Curt Class V Hitch that Fits 2021 Ram 4500

Question

Question:

will this fit a 22 Ram 4500, C15800

asked by: Jorge M

1

Helpful Expert Reply:

Yes, the Curt Class V hitch part # C15800 that you referenced is a confirmed fit for the 2021 Ram 4500 cab and chassis models like what you have.

expert reply by: Jameson C

1

Answer 1

The Curt Trailer Hitch Receiver part #C15400 and the Curt Trailer Hitch Receiver part #C15800 are the exact same trailer hitch save for one has a 2" receiver tube opening and the other a 2-1/2" receiver tube opening. The dimensional…

view full answer...

Answer 2

In order to install Curt trailer hitch #C15800 on your 2012 Dodge Ram 4500 cab and chassis model you will have to drill into the frame because, like you have said, there are no holes in the frame already. The rivet that is in the rear most part of…

view full answer...

Answer 3

Thank you for the photo, and while there is a 2-1/2 inch trailer hitch receiver that fits your 2021 Ram 5500 cab & chassis, I checked with the manufacturer, and the TorkLift hitch you mentioned will not fit. So for a 2-1/2 inch hitch, you…

view full answer...

Answer 4

I went to our warehouse and took a couple of measurements of the part #C15800. I have attached a photo of the trailer hitch and it has the dimensions noted. It measures 7 inches from the mounting lip to the top of the receiver opening and 9-1/2…

view full answer...

Answer 5

When installing a trailer hitch on your 2022 Chevrolet Silverado 3500 HD Cab and Chassis The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2 inch #C15800 is the correct hitch for you. This hitch is designed for heavy-duty…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Curt Class V Hitch that Fits 2021 Ram 4500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching