Hub and Drum Assembly for 3,500 Pound Axle with 6 on 5-1/2 Bolt Pattern Hub Group 8-250
Question:
i had to replace one drum a few years ago, i would like 3 more, it shows 2 different numbers on it 1 8-250 the other is 2 WF 1, 4D07, they are on a car trailer im certain it use to be a travel trailer they are 6 lug type
asked by: Lance C
Expert Reply:
The 8-250 hub and drum assemblies are unique in that they feature that 6 on 5-1/2 bolt pattern normally seen on higher capacity hubs. For a replacement you can use # 84656UC3. The bearings, races, and seal are included. You will also get a grease cap and new lug nuts with it.
If your trailer has EZ lube axles with the grease fittings at the ends then you would need # 84656UC3-EZ instead. I have linked a couple of videos on these assemblies for you to check out.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Search Results: l44610
- Shop: Trailer Spindle Nut 1"
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Video: TruRyde Trailer Bearings Races Seals Caps - Caps - F001518 Review
- Shop: D Washer for EZ Lube Spindles
- Shop: LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Shop: Grease Cap - 1.988" Outer Diameter - Drive In
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Q&A: How to Find Correct Trailer Hub
- Video: Review of Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 84656UC3-EZ
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 84656UC3 Review
- Shop: Replacement Trailer Hub Bearing - L68149
- Video: Review of CE Smith Trailer Hubs and Drums - Idler Hub - CE13515
- Search Results: spindle dimensions
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU84FR
- Q&A: Replacement Spindles For 3,500LB Trailer Axle With Tapered Spindle with 1-1/16" & 1-3/8" Bearing ID
- Q&A: Recommended Wheel Bearing Grease for Trailer
- Q&A: What Size of Spindle is Needed for a 3,500-Lb Axle
- Shop: RV Exterior Lighting
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Q&A: Picking Out Replacement Hub for Nitro Boat Trailer
- Q&A: Replacement Hub Recommendation for Dexter Hub 8-250
- Search Results: brake coil
- Search Results: coil
- Search Results: fender