Bearing Buddy Bearing Protectors Needed for a 1965 Shasta Trailer
Question:
I have a 1965 Shasta Trailer that is missing a grease cap. I can see that it is threaded. Would the Bearing Buddies work and what size would I need. Thanks so much in advance for your help.
asked by: Kelly D
Expert Reply:
The Bearing Buddies, # BB2047, are pressed into the hub for a tight fit. To determine the correct part for your trailer hub you will need to measure the diameter of the grease cap mating surface in the hub and match that as closely as possible to the measurements provided on the bearing buddy product pages, see link.
If your grease caps are threaded, the Bearing Buddies, # BB1980T-SS, # BB2441T-SS or # BB2080T-SS, may be the correct size for your hubs, measuring to determine the correct part is required. The most common size is the # BB1980T-SS.
Another possibility is that your hubs are oil bath hubs, if this is the case an oil cap will be needed, see link.
When measuring, a dial caliper is needed to get an accurate measurement. If none of the bearing protectors we carry match your trailer hubs, you will most likely need to contact Shasta for an OEM replacement part.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 1980T-SS - Threaded - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Bearing Buddy Bearing Protectors - Model 2080T-SS - Threaded - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.080 Inch
- Bearing Buddy
more information >
Bearing Buddy Bearing Protectors - Model 2441T-SS - Threaded - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.321 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2047 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.047 Inch
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Grease Caps for 2.04 Inch Diameter Hub Bore on Trailer
- Q&A: Dust Cover/Cap Solution for Harbor Freight Trailer
- Article: Mastering Tire Maintenance: Does Tire Pressure REALLY Matter?
- Q&A: What Size Bearing Buddies Will Fit a Harbor Freight Trailer 94564
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Proper Position of Equalizer and Shackles on Trailer Suspension
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Q&A: Flat Towing a 2015 Ford Explorer 4WD With Adaptive Cruise Control Behind a Motorhome
- Article: How to Measure a Trailer Axle
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: Trailer Wiring Diagrams