Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2
(39 reviews)
Price: $118.82
In Stock
Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2
Item # 8-213-5UC1-EZ
Our Price: $118.82
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (39)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - 8-213-5UC1-EZ
- 6 on 5-1/2 Inch
- For 5200 lbs Axles
- Hub
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- EZ Lube
- LM67048
- 25580
- Dexter
Hub is designed for use on trailer idler axles. Fits 5,200-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
- Trailer hub assembly fits idler axles
- Bearings, races, seal, grease cap, wheel bolts, and lug nuts are included
- E-Z Lube-compatible grease cap makes lubricating bearings fast and easy
- Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
- Sturdy iron construction
- Hub and drum are made in the USA
Specs:
- Application: 5,200-lb E-Z Lube trailer axles
- Wheel size: 14" to 16-1/2"
- Bolt pattern: 6 on 5-1/2"
- Grease cap flange diameter: 2.44"
- Wheel stud diameter: 1/2"
- Weight capacity: 3,000 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: 25580 (1.75" inner diameter)
- Outer bearing: LM67048 (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: LM67010
- Grease seal (included): 10-10
- Inner diameter: 2.125"
- Outer diameter: 3.376"
E-Z Lube-Compatible Hub for Simple Lubrication
The grease cap on this hub is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
K08-213-92 Dexter Trailer Idler Hub Assembly for 5.2K Axle with Hardware - 6 on 5-1/2 - EZ Lube
Replaces 8-213-5UC1-EZ
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Defective
Customer Reviews
Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2 - 8-213-5UC1-EZ
Average Customer Rating: 4.8 out of 5 stars (39 Customer Reviews)
Hub is designed for use on trailer idler axles. Fits 5,200-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and lug nuts included.by: DICKY TAKARA WAIPAHU,HI01/23/2024
THANKS ETRAILER THE DEXTER TRAILER HUB WAS PERFECT FOR MY NEW INSTALLATION
by: Jack 12/23/2023
Very easy online ordering, good prices and they were shipped and received in a few days. Can't beat good service.
by: Randy 11/13/2023
When one box was lost, you went right to the warehouse and got another 1 shipped ASAP. I appreciate that Author, thank you.
by: David F04/07/2024
Thank you for your help. parts came quickly and are now installed and in use.
by: Carolyn 10/04/2023
Well built and fit perfectly
by: Steven 11/06/2023
Delivered before date given. very good.
Joshua very helpful
by: Christopher10/07/2020
was happy with the whole experience... Every one was helpful and professional
by: greg06/13/2016
Super fast shipping. Rare hub that nobody supplied locally so I ordered it through etrailer. Put it on hay wagon and hauled today. Etrailer's shipping time is awesome. Highly recommended
by: Christian06/18/2023
Great quality product
by: Kenneth C.03/10/2014
Great product and just what I needed for my trailer. very fast shipping also. I would purchase from them again.
Kenneth C.
3/10/2015
They are still working like a charm. have not had any issues out of them.
by: Carlos12/09/2016
Hey everybody I just wanted to let you know that I'm very happy with with etrailer because their customer service is great ,I bought a set of hubs and one of them wasn't right I emailed them on a Saturday and they reply the next day ,told them what was happening and they didn't hesitate to send me another one. ..so recommend etrailer.com to everyone the prices are great and the service better..thanks etrailer.com...
by: CB01/18/2011
Good Job EtrailerI ordered 3 tire and rim packages with a couple of hubs for converting the modile home axle under my trailer to a normal lug hub. Just put them on tonight and hubs and tires spun centrally and were very smooth. The hubs were included in oversize boxes for the tires. The boxes were a little beat and the bearing kits were rubbing on the metal parts inside. Just a little more packageing would have prevented a little wearing on the small parts. Sorry guys, the tape just doesn't keep the parts in place to prevent damage. Good job E-trailer
by: Safarman 08/15/2019
I am in Honduras but i brought a trailer from Texas. No parts here, but these folks filled my order promptly. Solved our problem!
by: Chad04/24/2020
These hubs are great. I am currently running these with about 100,000 miles on them. Give them a little grease and travel worry free. Ordered a new set as backups. You can’t go wrong with etrailer.com either. Their customer service is among the best I have ever experienced, they will go the extra mile to get you the answers and products you need.
by: DEA01/28/2015
Worked great - attached to spindle welded to hudson bros trailer axle
by: brent t12/26/2014
The hub and bearing combo I ordered came in pretty quick, and was a perfect fit, the races already being pressed in was a big time saver.
by: Brian03/02/2019
Excellent product. Put on offroad trailer. Solid hub
by: Philip01/31/2020
I am very satisfied with axle stubs. I am using on a heavy-duty towable backhoe. Holding up real well.
by: Tim C.03/03/2011
As usual, eTrailer delivers an excellent product at an excellent price. Service and communication are top notch. They always get my business for all my trailer/towing needs.
by: TR09/10/2019
Works well for the trailer that was built.
by: Dennis10/14/2019
Awesome, Excellent, Fast.
Will buy from again in the future...
Dennis M.
10/15/2020
Its great, would buy again.
by: Robert 10/23/2020
Great quality parts, fast delivery, perfect replacement
by: Ron 07/18/2022
Good quality product
by: Michael 06/29/2021
perfect fit and easy install
by: Michael02/02/2018
completly satisfied
25
39
Show More Reviews
See what our Experts say about this Dexter Trailer Hubs and Drums
- Replacement Grease Seals Needed for 5.2K Dexter Axle Beam with EZ-Lube SpindlesThanks for the info! Looks like you got the Dexter Trailer Axle Beam with E-Z Lube Spindles # 6340624 and the Dexter Trailer Idler Hub Assembly # 8-213-5UC1-EZ. This means the grease seals you need are the 10-10 which comes in a pack of 2 with part # RG06-090.
view full answer... - Recommended Axle-Less Trailer Suspension System to Replace Axle on Truck Bed TrailerThe Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/ Brake Flange - 5,200 lbs # TASR5200S03 will work well for your old truck bed trailer. The Axle-less system will allow you to have a custom fit to your trailer frame. You will simply bolt the assemblies to the frame and then run a 2 inch square bar (not included) through the integrated holes in the assembly. Then add the brakes and hubs and compatible wheels and you'll be good to go. The wheels in your current photo...
view full answer...
- Raising Trailer with Welded On Torsion AxlesThere is a solution for you, but the lift kits you referred to such as # K71-725-02 will not work with welded on torsion axles. The best option is for you to simply remove your torsion axles and use the Timbren Axle-Less Trailer Suspension System # TASR5200S03, which is rated for 5,200 lbs and has a 4" lift spindle. With these you would need Hub and Drum Assembly # 8-201-5UC3-EZ or Idler Hub Assembly # 8-213-5UC1-EZ. With the Timbrens there is no alignment needed; the system does come...
view full answer... - Replacement Idler and Hub Drum Using LM67048 and 25580 Bearings with 2.25 I.D. Grease SealIt sounds like you have two 5200 or 6000 lb capacity axles with a 6 on 5-1/2 bolt pattern. If this is the case, we have some hubs that will work for you. If you have EZ lube spindles, you would need the # 8-213-5UC1-EZ idler hub, and the # 8-201-5UC3-EZ hub/ drum. If you have standard spindles, you would need the # 8-213-5UC1 idler hub, and the # 8-201-5UC3 hub/ drum. The hubs include bearings, races, a grease seal and dust cap but the included grease seal will have the wrong inside...
view full answer... - Recommended Timbren Axle-Less Suspension System for Camper TrailerTimbren axle-less suspension kits like # A35RS545E, which is rated for 3500-lbs and that includes electric drum (not disc) brakes, can make trailer fabrication a lot easier since they bolt or weld directly to the trailer's frame. This 3500-lb kit is the highest-rated kit that includes electric brakes. We also offer a similar kit with 4-inch drop spindles that allow the trailer to sit lower, part # A35RD545E. Note that two sets of Timbrens can be used together, as in a tandem axle set-up. In...
view full answer... - Replacement Hub Solution for Dexter 8-155Yes, we had a customer who was able to replace his Dexter 8-155 hubs with the # 8-201-5UC3-EZ that you referenced so they should work well for you. You can verify that this hub will work for you by pulling your current hub and making sure they have inner bearing 25580 and outer bearing LM67048.
view full answer... - Can I Mount A 5 Lug land Cruiser Wheel To The Timbren 5200lb HD AxleThe only hubs that are compatible with the Timbren 5200lb HD Axle like part # T99GR are going to be 6 lug hubs like the # 8-213-5UC1-EZ. We do not offer any 5 lug hubs compatible with this axle, so there is not going to be a way to mount a 5 lug Land Cruiser wheel on this axle. Our recommendation is to go with different wheels, like the Dexstar Steel Mini Mod Trailer Wheel # AM20746, which is a 16" silver 6 lug trailer wheel.
view full answer... - Idler Hubs and Hub/Drums That Use Bearings 25580 and LM67048All idler hubs and hub/drums that use your bearing set # 25580 and # LM67048 appear on the linked page. For the idler hub use either standard 6-on-5-1/2 hub # 8-213-5UC1 or EZ-Lube hub # 8-213-5UC1-EZ. These include seals with a different I.D. so you'll also need 2.250-inch I.D. seal # GS-2250DL. For a 6-on-5-1/2 hub/drum use either standard model # 8-201-5UC3 or EZ-Lube model # 8-201-5UC3-EZ. Again you'll need to add the alternate seals # GS-2250DL. These various hubs use either a...
view full answer... - Which Hubs Fit the # TRU37FR SpindleIf you need a 6 lug on 5.5 inch bolt pattern then you will need the following hubs. 8-213-5UC1-EZ 6 on 5.5 Idler Hub Bearings 25880 inner and 15123 outer 8-201-9UC3-EZ 6 on 5.5 Hub and Drum Bearings 25880 inner and 15123 outer If you need a 8 lug on 6.5 inch bolt pattern then you will need the following hubs. 8-231-9UC1-EZ 8 on 6.5 Idler Hub Bearings 25880 inner and 14125A outer 8-219-4UC3-EZ 8 on 6.5 Hub and Drum Bearings 25880 inner and 14125A outer Keep in mind that when using...
view full answer... - Determining Correct Axle Upgrade For 2018 Grand Design Imagine Travel TrailerI would be happy to make a recommendation for upgraded axles and suspension components for your 2018 Grand Design Imagine 2670MK, but first I will need a few measurements from your current components. Starting with the axle you will need to measure your current axles from hub face to hub face and from spring center to spring center to determine the correct length the replacement axle would need to be. For example the Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 5,200 lbs...
view full answer...
- Recommended Idler Hubs for Timbren Heavy-Duty Axle-Less Trailer Suspension 3,500 lbsIn order to add an idler hub (no brakes) to the Timbren Heavy-Duty Axle-Less Trailer Suspension part # TASR35HDS06 you'd need to use either the Dexter Trailer Idler Hub Assembly part # 8-213-5UC1-EZ which has a 6 on 5-1/2" bolt pattern or the Dexter Trailer Idler Hub Assembly part # 8-231-9UC1-EZ which has a 8 on 6-1/2" bolt pattern. Please note, if you go with the former you'll need a different grease seal, the Grease Seal part # GS-2250DL. I have attached some of our wheel/tire options...
view full answer... - Replacement Wheel Bearings for Dexter 5,200 lb AxleThe Replacement Trailer Hub Bearing # 15123 and the Replacement Trailer Hub Bearing # LM67048 have the same inner diameter so both would fit the spindle correctly. The race inside the hub is where the difference in bearings would be, so if you traded out the entire hub to pair the bearing with the corresponding race there wouldn't be an issue.
view full answer... - Replacement Drop Axle for Old Horse Trailer with 6 on 5-1/2 Inch Bolt PatternI would love to help but we do not have any trailer hubs that correspond to the dimensions that you provided. Therefore, the only option we can offer you would be to replace the axle all together. In order to offer a replacement for this we would need to know your spring center and hub face measurements (see photo). If you can provide me with these I can then see if we have an axle suitable for your trailer. For example, the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindle part...
view full answer...
- Recommended Leaf Spring Axle and Lift Kit For Trailer With 9000lb Torsion AxleI would be happy to recommend everything you will need to replace your 9000lb torsion axle with a leaf spring axle and an everything needed to get it installed, but unless your current axle has a 3-4" drop spindle you will not be able to raise the trailer by the 7" you are looking for. Since you mentioned your 9000lb axle is twice the strength you need, the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" - 7,000 lbs # 8327834-EB may be a great option but...
view full answer...
- Upgrading Dexter 8-222 Trailer HubsThe Dexter 8-222 was used on a mobile home axle, according to my research. Mobile home axles are meant for a one time use, so there aren't compatible replacement hubs available. If you need replacement bearings and seals, you will use # L68149 for the inner and # LM67048 for the outer. For the Grease Seal you will need # 10-40. If you can provide the hub face to hub face and spring center to spring center distance, we might have an off the shelf replacement axle that uses common bearing...
view full answer... - Replacement Trailer Hub Needed with Inner 25580 and Outer LM67048 Bearings, and National 442109 SealWe do have a variety of hubs that have the matching specs that you are looking for. I have attached a link of our selection for you to filter through. If you are looking for a hub and drum assembly then I recommend going with the Dexter Assembly part # 8-201-5UC3-EZ. If you are just needing an idler hub then I recommend going with the Dexter Idler Hub part # 8-213-5UC1-EZ instead. Both hubs feature a 6 on 5-1/2" bolt pattern, are compatible with a 5,200 lb trailer axle, and come with...
view full answer... - How to Use a 3,500Lb Timbren Axle-Less Trailer Suspension System with 6 on 5-1/2 Inch Bolt PatternYes, there is a 3,500lb Timbren Axle-Less Trailer Suspension that will allow you to use trailer hubs with a 6 on 5-1/2" bolt pattern but you will need to use the Heavy-Duty version part # ASR35HDS01. This system has larger spindles which will be compatible with trailer hubs that have the bolt pattern you requested. If you just need idler hubs and do not have brakes then you can use the Dexter Trailer Idler Hub Assembly part # 8-213-5UC1-EZ which uses a 25580 inner and LM67048 outer bearing....
view full answer... - Recommended 5200lb Dexter Axle To Replace 5200lb Lippert Axle W/ 86-1/2" Hub Face MeasurementI reached out to my contact at Lippert and based on the information you provide your axle has an axle rating of 5200lb, measures 86-1/2" hub face to hub face, 68-1/2" spring center to spring center, has the springs installed above the axle, and uses the 6 on 5-1/2" bolt pattern. For a replacement Dexter axle we have the Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs # 8327816 or the # 8327816-EB which already has the brakes and hub and drum assemblies installed...
view full answer... - Hub Bolt Pattern and Bearing Compatibility with 5K Trailer AxlesYour existing 3500-lb hubs could be used on a 5K axle if the spindles on both axles used the same inner and outer bearings. But usually these two different axle capacities mean different bearings with very different dimensions. That means 3500-lb hubs will not fit. Also 5K hubs use the 6-on-5-1/2 wheel bolt pattern. The most common bearings for a 3500-lb axle are # L68149 (inner) and # L44649 (outer) while a 5200-lb axle typically uses bearings # 25580 (inner) and # LM67048 (outer). If...
view full answer... - Lifted Axle Setup for Trailer with 3,000 lb GVWRThe Timbren Axle Less kit part # ASR35HDS05 would be your best option as it has a 4 inch lift built into it and has a 3,500 lb capacity. Then for idler hubs the part # 8-213-5UC1-EZ would be a great option which fit this spindle and also have a 6 on 5-1/2 inch bolt pattern.
view full answer... - Matching Idler Hub To The Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles The Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles # 8-201-5UC3 has a 6 on 5-1/2 bolt pattern, 1/2" studs, and uses LM67048 and 25580 bearings so you'll need to use the Dexter Trailer Idler Hub Assembly for 5,200-lb Axles # 8-213-5UC1. If you have EZ-Lube axles then you'll want part # 8-213-5UC1-EZ instead to get the correct dust cap for easy access to the grease zerks.
view full answer... - Measurement Of Through Length Of 6,000 lb Capacity Hub # 8-213-5UC1-EZ The through length of the Trailer Hub Assembly - 5,200-lb and 6000-lb Axles - 6 on 5-1/2 - E-Z Lube, # 8-213-5UC1-EZ is 4-3/4 inches. I went out to the warehouse to measure it for you. This is outside edge to inside edge on only the hub, not the cap.
view full answer... - Recommendation for Converting Fleetwood Neon Pop-Up to Axle-Less Suspension System with Jeep TiresTo convert your offroad trailer to the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/ Brake Flange - 5,200 lbs # TASR5200S03 you will either use a crossbrace for your trailer frame at the axle location or you will add a 2 inch square tube between the assemblies (not included) into the integrated holes of the assemblies. This will give you much more ground clearance than a standard axle and will also include the suspension needed. Unfortunately that 5,200 lb Timbren...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Installed by:
Patrick B
Installed by:
Conner L
Video Edited:
Jacob T
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Greg
6/19/2017
Hub still working after hauling thousands of pounds of hay on 1.5 hour trips....No problems