Is there a Trailer oil Bath Hub Oil Cap for a Dexter 6,000 Pound Axle
Question:
Will this cap fit the Dexter 6000 lb. axle? Dust cover is 2.44
asked by: Bob
Expert Reply:
The 21-36 oil cap, # RG04-270, fits 9K (after 10/1989) and 10K GD (2 piece drum), and 10K to 15K Dexter axles.
The 21-35, # RG04-230, fits 6K to 8K ( and 9K before 10/1989) Dexter axles. It would be too large with its 2-7/8 inch thread diameter. All of these oil caps are for oil bath hubs. If you are replacing a dust cap, you probably have regular hubs.
For bearing protectors measuring 2.441 inches, go with the stainless steel bearing Buddies, # BB2441SS, or, if the hub is threaded, # BB2441T-SS.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 2441SS - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.441 Inch
- Bearing Buddy
more information >
Bearing Buddy Bearing Protectors - Model 2441T-SS - Threaded - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.321 Inch
- Bearing Buddy
more information >
Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles and DeeMaxx 8K Oil Bath Idler Hubs
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 2.875 Inch O.D.
- Redline
more information >
Product Page this Question was Asked From
Replacement Oil Cap Kit for 9,000-lb to 15,000-lb Dexter Axle
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 3.984 Inch O.D.
- Redline
more information >
Continue Researching
- Q&A: How To Install the Spindle Nut on a 12,000 Pound Dexter Axle
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What Diameter Holes are Required For The LED Trailer Mini Clearance Lights MCL10AKB & MCL11RKB?
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Replacement Disc Brake Caliper for a Tie Down Engineering 46304 Caliper
- Q&A: What Replacement Disc Brakes do I Need for My TDE46890 System?
- Article: Stability Control for Heavy Duty Vehicles
- Q&A: Torque Rating for Spindle Nut on Trailer Hubs
- Q&A: Is there a Replacement for Dexter Nev-R-Lube Hub 008-386-80
- Q&A: Can EZ Lube Hub be Replaced with Dexter Nev-R-Lube Hub without Replacing Axle
- Article: Trailer Maintenance Schedule
- Article: Best Bike Racks for Electric Bikes