames that are 34" wide. It also does require drilling as there are no predrilled holes for a hitch. If your frame is wider than 34" you will need to...
view full answer... - Trailer Hitch Recommendation for 2008 Chevy Silverado with Service BodyWe have a solution, but the utility body trucks do not have custom hitches made for them. There are only multi-fit hitches that will fit that type of vehicle. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
view full answer... - How Does a Curt Trailer Hitch Install on a 2012 Dodge Ram 4500 Cab and ChassisIn order to install Curt trailer hitch # C15800 on your 2012 Dodge Ram 4500 cab and chassis model you will have to drill into the frame because, like you have said, there are no holes in the frame already. The rivet that is in the rear most part of the frame also will come out and get replaced by a bolt. Installation is very similar to hitch # C15400 (just the capacities are different) and I have linked the instructions for it for you to view. The hitches install with 3 bolts on each...
view full answer...
- 2007 Dodge Ram 3500 Class V Hitch Options from CurtThe Curt hitch part # C15800 does fit a 2007 Dodge Ram 3500 but only if the vehicle was a Cab and Chassis model which means it was sold without a truck cab and the frame dimensions are 34 inches apart measured from outside to outside. For a similar Class V hitch for a non-cab and chassis style truck you'd want the part # C15409 which fits if the truck came with a factory hitch or did not come with one. This hitch has capacities of 17,000 lb total trailer weight.
view full answer... - Comparing the Curt Trailer Hitch Receiver Part # C15800 and C15400The Curt Trailer Hitch Receiver part # C15400 and the Curt Trailer Hitch Receiver part # C15800 are the exact same trailer hitch save for one has a 2" receiver tube opening and the other a 2-1/2" receiver tube opening. The dimensional drawing that I have attached for you is accurate for both trailer hitch receivers. They will both line up with the frame on a 2008 Chevrolet Silverado 3500HD Cab and Chassis but you will need to make sure the receiver tube opening does not interfere with the...
view full answer...
- Trailer Hitch for 2019 Ram 5500 We do have a Class V that fits the 2019 Ram 5500 but the Curt hitch part # C15800 is not a fit. I confirmed with Curt that the Class V hitch receiver part # C15400 fits the 2019 Ram 5500. The Curt Hitch Receiver part # C15400 can handle up to 2550 lbs of tongue weight and the installation does not require drilling. It is designed for a cab chassis model that has a 34 inch frame outside to outside. I have attached a video of the installation process.
view full answer... - Is the Curt Hitch C15800 Designed to Fit Standard 2019 Ram 3500 PickupIf your 2019 Ram 3500 is a pick-up truck the Curt Class V Receiver Hitch part # C15800 is not a fit because it fits the cab and chassis model of the Ram 3500 which have a 34" wide frame. If your truck is a cab and chassis with 34" wide frame the Curt receiver is a great choice. I have attached a video of the hitch installed on a cab and chassis for your reference. It sounds like your truck is a 2019 Ram 3500 pick up. If it is a short bed model with a 6-1/2 ft bed, I recommend Curt Trailer...
view full answer... - Class V Trailer Hitch Receiver for 2009 GMC Sierra 3500HD Work TruckThe # C15800 is specifically designed to fit the cab and chassis models and is not a fit for your 2009 GMC Sierra 3500HD WT. The WT should have the same attachment points as the 3500 Pickup so the Curt Trailer Hitch Receiver # C15703 would be the correct hitch. This is also a Class V hitch with a maximum gross trailer weight of 18,000 lbs and max tongue weight of 2,700 lbs.
view full answer... - Curt Trailer Hitch Recommendation to Fit 2010 Chevy 2500HD with 34 Frame Rail DimensionsThe 34 inch frame width you have means that you have a Cab and Chassis 2010 Chevy Silverado 2500HD. That means that the hitch you would need is the part # C15800 as it is designed for this style of vehicle whereas the part # C15312 you mentioned is for wider frames.
view full answer... - Draw-Tite Class V, 2-1/2" Trailer Hitch Needed for a 2015 Chevrolet Silverado 3500 HDI do have a solution for you, but the Draw-Tite Trailer Hitch Receiver # DT45508 that you referenced is a fit for Ford pickups and will not fit your 2015 Chevrolet Silverado 3500 HD. The Draw-Tite Trailer Hitch Receiver that fits your Silverado 3500, whether it has a 6-1/2 foot or 8 foot bed, is part # DT45511. This is a Class V hitch with a 2-1/2" receiver opening. It has a Gross Towing Weight (GTW) of 20,000 lbs and a Tongue Weight (TW) rating of 2,700 lbs. You will want to check your...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Video by:
Dustin K
Video by:
Jonathan Y
Test Fit:
Shane T
Test Fit:
Shane H
Test Fit:
David F
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Braxton
2/27/2024
Still doing great, looking to get one for my 08 ram 3500