Recommended Trailer Hitch for a Volvo D13 Semi-Trailer

Question

Question:

Is Item # C15800 , compatible with a 2009 Volvo D13 tractor ? Looked on chart but Chevy, Ford and Dodge are not semi trucks.

asked by: Ken

0

Expert Reply:

I do have an option for you but the Curt Trailer Hitch Receiver part # C15800 is designed for passenger vehicles like the Ram 3500, Chevrolet Silverado 3500, and GMC Sierra 3500 so it will not fit your 2009 Volvo D13. However, what you can use is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41991-16 which has adjustable side brackets that can be positioned to match the frame on your Volvo D13. The side brackets can then either be welded or bolted to the frame or cross support on your 2009 Volvo D13.

expert reply by: Conner L

0

click to enlarge

Answer 1

We don't have hitch plates that were specifically designed to fit your 1991 Dodge Ram due to the age of it but we have fab options like the part #3371809040 which you could use to weld the plate to your truck and you'd be set.

view full answer...

Answer 2

I have attached for you below a detailed dimensional drawing of the Curt Trailer Hitch Receiver part #C15800 which is a confirmed fit for the vehicles listed below. The trailer hitch has a class V rating with 2-1/2" opening which is great…

view full answer...

Answer 3

I attached a dimensional drawing for the part #13465 for you to check out that I got from Curt.

view full answer...

Answer 4

I went to our warehouse and took a couple of measurements of the part #C15800. I have attached a photo of the trailer hitch and it has the dimensions noted. It measures 7 inches from the mounting lip to the top of the receiver opening and 9-1/2…

view full answer...

Answer 5

The Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper with 2" Receiver #3371809055 is designed or flatbeds and flatbed dump trucks. While it is ready to mount on Ford trucks, there is some drilling required for GM trucks. This hitch is…

view full answer...

Answer 6

The horizontal measurement from your photo for the Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper with 2" Receiver #3371809055 is 11". The vertical measurement you're looking for is 12-1/2". I have added…

view full answer...

Answer 7

The size of the bolts you'll end up using with the Buyers Products Hitch Plate part #3371809061A will depend on the application which is why they are not included or recommended. The other option is that you can have the hitch plate welded in…

view full answer...

Answer 8

The Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper #3371809055 is designed specifically for flatbeds, flatbed dump trucks and cab-and-chassis trucks with a nominal 34-inch frame width. I measured this hitch in our warehouse to give you its…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Recommended Trailer Hitch for a Volvo D13 Semi-Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching