Incandescent Trailer Fender Light w/ Reflector - 2 Bulbs - Red and Amber Lens - Passenger Side
(304 reviews)
Price: $20.92
In Stock
Incandescent Trailer Fender Light w/ Reflector - 2 Bulbs - Red and Amber Lens - Passenger Side
Item # BA44FNR
Our Price: $20.92
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (304)
- Q & A (0)
- Photos
Optronics Trailer Lights - BA44FNR
- Clearance Lights
- Rectangle
- Incandescent Light
- Red and Amber
- 8-1/2L x 3-1/4W Inch
- Surface Mount
- Rear Clearance
- Submersible Lights
- Optronics
8-1/4" x 3-1/4". Incandescent marker light mounts on your trailer fender. Built-in reflex reflector. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. Pre-wired design. (2) 194 bulbs.
Features:
- Dual-face incandescent trailer light installs on your trailer fender
- Amber light faces the front of trailer
- Red light faces the rear of trailer
- Built-in reflex reflector removes the need for a separate reflector
- Incandescent bulbs can be easily replaced
- Druable polycarbonate housing and lens
- Red and amber lens over incandescent bulbs
- Compatible with 12V DC systems
- Surface mount with included mounting bracket
- Pre-wired design includes female barrel and grounding eyelet
- DOT complaint
- P2 rated
Specs:
- Configuration: passenger side
- Driver side: BA44FNL - sold separately
- Dimensions: 8-1/2" long x 3-1/4" wide
- Distance between mounting holes (center on center): 1-1/2"
- Bulb type: 194
- Number of bulbs: 2
- Power draw at 12.8V: 0.4 amps
- 3-Year warranty
P2-Rated Lights
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
BA44FNR Optronics Incandescent Trailer Fender Light w/ Reflector - 2 Bulbs - Red and Amber Lens - Passenger Side - Right Side
Alternate part number: BA-44FNR
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Incandescent Trailer Fender Light w/ Reflector - 2 Bulbs - Red and Amber Lens - Passenger Side - BA44FNR
Average Customer Rating: 4.9 out of 5 stars (304 Customer Reviews)
8-1/4" x 3-1/4". Incandescent marker light mounts on your trailer fender. Built-in reflex reflector. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. Pre-wired design. (2) 194 bulbs.by: Jacques03/03/2024
Good replacement
by: Noel 04/05/2024
This was the exact part I needed. Very grateful to find such a reasonably priced replacement.
by: Phillip Johnson05/16/2024
I installed the new fender lights and they work great.
by: Christopher06/25/2019
I have a 2010 international trailer. I was unable to find exact match parts so I went to etrailer to find comparable parts. My previous lights sat in the middle of the fender. These sit on the edge so you get a true picture of your edges at night.
by: Mike04/05/2023
Replaced the trailer fender signal light. Easy install on fenders.
by: Bill 09/05/2023
Great product and replacement
by: Douglas 11/22/2023
Great and sturdy!
by: Robert10/23/2018
The parts were a perfect match for the old ones on my trailer as rocks and age took it's toll. I would buy again as shipping was fast, parts were right and had no hassles. I bought 2 tail lights and 2 fender marker lights. Thanks for the great job guys! I will buy from you again as needed.
by: Kelly 07/26/2023
Everything I expected! shipped quick, received quickly, install took minutes. Definitely will order from them in the future!
by: John 08/20/2018
A well made product and easy to install with a few self tapping screws. Having the 2 ground wires pre-wired to a common ring lug made the installation that much easier.
John
8/30/2019
Just great. No issues.
by: Thomas12/15/2018
I needed a new fender and running light for my Wells Cargo cargo trailer after I had a tire blowout that ripped by right side fender off. The fender was basically a direct replacement. The running light was slightly different but installation was fairly simple. Shipping was super quick and the price was reasonable. I have never had a bad experience when dealing with the folks at etrailer. I highly recommend them and their services. Thanks.
by: Darrell M08/06/2014
great service, great selection and fair prices... only way I could be happier is to have found etrailer.com 5 years ago.
D
Darrell M.
8/7/2015
Worked great, great service a great find
by: Wayne A.10/05/2017
Driving to Alaska this summer I lost the tread on my 6'x12' cargo trailer in Canada destroying my drivers side trailer fender. etrailer sent a replacement up to me in Chugiak, Alaska that I installed for the drive back to Florida. The AlCAN Highway can be pretty tough on vehicles still today. I also needed to replace both trailer fender marker lights upon my return and had etrailer send me the exact ones I had lost on the trip. Almost 10,000 mile journey. Great prices, great service and fast /reasonably priced shipping. Extremely satisfied with etrailer in every way.
by: Dan M07/15/2014
This was a universal fit for both right and left fenders if you change the lights around. I choose to remove the lights in the housing and install my upgraded LED lights that I had on the trailer. The part matches the older broken one perfect.
by: Dan M07/15/2014
This was a universal fit for both right and left fenders if you change the lights around. I choose to remove the lights in the housing and install my upgraded LED lights that I had on the trailer. The part matches the older broken one perfect.
by: Jeffery08/06/2018
Our local repair and parts store could not find the proper lights for my trailer from their online connections. I was confused after spending ten minutes looking on the web to find etrailer might have the lights I needed, because, other sites displayed the part, but actually were out of stock and no longer were continuing the item. Admittedly, I ordered with little faith and waited for an email telling me the part was discontinued. However, to my surprise, the part arrived on time as promised exactly as I needed. Needless to say I am VERY pleased with etrailer. For giggles, I intend sending a link to my local store for the obvious.
by: Malachy10/03/2018
etrailer.com is a Superb Website to purchase good Trailer Parts.
I received Very Professional Service - coupled with quick shipping.
What more could I ask for?
by: Icemaned07/13/2015
Great prod. Good company to deal with. If I need any other parts related to a trailer I will look to them first. Thanks
Icemaned
7/12/2016
Light_ Price_ shipment_ all bright and working great
by: Jared L.12/02/2016
Excellent product, quality, appeal, however, the plastic piece that protrudes out to cover the wires is about a 1/2" to short;it was not long enough for the lights to screw back into the right holes and cover up wire hole in fender. I used clear silicone to cover the part of the wire that was left uncovered.
by: Jim06/15/2016
I needed some fender lights and these guys fit perfect, quick delivery as well. The lights were easy to install, just plug them in, everything fit just like they were supposed to. Could not be happier with the item, sales staff, and service.
by: Craig F09/17/2012
First class quality construction better than the original equipment on my trailer. These lights were a direct replacement, no new mounting holes required. I couldn' t be more pleased with the product or the service. I'll be using etrailer.com for all my trailer needs in the future.
by: Lauren03/16/2017
Exact match for the old light. Works great. Simple installation.
Lauren
3/18/2018
A year after I purchased and installed this light and it is still working. That in itself may not be a big revolution, but the fact that this trailer sits out with this light in the direct sun all day every day and there is no sigh of UV degradation in the plastic. This unit is highly recommended
25
304
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Amber and Red LED Clearance Light Recommendation for a Trailer FenderThe closest thing we offer to the # BA44FNL and the # BA44FNR in LED is the part # MCL12ARRB and the # MCL12ARLB. I attached an install and review video for these lights for you to check out as well.
view full answer... - Recommended Clearance Light For Enclosed Trailer FendersWe have the following options that are intended to be clearance lights but could be wired to be used as turn signals: LED Clearance Light Assembly for Trailer Fender - Trailers over 80" Wide - Driver Side # MCL12ARLB and passenger side # MCL12ARRB. Left Fender Clearance Trailer Light, Prewired - Amber and Red # BA44FNL and right # BA44FNR. LED Trailer Fender Clearance Light - Submersible - 2 Diodes - Amber/Red - Driver or Passenger Side # MCL180ARB. You can wire these for turn signals...
view full answer... - Dimensions Of Optronics Fender Trailer Clearance Light Assembles For Trailers Over 80 Inches WideI pulled the 2 trailer lights you asked about so that I could take some measurements you wanted. I have attached a couple of photos with the dimensions noted on the photo. Part # BA65ARRB measures 5-7/16 inches long and 3-3/16 inches wide, and is used for the right side of the trailer. For the left side you would need part # BA65ARLB. The # BA44FNL measures 3-1/16 inches wide and 4-13/16 inches long without the mounting hole flange, and 5-3/8 inches long when measuring with the mounting...
view full answer...
- Removing Lenses of Optronics Fender Light and Replacing Bulbs with LEDsThe lens of # BA44FNR and # BA44FNL should pop off if you take a small flat head screw driver and pry it off. Unfortunately, we don't have any videos or instructions that show the removal. For replacement LED bulbs you can use # P340194A-360.
view full answer... - Adding Lights to CE Smith FendersThere aren't fenders available that have cutouts for side marker lights, but there is a way to add lights to the CE Smith Single Axle Trailer Fenders with Top and Side Steps # CE19502-2. You could very carefully cut the fenders because they are plastic, or you can mount lights on top with the Trailer Fender Light with Reflector - Driver Side # BA44FNL and Passenger Side # BA44FNR. I have added links to video reviews for you to check out as well.
view full answer... - Replacement Shorelander Trailer Fender and Light Kit RecommendationThe Fulton Single Axle Trailer Fender part # F008583 should fit your Shorelandr trailer, but it does not come with lights. For the Fulton plastic fenders we recommend the Left Fender Clearance Trailer Light # BA44FNL and the Right Fender Clearance Trailer Light # BA44FNR.
view full answer... - Trailer Fender with Lights RecommendationYou could likely cut out light holes on fender # F008575 if you wanted to. Using a rotary tool would make it quick and easy. Or you could mount left fender light # BA44FNL and right fender light # BA44FNR on the fenders. Fenders with pre-cut light holes are not available from us.
view full answer...
- Fulton Plastic Fender # F00584 and Fender Light Recommendation for Right and Left Side of TrailerThese Fulton Plastic Fender with Top Step - Black - 14 inch Tires, part # F00854, can be used on the left or right side of the trailer. That is why there is not a left or right side fender you can pick from on our site. You would need to order 2 of them if you need fenders for both sides of your trailer. These fenders do not come with lights pre-installed on them. You would need a Right Fender Clearance Trailer Light, Prewired - Amber and Red, part # BA44FNR, and a Left Fender Clearance...
view full answer... - Replacement Red/Amber Fender-Mount Tail Light for Aluma Motorcycle TrailerWe do offer all sorts of trailer lighting, including fender-mount types such as # BA44FNL and # BA44FNR which are combination red/amber lights. We also have # MCL61ARB. These and all other red/amber lights are shown on the linked page. If you cannot find the correct item by reviewing the page please feel free to send us a photo or two of your trailer and lights and we can try to match it.
view full answer... - Marker Light Recommendations for Fulton Plastic FendersFor the Fulton plastic fenders we recommend the Left Fender Clearance Trailer Light # BA44FNL and the Right Fender Clearance Trailer Light # BA44FNR.
view full answer... - Can Lenses on Left Fender Clearance Trailer Light # BA44FNL be Switched to Use on Right Side Yes, you can swap the lenses on the Left Fender Clearance Trailer Light # BA44FNL, although we do have the Right Fender Trailer Light # BA44FNR as well. I have attached review and installation videos for you to check out.
view full answer... - Trailer Fender with Lights for Trailer with 14 Inch WheelsWe have a lot of fenders that will fit 14 inch wheels, see link. Even though they do not come with lights you can add lights to them. For example take a look at these fender lights with both red and amber lights: # MCL12ARLB and # MCL12ARRB # BA44FNR and # BA44FNL # DG52444VP and # DG52443VP
view full answer... - Fender Light Kit that Has Amber and Red Lights On Top of FenderWe do have fender light kits that are very similar to the ones you sent in a picture of. For the left hand side we have the part # BA44FNL and for the right side we have the part # BA44FNR which would work well for you.
view full answer...
- Replacing Shorelander Fenders with Marker LightsThe brackets we recommend for the plastic fenders are the # CE26098G-2. Don't worry, drilling a hole into the fender for the bracket to mount to your trailer will not hurt the structural integrity of the Fulton Fenders # F008584-2 you were looking at. If you are also in need of an inexpensive marker light, I recommend the Optronics Prewired Fender Ligth # BA44FNR for the right side and the # BA44FNL for the left side.
view full answer... - Recommended Mounting Hardware For Trailer LightsI recommend using self tapping screws to install the Oblong Trailer Clearance, Side Marker Light, 1 Wire - Amber # MC68AB, the Right Fender Clearance Trailer Light, Prewired - Amber and Red # BA44FNR or # BA44FNL, and the Trailer License Plate Light with Housing and Mounting Bracket - Clear Lens - Black Base # LP81BB. For these installations you can use Self-Tapping Screw - 1/4" -14 x 3/4" Long - Zinc # FA1131822, which is corrosion resistant and has a hex-washer-head less likely to strip.
view full answer... - White Plastic Fender Recommendation for a Shorelandr TrailerThe Fulton Single Axle Trailer Fender part # F008573 should fit your Shorelandr trailer, but it does not come with lights. For the Fulton plastic fenders we recommend the Left Fender Clearance Trailer Light # BA44FNL and the Right Fender Clearance Trailer Light # BA44FNR.
view full answer... - Replacement Optronics Fender-Mount Red/Amber Tail/Clearance Light for Charmac Cargo TrailerI reviewed quite a few photos of various Charmac cargo trailers and while I found some with external fenders I did not find any shown with lights installed. However, we do offer a lot of combination red/amber trailer lights and all are shown on the page I linked for you. Among these are fender-mount lights # MCL67ARB, # MCL12ARLB, # BA44FNR and # BA44FNL. There are others too on the linked page. If none of these is a correct replacement you can submit a photo .
view full answer... - Plastic Fender And Lights Recommendation For Tow DollyWe do offer plastic fenders that may work for your tow dolly but the fenders do not come with lights pre-installed on them. The fenders we offer are for single axle trailers and we have a couple of sizes available. They will fit for both the left and right side of the trailer. For 8 to 12 inch wheels I recommend part # F008541. These have a top step, and have a 300 lb weight capacity. For 13 inch tires I recommend part # F008543. Since these do not come with lights pre-installed you...
view full answer... - Can Wire Cover for Right Fender Clearance Trailer Light be Trimmed to Fit a FenderThe little tail piece that sticks out is meant to cover and protect the wiring of light # BA44FNR and is therefore not structurally necessary for mounting the light. So you could trim it down as needed. I have linked a video review of the light for you. The matching left fender light is # BA44FNL. I have included a picture that shows the over 80 inch requirements for trailers for you. You will need rear clearance lamps, rear identification lamps, and front clearance lamps. The location...
view full answer...
- Can Holes be Cut for Lights in Fulton Plastic Trailer FendersYou could likely cut out light holes on fender # F008575 if you wanted to. Using a rotary tool would make it quick and easy. Or you could mount left fender light # BA44FNL and right fender light # BA44FNR on the fenders. Fenders with pre-cut light holes are not available.
view full answer... - Fender Compatible With 13 Inch Wheels On Shorelander Trailer Carrying 18 Foot SEA-ARC BoatI have provided a link of the fenders that will work with your existing trailer and a 13 inch tire size. Several of these fenders provide areas that are intended to mount lights but none have lights that are included with the fenders. For your trailer I recommend the Fulton Single Axle Trailer Fender with Top and Side Steps, this comes in 3 colors white # F008573, silver # F008593, and black # F008583. The dimensions of this fender are 9 inches wide by 40 inches long by 12 inches tall....
view full answer... - Availability of Amber and Red LED Clearance Light for Trailer FenderThe closest lights we offer to the # BA44FNL and the # BA44FNR in LED is part # MCL12ARRB and # MCL12ARLB. I attached an install and review video for these lights for you to check out as well.
view full answer... - Replacement Red and Amber Clearance Light Recommendation for Top of Trailer FenderThank you for reaching out and providing a photo! To install that same style of light on the CE Smith Single Axle Trailer Fender # CE17900G I recommend checking out the Incandescent Trailer Fender Light w/ Reflector which comes as part # BA44FNL for the driver side and part # BA44FNR for the passenger side. This is a similar style and also gives you the red and amber lights you're looking for. If you'd like to look at some other style we have I'm linking our selection of this style of...
view full answer...
- Will Fender Clearance Trailer Lights Work as Turn Signals?You can use the pre-wired Fender Clearance Trailer Light # BA44FNL (left) and # BA44FNR (right) as turn signals. They come with a ground wire and power wire so you would just need to wire them to your turn signal power wires to give your fenders the turn signals you want. I've added a link to a help article on trailer wiring for you to take a look at as well.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Installed by:
Joe V
Installed by:
Cole B
Installed by:
Randy B
Video by:
Andrew K
Video by:
Zach D
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Joshua S
Video Edited:
Dustin K
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Robert
10/24/2019
Still in great shape with no problems!