Comparing the Curt Trailer Hitch Receiver Part # C15800 and C15400

Question

Question:

Hello, I see the main difference between these 2 hitches is the 2inch vs. 2 1/2inch receiver tube. I was able to find a drawing showing all measurements of the 15800 on your site but have been unsuccessful in finding a drawing for the 15400. Is it possible to get one so I can confirm fitment on my application? Vehicle is 2008 Chevrolet 3500HD but has a custom bed on it so I need to confirm that everything is the same except for receiver size. Thanks for your help!!!

asked by: Chris

1

Helpful Expert Reply:

The Curt Trailer Hitch Receiver part # C15400 and the Curt Trailer Hitch Receiver part # C15800 are the exact same trailer hitch save for one has a 2" receiver tube opening and the other a 2-1/2" receiver tube opening. The dimensional drawing that I have attached for you is accurate for both trailer hitch receivers. They will both line up with the frame on a 2008 Chevrolet Silverado 3500HD Cab and Chassis but you will need to make sure the receiver tube opening does not interfere with the custom bed.

expert reply by: Conner L

1

click to enlarge

Answer 1

I can tell you how far the Curt #C15400 extends out from the frame and you can use that to determine the measurement to the end of the service body. We don't have information on the RKI S6080 or a way to determine that distance otherwise. The…

view full answer...

Answer 2

I was able to get a dimension sheet from my contact at Curt for the Curt Hitch part #C15800 that you referenced. See attached pic. I also attached a set of the installation instructions for this hitch.

view full answer...

Answer 3

On the Buyers Products hitch, part #3371801102, the mounting holes are 38-3/8 inches across center on center. Then on each side starting with the hole that's towards the rear of the vehicle they measure 3-11/16 inches from the first to the center…

view full answer...

Answer 4

I went out to our warehouse and measured the Buyer's Products hitch, part #3371801102, and it's 6-1/2 inches from the top of the mounting surface to the top of the reciver tube. Then it's about 9-1/2 inches to the bottom of the receiver…

view full answer...

Answer 5

The mounting flanges of the Curt hitch part #C15800 are 11.6 inches in length. This is a fit for your 2022 Chevy Silverado 2500 cab and chassis model.

view full answer...

Answer 6

From side to side, the mounting holes measure 31-1/4 inches apart, center to center. All three sets of holes are the same distance apart. From rear to front, beginning at the rear of the vehicle the distance from the first set of holes to the second…

view full answer...

Answer 7

Sorry to hear about the trouble you're having, but I did go ahead and confirm that the Curt Trailer Hitch Receiver #C15400 will fit your 2022 Jayco Seneca 37K Motorhome. This hitch is not universal and it is a custom fit hitch, so you can expect…

view full answer...

Answer 8

The Buyers Products 2" Hitch Receiver For GM Express/Savana with Cutaway Chassis #3371801102 you were looking at measure 39" from center to center of the mounting holes as you can see in the included diagram, so depending where you measured…

view full answer...

Answer 9

Since your truck frame is 34 inches from outside to outside that means that it originally was a cab and chassis truck. I have a solution for you, but it will require you drill some holes in the frame. The Curt hitch part #C15400 has a drop of 6-1/4…

view full answer...

Answer 10

The Curt #C14048 measures 16-1/16 inches from the back to the center of the 3 front holes. Those front holes are all 1-1/2 inches on center so you technically could use the 14.565 inch measurement. There is not one that is closer to 15 inches in…

view full answer...

Answer 11

The distance between the mounting holes from side to side on the Draw Tite trailer hitch part #41945 are 38-1/2 inches. This hitch fits the following vehicles: 2004 - 2014 Ford Van E-150 2004 - 2014 Ford Van E-250 2004 - 2014 Ford Van E-350 2000 -…

view full answer...

Answer 12

I checked with Curt and they sent me the following dimensions based on your picture for the #C15410. Red line measurement 10.55” Yellow Line measurement 5.32” Green Line measurement is 7.5”

view full answer...

Comparing the Curt Trailer Hitch Receiver Part # C15800 and C15400

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching