Recommended Trailer Hitch Compatible 2007 GM with 34 Inch Frame Chassis

Question

Question:

Do you have a trailer hitch plate that fits a 2007 sterling l8500? The frame is 34 inches outside to outside. Thanks

asked by: Ross M

0

Expert Reply:

The 34 inch from outside to outside is a cab and chassis frame will allow for a few hitch fits. I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" # C15800. This has dimensions to fit your frame. I've attached a diagram to assist. You may be interested in # C22277 when not in use.

expert reply by: Jason S

0

click to enlarge

Answer 1

The Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" #C15810 is a fit for the standard or step bumper of your truck. With this hitch, spare tires 20" and larger will not be able to be stored in the original location underneath…

view full answer...

Answer 2

I have attached for you below a detailed dimensional drawing of the Curt Trailer Hitch Receiver part #C15800 which is a confirmed fit for the vehicles listed below. The trailer hitch has a class V rating with 2-1/2" opening which is great for…

view full answer...

Answer 3

We do not have the measurements for the OEM hitch available to compare however, I can tell you that the Curt Class V Trailer Hitch Receiver, #C15801 is 8-1/2" from the top of the brackets to the top of the receiver tube. Please note the attached…

view full answer...

Answer 4

The distance from the top of the receiver to where it would mount on the bottom of the truck is 6" on the #C15845 Curt Trailer Hitch Receiver. The distances between the mounting bolts vary so I am attaching a picture showing the different…

view full answer...

Answer 5

The Curt Front Mount Trailer Receiver, item #31042, is designed to fit the 1997 Chevy K3500 4wd model vehicle that is not a factory cab and chassis design. The 34 inch measurement is taken from the outside of the frame to the outside of the frame.…

view full answer...

Answer 6

I went to Curt's website to confirm. The Curt Front Mount Trailer Hitch Receiver item #31042 will fit the 1990 Chevrolet C/K Series Pickups. This part fits a wide range of GM vehicles spanning over 10 years. The tech tip you saw was put on our…

view full answer...

Answer 7

There are too many variables to determine if this Curt #31042 hitch might work with your Iron 22-515-88 base bumper with bull bar, and your suspension upgrades. This hitch is designed to work with the stock bumper and come out just below the bumper.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

view full answer...

Answer 10

I was able to get a dimension sheet from my contact at Curt for the Curt Hitch part #C15800 that you referenced. See attached pic. I also attached a set of the installation instructions for this hitch.

view full answer...

Answer 11

34 inch frame hitch fits are for the cab and chassis model trucks. The part #C15312 does not fit cab and chassis model trucks so it would not be a fit for a 34 inch frame. The part #C15800 is an example of a Curt hitch that does fit a 34 inch wide…

view full answer...

Recommended Trailer Hitch Compatible 2007 GM with 34 Inch Frame Chassis

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching