Idler Hubs and Hub/Drums That Use Bearings 25580 and LM67048
Question:
Need to find replacement hub kit for the following. Bearings are inner 25580 outer LM 67048 race/seal diameter is 2.250 I would like an idler set and a hub/drum set. It is for a 2 axle setup.
asked by: Franklin H
Expert Reply:
All idler hubs and hub/drums that use your bearing set # 25580 and # LM67048 appear on the linked page.
For the idler hub use either standard 6-on-5-1/2 hub # 8-213-5UC1 or EZ-Lube hub # 8-213-5UC1-EZ. These include seals with a different I.D. so you'll also need 2.250-inch I.D. seal # GS-2250DL.
For a 6-on-5-1/2 hub/drum use either standard model # 8-201-5UC3 or EZ-Lube model # 8-201-5UC3-EZ. Again you'll need to add the alternate seals # GS-2250DL.
These various hubs use either a 6-on-5-1/2 bolt pattern or a 6-on-6 bolt pattern and are rated for use on 5200-lb and 6000-lb axles.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- LM67048
- For 5200 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- LM67048
- For 5200 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Dexter Trailer Idler Hub Assembly for 5,200-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- LM67048
- For 5200 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- EZ Lube
- 25580
- LM67048
- For 5200 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Where to Position the Trailer Axle?
- Q&A: Spindle Recommendation for a Square 2x2 Axle
- Q&A: What Size Trailer Hitch Receiver Opening Comes On a 2024 Chevrolet Silverado 3500?
- Q&A: Are the Safety Struts for the etrailer Cargo Carrier Included
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Q&A: Are #84 Spindles Threaded into the Axle?
- Q&A: Increasing Spring Tension for Lifting Ramp with Rack'Em Double Barrel Utility Trailer Tailgate Lift
- Q&A: Drag Roller Recommendation for Boat Trailer with Prop Protector Cut Out
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Picking Out Replacement Hub for Nitro Boat Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule