Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Great for marine applications; the stainless steel construction provides the best in corrosion resistance. The design makes Bearing Buddy an easy way to protect your bearings by keeping water out and ensuring enough grease is in the hub.
Features:
Specs:
Replace your existing grease cap with a Bearing Buddy to ensure a safe, easy way to monitor and control the level of grease in your axle hub. To adjust the amount of grease in the hub, use a grease gun to add more through the appropriate fitting. Adding grease moves the Bearing Buddy spring-loaded piston outward 1/8".
The O-ring inside the barrel of the Bearing Buddy maintains a seal from the outside. The interior of the Bearing Buddy is pressurized, preventing water from entering the barrel and diluting the grease.
An automatic pressure-relief feature is built into the Bearing Buddy. When the device is full, grease will seep around the edges of the piston and into the barrel. This prevents overfilling that can damage the inner seal.
You can manually check the grease level in your Bearing Buddy by pressing on the edge of the piston. If you can rock or move the piston, the hub is properly filled.
Average Customer Rating: 4.4 out of 5 stars (27 Customer Reviews)
Great for marine applications; the stainless steel construction provides the best in corrosion resistance. The design makes Bearing Buddy an easy way to protect your bearings by keeping water out and ensuring enough grease is in the hub.I stayed on hold for a total 2.5 hours on two different days to talk to someone for help
No luck
Rolled the dice and bought product
Hit it right
These caps worked as a direct thread in cap to swap my Oil Bath bearing system to a greased bearings on my Tennessee boat trailer. I have had them installed for over a Year now and would recommend them to anyone needing to upgrade their trailer to something more reliable. Only reason for 4 stars instead of 5 is that they didn't thread into my hub as far as I thought they should but they haven't moved or backed out since installation.
Fit perfect
They work as advertised. Keeps the grease up in the bearing and hubs.
Products are all very high quality and easy to install
Peter J.
10/7/2023
Not so well, because of the bearing buddy the hub was over packed with grease the seal blew, the bearings froze and the wheel sheared off the cotter pin and cam off while towing. Now I have to replace the entire axle due to the damage.$1900. I am removing the bearing buddies and looking for a better solution.
Mike L.
10/23/2023
These also replace turbo lube 48399 covers, I put them on my 2009 z520 ranger, took all of 15 minutes to change out, perfect fit, easy installation , feel much better having these vs oil bath, highly recommend. Great buy, very happy!!
Bearing buddy is still on the trailer and the wheel is still turning.
The item that I received was not what I ordered but with a phone call the problem was resolved promptly. Thanks!
These bearing buddy's are the perfect replacement for my turbo lube dust caps which they no longer make. I swapped from an oil bath to a grease lube system on my boat trailer and couldn't be happier. Thanks for your great service!
Great product and service. Questions answer very quickly. Able to get item that fit right on my trailer
and delivered on time.
If you own a trailer, this a must have! Don't ever risk repairing burnt out bearings along side the road with traffic whizzing by at 70mph, It only happened to me once!
Did not fit threads on hubs. The threads on the hub were cast and poorly at that. So I never could get them to fit. Other than that I think they would have worked great.
Scott C.
3/17/2022
they dont fit never used still in box
Didn’t fit as advertised.
David B.
8/30/2022
Hey Allen, can you tell me the hub bore you are trying to fit? This unit fits 2.441 hub bore. Make sure you measure with a micrometer.
ONLY PLACE THAT HAD THEM IN STOCK, GREAT DESCRIPTION ON HOW THEY REPLACED THE RANGER COOL HUB CAPS WITH SIZE DEMINSIONS
Worked perfect!!!! Wish I would've made the change to the Buddy Bearing Model BB2441T-SS years ago.
THANKS
worked as intended. Fast shipping.
Thanks for the fast shipping
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Stephen
3/22/2024
Great