Optronics Thinline LED Trailer Fender Light - Submersible - 2 Diodes - Red/Amber Lens
(817 reviews)
Price: $6.94
In Stock
Optronics Thinline LED Trailer Fender Light - Submersible - 2 Diodes - Red/Amber Lens
Item # MCL61ARB
Retail:$9.54
Our Price: $6.94
You Save: 27%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (817)
- Q & A (0)
- Photos
Optronics Trailer Lights - MCL61ARB
- Clearance Lights
- Rectangle
- LED Light
- Red and Amber
- 4L x 1W Inch
- Surface Mount
- Rear Clearance
- Side Marker
- Submersible Lights
- Optronics
3-7/8" x 1-1/4" Rectangle. Waterproof, 2-LED trailer marker light mounts on your trailer fender. Amber light faces front, and red light faces rear. Surface mount with bracket (sold separately). Accepts 1-prong or 2-prong plug. P2 rated.
Features:
- Dual-face LED trailer light installs on your trailer fender
- Amber light faces front of trailer
- Red light faces rear of trailer
- Thinline Series has a low profile so that light can fit in tight spaces
- Sonically sealed, waterproof unit is submersible
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate housing and lens
- Red and amber lens over white LEDs
- Compatible with 12V DC electrical systems
- Surface mount with bracket (A65B - sold separately)
- Accepts industry standard 1-prong plug (A65P - sold separately)
- P2 rated
Specs:
- Dimensions: 3-7/8" long x 1-1/4" wide x 7/8" thick
- Distance between mounting holes (center on center): 3"
- Diodes: 2
- Power draw at 12.8V: 0.048 amps
- Lifetime warranty on LEDs
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
P2-Rated Lights
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
MCL61ARB Optronics Thinline LED Dual Face Trailer Fender Light - Submersible - 2 Diodes - Red/Amber Lens - P2 Rated
California residents: click here
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Optronics Thinline LED Trailer Fender Light - Submersible - 2 Diodes - Red/Amber Lens - MCL61ARB
Average Customer Rating: 4.9 out of 5 stars (817 Customer Reviews)
3-7/8" x 1-1/4" Rectangle. Waterproof, 2-LED trailer marker light mounts on your trailer fender. Amber light faces front, and red light faces rear. Surface mount with bracket (sold separately). Accepts 1-prong or 2-prong plug. P2 rated.by: John08/20/2022
These fender lights are perfect replacement for my Aluma trailer! I had a cracked one so I bought two so they’re both new awesome product. Trailer always has the perfect parts or replacements I need for my numerous trailers. Thanks!
by: Jonathon02/13/2024
Great communication. Competitive price and fast delivery. Will but again
by: Jim C07/24/2019
This led light is superior to any I have seen. The new lights made my 20 year old horse trailer look like new going down the road. Being visible is important to us and our livestock.
by: Scott 02/03/2024
Just like the original
by: Jim01/16/2024
spares to inventory. None used yet.
by: Joann 12/28/2021
It is an exact match to the fender running lights I currently have on my horse trailer. This was the only site that I was able to find them.
by: Al08/22/2023
plug and play.
by: Bob 07/11/2022
The part is what I was looking for! Thank you.
Bob
7/12/2023
The product is working great!
by: Douglas07/22/2020
Really like these lights but by choice I have them where they take a beating sometimes. Even though I have to replace them on occasions it’s worth it to me. Actually they are really rugged, I’m extremely happy with them. Etrailer is my go to place for any trailer part!
by: Bryan08/28/2023
The shipping was awful. Looked like a kid threw the stuff in a box with no packaging and shook it up. We'll be lucky if they all work.
by: Dale 03/31/2023
Product is as advertised. Order process was simple and processing was as promised. I highly recommend etrailer.com
by: Jerome06/04/2019
Trying to swap out my trailer lights to LED, so the draw on the battery is minimal. There are so many variations on the solid color, I had to measure and keep measuring. The solids have 10 Led’s But no such luck is it’s the fender lights that are both amber and red. I guess one company can’t do it all.
It would be great to include the mounting plates, especially at this price. And also to sell multi packs of two or three. I only need two amber and two fender dual color, but need seven red.
Shipping was sort of slow compared to today’s shipping speeds. Back in the day it would have been speedy. Times they are a changing. Packaging was weak. Each light has a plastic bag, but maybe only two were still in the bag. Maybe some sort of sealed plastic bag would have been smart.
I’m guessing these will work fine. I thought we had to be careful of the Positive and Neutral leads for LED lights because we can damage them if they go on backwards. I guess we shall find out.
Thanks etrailer for actually having this product with such extensive documentation and videos. Other websites ain’t got nothin on you.
Rachael H.
6/6/2019
We do have several light bracket options linked at the bottom of each product page for each light. There are different configurations, and colors to suite your specific needs. At this time we do not offer these lights in a multi-pack configuration.
by: Nate T04/23/2020
Perfect retro fit for the old incandescent bulbs. Snaps right into place using the old mounting hardware. No problems with the new LED's. Always work and very bright.
Nate T.
4/24/2021
No issues. Still works great after multiple launches and being completely submerged in water.
by: Joe 09/26/2022
Works exactly as I wanted! Converted entire trailer to LED
by: Melvin W05/07/2020
We have a 7x14 low rider trailer and replaced all lights and marker lights with LED lights. The figment was perfect and they look much better than original lights.
by: John 10/14/2022
The light was a perfect fit and is still working one year later. Thanks E-Trailer.
by: WillyD10/14/2022
The fender lights came sooner than expected and they fit perfectly. Couldn't ask for any better service.
by: Steve 12/21/2020
Outstanding service and great replacement light! Works great! Thank You for the lights and other products that I purchased from you! My go to company for all my trailering needs!
by: Doug M.04/28/2017
Trailer side marker amber/red .... 2 prong plug in .....
Exact replacement for my trailer..... fit perfectly. Shipped on time and quickly.
by: Jerry from MN10/10/2017
These lights are high quality products and they are also hard to find from other suppliers! I recommend them for your fender mount lighting needs.
by: Vern M11/01/2018
Had a heck of a time finding a replacement marker light for my new trailer! (Lost it in Chicago?) Fortunately found the exact replacement at etrailer! Way to go etrailer!
by: Shawn05/28/2017
The lights worked out perfectly. Still bright as ever! Thanks etrailer for a great product & fast shipping.
by: Dusty10/19/2016
Exactly as advertised. Fit like a glove and works like a charm. That's all you can ask from a trailer light.
by: Robert 08/25/2022
Exact replacement for the original ligh ts.
by: Mike12/08/2016
It is an exact replacement for my trailer. I was glad to see that the light does not have the etrailer stamp on it like is shown in your pictures. I couldn't find this light anywhere locally. I was glad to find it on your website. Thanks!
25
814
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Replacement Rectangular LED Light Combination Amber/Red I have a couple options for you that are going to be a close match to the Peterson Piranha LED Clearance Light # M161R . # MCL65ARB is 3-15/16" long and a 10 diode LED light that is amber on the left and red on the right. This is a surface mount light and does not come with a mounting bracket. # MCL67ARB is the same light that comes with a mounting bracket included. If you were looking for a 2 diode light you can use # MCL61ARB which does not come with a mounting bracket. If you're looking...
view full answer... - Recommended Replacement for Optronics MCL61ARBI have some good news, we carry the Optronics Thinline LED Trailer Fender Light - Submersible - 2 Diodes - Red/Amber Lens # MCL61ARB. This should be the exact same light you have so it is the perfect replacement.
view full answer... - Replacement Red/Amber Fender-Mount Tail Light for Aluma Motorcycle TrailerWe do offer all sorts of trailer lighting, including fender-mount types such as # BA44FNL and # BA44FNR which are combination red/amber lights. We also have # MCL61ARB. These and all other red/amber lights are shown on the linked page. If you cannot find the correct item by reviewing the page please feel free to send us a photo or two of your trailer and lights and we can try to match it.
view full answer... - Does it Matter Which Pin on Thin Line Sealed LED Fender Mount Trailer Clearance is Ground or PowerThere are some lights that are not polarity sensitive such as # MCL61ARB. So it will not matter which way you place it in base # A65PB. The light will ground through the mounting hardware and the wire connects to the running light circuit on the trailer.
view full answer... - Which Mounting Bracket for Optronics MCL61ARB LightI have a solution for you, but the # MCL61ARB does not fit in the # A67BB bracket. The # MCL61ARB light that you're using requires the # A65B bracket for mounting. You may also need the Single Wire Plug for Thin Line Series Trailer Clearance and Side Marker Lights # A65P since this light grounds through the mounting hardware (if you have a single wire light).
view full answer... - Comparable Replacement Parts for a Carry-On 2,9990lb TrailerGood news! I was able to look up your Carry-On Cargo Trailer and found the items you mentioned and similar products you are looking for. The Fender Clearance Light Bracket # A67BB with the LED red and amber light # MCL61ARB or the incandescent # MC65ARB will mount into this bracket and work great as a replacement for your trailer. I was unable to locate the # 11 Roof Vent Dome you referenced. Most likely we have what you are looking for but you will need to first determine what vent...
view full answer... - Replacement Trailer Clearance Light for a Kll 1A-V-1260ABI looked up the trailer light you listed and the exact replacement that we carry would be the part # MC65ARB. This light uses the part # A65PB as a mount so the part # MCL61ARB should work as a replacement for you as well.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Written by:
DeAnne T
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Updated by:
Adele M
Updated by:
Amy B
Updated by:
Wilson B
Updated by:
Brian T
Video by:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joann
12/29/2022
Still working perfectly!