Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
(79 reviews)
Price: $129.32
In Stock
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
Item # 84556UC3
Retail:$137.52
Our Price: $129.32
You Save: $8.20
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (79)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - 84556UC3
- 5 on 5 Inch
- For 3500 lbs Axles
- Hub with Integrated Drum
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Standard
- L44649
- L68149
- Dexter
This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. Compatible with electric and hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Sturdy iron construction
- Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
- Hub and drum are made in the USA
Specs:
- Application: 3,500-lb trailer axles with #84 spindles
- Wheel size: 13" to 15"
- Drum dimensions: 10" diameter x 2-1/4" wide
- Works with 10" brake assembly
- Bolt pattern: 5 on 5"
- Grease cap flange diameter: 1.98"
- Wheel bolt diameter: 1/2"
- Weight capacity: 1,750 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
K08-249-91 Dexter 10" Trailer Hub and Drum Assembly for 3.5K Axle with Hardware - 5 on 5
Replaces 84556UC3 and 84556-KIT
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Alternate product found
Customer Reviews
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5 - 84556UC3
Average Customer Rating: 4.8 out of 5 stars (79 Customer Reviews)
This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. Compatible with electric and hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.by: Richard10/20/2023
Packing sucks. Boxes were torn open and taped up. Bearings and other parts bent scratched and for the 500 plus Dollars i spent would have been nice to get something other than china made bearings. Hubs and drums look ok just banged up some.
by: James W05/25/2021
I originally received drums with incorrect bolt circles due to box contents not matching their labels. etrailer provided a shipping label for their return and had the correct drums on the way even before receiving the incorrect ones back. All bearings, races and grease seals were included in sealed packs, as well as detailed instructions. After packing the bearings with grease, as well as the hubs, final installation was simple.
James W.
5/26/2022
The final result worked quite well. After learning the cause of the self-adjusting brakes overtightening from a different source but the etrailer staff should have recognized the issue I loaded my 2500 pound sports car on my trailer for a round trip of about 1500 miles and was very satisfied with the brake performance.
by: Robert O.07/13/2016
Purchased a 7,000 Lb. trailer, but new laws required a trailer with a weight rating to have axle brakes. With the help of etrailer; I found the right parts to add brakes to my trailer. All the parts fit perfect. Thank you.
by: Eder03/03/2024
Great service and excellent website
by: Michael 12/12/2023
factory OEM and exactly what i ordered
by: Gregory02/11/2018
I was very satisfied! Everything fit like it should and the trailer tows great. I will definitely order from etrailer again!
by: Harold 10/19/2023
Great help from figuring out what we needed in parts to ordering them.
by: Still going strong10/17/2017
I ordered new Brake Hubs and Brake backing plates. After a year and constant use, these are still holding strong. There is no substitute for 4-wheel braking on any dual axle trailer. I highly recommend upgrading any two wheel axle brakes to 4 wheel braking. They work! Thank you etrailer.
Still P.
10/17/2018
Still going strong- brakes still work perfect.
by: Dan11/01/2018
On a tandem axle trailer I add brakes to the non brake axle. This matched the other brake axle perfectly.
Dan
11/7/2019
The trailer stops as well now as the day they were installed.
by: Steve A09/05/2016
Perfect fit for my M101CDN2 military trailer converting to Jeep JK 5 on 5 bolt pattern. Only complaint is the imported bearings supplied with them. Will be adding Dexter electric brakes soon.
by: Brad B07/20/2017
Purchased new backing plates assemblies and drum assemblies 2 to replace worn out parts and 2 for installation on an axle that didn't have brakes on at all. Parts fit great and have been working flawlessly for a year. Great parts, prices, and shipping time.
Thanks,
Brad B.
by: Michael McGee08/01/2016
These kits bolted on with no modification. I replaced a hydraulic surge brake system with them. The brakes perform well and the auto adjusters make it easy to keep them well adjusted.
by: Bob R.07/19/2015
Good product, easy install. Make sure to measure bolt pattern to make sure you order correct drums. Customer support is excellent as well as the how to video's! I would highly recommend this product.
Bob R.
7/18/2016
Still working fine. Good product, excellent customer support!
by: Rick N.08/14/2015
Ordered a set of four hub and drum assemblies for my 15 year old Big Tex 70DM car hauler trailer. All merchandise arrived intact and within a reasonable time. Especially liked the convenient hand holes for easy carrying of the heavy cartons. Great hardware package. The remove and replace went without a hitch (pun!) and she's back on the road. I have ordered from etrailer before and will again when the need arises.
by: JC Cason10/16/2014
Had a mixup in hub numbers. Called Amanda at etrailer, and we worked it out very satisfactorily. New parts and refund were received promptly. If I need additional trailer parts, I will certainly use your company again. The new parts worked exactly as prescribed. Thanks, JC
by: William J. 03/30/2015
Very nice product. All the parts were included with the brake drums to make for an effortless installation. I've bought items from etrailer in the past and will buy from them in the future.
Good communication and quick shipping.
Prices are very reasonable.
by: Brian m11/26/2014
All the parts I ordered arrived in two business days and in good condition. Everything to add brakes to one axle fit perfectly and worked as it should.In less than two hours after my order,I got confirmation that it had shipped.Excellent outcome from placing the order to installing the parts.I will definitely do business with Etrailer again.
by: Derek M j04/11/2015
Breakers were great installed with ease. One comment though the dust/bearing caps were just a little bit to big to fit the drum I had to grind them down a little to get them on.
by: Fred08/10/2022
Dexter uses the made in USA with pride but the bearings are made in china
by: Tom S.08/27/2014
Could not have been more pleased with the order of new electric brakes and drums for my trailer. Easy ordering and fast delivery.
Everything fit as it should.
Thank you very much.
by: Donald S09/03/2014
I just added trailer brakes to my BBQ trailer. These brakes a worth the money. This was my first time to install trailer brakes it took me only about an hour for the complete installation. It could have been done faster if i was younger. GREAT ITEM
by: Glenn G12/17/2014
The drum and bearing/seal package fit like a dream and your prompt shipping to my field destination was amazing. Thank you for your service. I will definitely tell others about your company and services.
by: Brad D.09/24/2013
The hub/drum fit fine and seems to be of good quality.
The bearings are Chinese made and I wish the assembly included only USA made bearings-seals.
by: Alan S11/10/2014
This website made it no problem for me to figure out how to select the correct brakes for my trailer. Great prices and fast shipping!
by: Randy12/18/2017
Received parts as expected in good shape. The grease cap was a bit of an issue with the fit up. Needed a little more machining to the hub for the fit.
25
79
Show More Reviews
See what our Experts say about this Dexter Trailer Hubs and Drums
- Measuring Bolt Pattern On Drum AssemblyI went to our warehouse and pulled a couple of the Dexter Hub And Drum Assemblies, part # 84556UC3. I took measurements between the bolts on the drums and took a photo you can check out. The measurement I got was 2.997 as the photo shows on the digital caliper. The measurements varied approximately .001 inches which can be due to where I placed the caliper. If you would like to send me a photo of the drum you have showing the measurement I can possibly help further. I have attached...
view full answer...
- Replacement Hub and Drums for 2006 Big Tex LR with Dexter 3500 lb Axle and 5 on 5 inch Bolt PatternThanks for the pictures of your hubs and brake assemblies on your 2006 Big Tex 70LR. Based on that the exact match for a hub drum is the part # 84556UC3 and then for new brake assemblies that are self adjusting you would want the # AKEBRK-35-SA and you'd be set.
view full answer... - Trailer Hub/Drum Recommendation with 5 on 5 inch Bolt PatternYes, if you have a 3,500 lb trailer axle we have the hub/drum part # 84556UC3 that has a 5 on 5 inch bolt pattern like you mentioned wanting. For a set of brake assemblies that fit this hub we have the part # 23-468-469.
view full answer... - Does The Trailer Hub and Drum Assembly Come Assembled Greased and Ready to InstallThe Trailer Hub & Drum Assembly, part # 84556UC3, comes dry and not greased or assembled with bearings installed. The races are already installed, but you will need to grease the bearings and install them into the hub. The assembly does not come assembled and greased because dirt would be able to get into the bearings from the exposed open side and your bearings could be ruined. I have linked a video below that may be a good reference to take apart and assemble your new hub and drum assembly,...
view full answer... - etrailer and Dexter 5x5 10" Drum and Hub Assembly Stud Thread SizeBoth the Trailer Hub and Drum Assembly # AKHD-550-35-K and the Dexter Trailer Hub and Drum Assembly # 84556UC3 use 1/2" - 20 threads for the studs. Both kits include the appropriate lug nuts for the studs. Attached are review and installation videos that you can check out.
view full answer... - Timbren Axle Less System Recommendation for Off Road Trailer with 5 on 5 inch Bolt PatternWe don't have a ton of hubs with a 5 on 5 inch bolt pattern, but if you went with a 3,500 lb Timbren system like part # ASR3500S06 you could use the part # 84556UC3 for a hub/drum or part # 84550BX for just a hub. The # ASR3500S06 has a 4 inch lift built into it so it would be great for an offroad trailer.
view full answer... - What Is Stud Length On Dexter Trailer Hub and Drum Assembly # 84556UC3 I went to our warehouse and measured the studs on the Dexter Trailer Hub and Drum Assembly, part # 84556UC3 for you. The stud is 1-1/4 inches long on the hub. I have attached a photo of the hub with the measurement you can check out.
view full answer...
- How to Pick Out Replacement Rims for a Utility TrailerI can't safely recommend you use vehicle rims on a utility trailer. I would strongly recommend you replace what you have with rims and tires designed for trailer use. Especially since you are considering replacing them anyway. First thing you want to do is determine the bolt pattern of your current wheels, check out the help article I attached that details how to do this. Once you figure out what bolt pattern you have check out the other link I attached that will take you to a page that...
view full answer... - Replacement Hubs Needed for TrailStar Boat TrailerWe do have a way to help you with replacement hubs/bearings/seals but when I tried reaching out to the manufacturer of your boat trailer but they weren't able to tell me what bearings and seals are used for your hubs. What you will need to do is pull a hub off of your trailer to see the part numbers for the bearings and seal. Once you know that we can get you a replacement. If you can't find part numbers then the next best thing to do is use a digital caliper and measure your spindle where...
view full answer...
- How Far Does the Dexter Hub # 84556UC3 Center Bore Extend From the Mounting Face of Hub?I went out to the warehouse to measure the Trailer Hub and Drum Assembly - 3,500-lb Axles - 5 on 5 # 84556UC3 and the center bore will stick out 1-3/4 inches from the hub face and the dust cap will add 7/8 inch. These hubs will work well on the Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs # T3584F-EZ-8974. For your brake assemblies, I recommend the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA if...
view full answer...
- How To Find Replacement Bearing Kit For Trail Star Boat TrailerVin numbers cannot be used to identify wheel bearing/axle information, as they're is no database for that. The OEM trailer manufacturer's use whatever axle they have on hand that day, so it could have a few different options. Most boat trailers have 1 of 3 possible bearing combinations, but you'll need to measure your spindle to be sure. The first is a 1" straight spindle that uses bearings # L44643 and measures 1" at bearing points on the below diagram, and uses seal # 34823 which measures...
view full answer...
- Parts Needed to Add Electric Brakes to a Trailer without BrakesUnfortunately your pictures are not working, but you provided me with enough information that I can make a recommendation for you. There are a few different parts you will need to add brakes to your trailer that has a 3500 lb. Dexter Axle. Brake mounting flange (which your axle already has), Spindle which we know because you told me you had a 3,500 lb. Dexter axle, Brake assembly (listed below), Hub and Drum (listed below), Trailer wiring (listed below), Breakaway Kit (listed below) and...
view full answer... - 5 on 5 inch Hub Recommend for Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR2KHDS03Yes, we do carry an idler hub and and a hub and drum assembly with a 5 on 5 inch bolt pattern that will work on the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR2KHDS03. For an idler hub you would want the part # 84550BX and for a hub and drum you would want the part # 84556UC3.
view full answer... - Does 84556UC3 Come with 1 or 2 Hub and Drum Assemblies?The Dexter Trailer Hub and Drum Assembly # 84556UC3 is a single Hub and Drum assembly. We do not offer them sold in pairs, so you would need to purchase 2 individually if you're going to replace the parts on an entire axle. I've linked the installation video for this product to this answer. You could also go with the # AKHD-550-35-K , which is a more economical Hub and Drum assembly. If you also need a brake recommendation for your trailer, the # AKEBRK-35L and # AKEBRK-35R is a great...
view full answer... - Availability of Dexter Axle Brake Assemblies K23-026-00 and K23-027-00We do have the regular Dexter Axle brakes and their Nev-R-Adjust equivalents. The regular (manually adjusted) brakes that you are wanting are listed as part # 23-26 for the Left Hand side and part # 23-27 for the Right Hand side. Their Nev-R-Adjust equivalents are parts # 23-468 and # 23-469 respectively. The Dexter Axle hub and drum assemblies that we have for a 3,500 lb axle use the Inner Bearing # L68149 and Outer Bearing # L44649. If you have a 5 on 4-1/2" bolt pattern then you want...
view full answer... - What is Hub Bore Diameter of Dexter Hubs # 84556UC3 and # 84656UC3The outer diameter of the center bore of the Dexter Trailer Hub and Drum Assembly, # 84556UC3 and # 84656UC3 is 2.67 inches. Most wheels that would be used with this hub would have a pilot diameter of 3.19 inches.
view full answer... - Determining Which Replacement Braking Components For Eagle Tandem Axle Boat TrailerYou are correct that you can replace the older Dico 60 surge brake actuator on your Eagle tandem axle trailer, and for that I recommend the Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs # 099-175-00. For new brake lines I recommend going with the HydraStar Hydraulic Brake Line Kit - Tandem Axle - 15' Long, 3/16" Main Line # HS496-152 which is designed specifically for tandem axle trailers. Moving on to the replacement brakes, bearings, and possibly...
view full answer... - Replacing Hubs on Trailer with Unusual Bolt Pattern RecommendationFirst we have to figure out what spindle you have on your trailer to determine what hub/drum could fit it and then build from there to complete the setup. To this you will need to remove a hub from the axle and either get the bearing numbers or the dimensions of the spindle where the bearings and grease seal ride. See the attached picture. From there you will want to check out the help article I attached that will walk you through the rest of steps to adding the brake assemblies to your...
view full answer...
- Determining Which Replacement Hub With 5 on 5 Bolt Pattern For M416 Military TrailerThanks for the picture! To determine the correct replacement hub to give your M416 military trailer the 5 on 5 bolt pattern you are looking for, you will need to determine the inner and outer bearings your current hub uses. The easiest way to do this is by pulling one of the hubs off, and reading the bearing number stamped on the face of the bearing like on the included picture of the # L44649. If your bearings are worn to the point that you cannot read the bearing numbers, you will...
view full answer...
- Hub and Drum Assembly for 3,500 Pound Axle with 6 on 5-1/2 Bolt Pattern Hub Group 8-250The 8-250 hub and drum assemblies are unique in that they feature that 6 on 5-1/2 bolt pattern normally seen on higher capacity hubs. For a replacement you can use # 84656UC3. The bearings, races, and seal are included. You will also get a grease cap and new lug nuts with it. If your trailer has EZ lube axles with the grease fittings at the ends then you would need # 84656UC3-EZ instead. I have linked a couple of videos on these assemblies for you to check out.
view full answer... - How To Measure the Bolt Pattern on a 15 Inch Wheel With 5 Lug Bolt HolesWhen measuring to determine the bolt pattern of a wheel with an odd number of lugs, like a 5 lug wheel, you are basically measuring the diameter of a circle that would run through the center of each lug hole. If you are measuring the wheel the easiest way is to measure the distance between the center of one lug hole to the center of the lug hole adjacent to it, then look on the chart and if that measurement is 2-5/8 inches the bolt pattern is 5 on 4-1/2. If it measures 3 inches the bolt...
view full answer...
- How to Add Surge Brakes to a Boat Trailer with Idler HubsSince you have a brake mounting flange on your boat trailer you could pretty easily install brakes on the trailer. Most likely the mounting flange is a 4 bolt flange (all 4 bolt flanges are the same), since your trailer is most likely not too heavy if it didn't come with brakes. You should have no problem with the inner fender well either since they aren't currently interfering with your brake mounting flanges. The wheel assembly will sit in the exact same position with hub drums on the...
view full answer... - Replacement Wheel Studs for Dexter Trailer Hubs 8-249For a Dexter trailer hub stamped 8-249 which is our part number # 84556UC3 the correct wheel stud replacements are part # 7-122.
view full answer... - Replacement Hub with Inner Bearing LM48548 and Outer Bearing L44649I may have a solution for you, but we do not have any hubs that are compatible with the # LM48548 inner bearing that you've currently got in your hubs. Additionally the # 84556UC3 is not going to fit your spindle because the # L68149 outer bearing it contains is going to be slightly too big. You could continue to use your old hubs and simply replace the bearings with the # LM48548 and # L44649. For the races, you'll want # Replacement Race for LM48548 Bearing # LM48510 and # L44610 and...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Jacob T
Installed by:
Patrick B
Installed by:
Kevin C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
10/26/2023
I apologize that it arrived this way. I will have our Customer Service team reach out to you.