Raising Trailer with Welded On Torsion Axles
Question:
I read with interest your article on raising a trailer with the kits you recommended. I have a small 12foot box 1993 4 Star goose neck with tandem 5200 lb torsion axles. I have no idea of their manufacturer. I just purchased a 2018 Chevrolet Silverado 2500HD, gas not diesel, and the bed height is 3 or 4 inches higher that my previous 2010 F250 Super Duty and the bed rails also are a bit taller. If I set the hitch height to give me a comfortable distance between the top of the bed and the trailer the trailer sits at an unacceptable angle squatting on the rear wheels. Thus I need to raise the trailer. These axles appear to be welded into place, not bolted. Can the kits you referenced be made to work in this situation or is there another solution. It looks to me that the two welds on the flange at each end of the axle could be cut free and a proper length of 2inch square tube inserted and then weld everything back into place. Assuming there is no kit for this. I worry about keeping the axles in proper alignment both with the trailer and with each other without some sort of jig. My question is two-fold: Is there a kit for this and how is proper alignment maintained?
asked by: Terry V
Expert Reply:
There is a solution for you, but the lift kits you referred to such as # K71-725-02 will not work with welded on torsion axles.
The best option is for you to simply remove your torsion axles and use the Timbren Axle-Less Trailer Suspension System # TASR5200S03, which is rated for 5,200 lbs and has a 4" lift spindle. With these you would need Hub and Drum Assembly # 8-201-5UC3-EZ or Idler Hub Assembly # 8-213-5UC1-EZ.
With the Timbrens there is no alignment needed; the system does come with shims so you can make minor adjustments.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- LM67048
- For 5200 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- EZ Lube
- 25580
- LM67048
- For 5200 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 5 Bolt Flange - 5,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 5200 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Product Page this Question was Asked From
Torflex Lift Kit - Tandem Axle - 3-1/8" Lift
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Tandem Axle
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Torflex Lift Kit - Tandem Axle - 3-1/8" Lift
- Shop: Fifth Wheel Hitch
- Shop: Curt OEM 5th Wheel Hitch Legs for Ram Towing Prep Package - 30,000 lbs
- Shop: Curt PowerRide 5th Wheel Trailer Hitch for RAM Towing Prep Package - Dual Jaw - 30,000 lbs
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 5 Bolt Flange - 5,200 lbs
- Video: Review of CURT Universal Fifth Wheel Base Rails Dark Gray - C99JR
- Search Results: c16104
- Shop: Curt Custom Fifth Wheel Installation Kit for Ram - Glossy Black
- Shop: Curt Semi-Custom Fifth Wheel Installation Kit - Dark Gray Finish
- Shop: Curt Universal Fifth Wheel Base Rails - Dark Gray Finish
- Video: Review of CURT Fifth Wheel Hitch - Ram OEM Hitch Legs - C65WR
- Search Results: tail lights
- Search Results: fenders
- Article: How to Raise Your Travel Trailer Height
- Video: Buyers Products Tie Down Anchors - Trailer Tie-Down Anchors - 337B2402AL Review
- Q&A: Can I Lift A Trailer With Torsion-Axle Rubber Ride Suspension?
- Search Results: dexter torsion axle lift kit
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Video: Dexter Axle Torflex Lift Kit Review
- Q&A: When Should Trailer Wheel Bearings be Replaced
- Search Results: k71~385~00
- Video: Dexter Axle Trailer Axles K71-725-02 Review
- Q&A: Horse Trailer Lift Kit Options
- Q&A: What Lift Kit Fits My 7,000 Pound Dexter Torflex Axles?
- Search Results: alignment and lift kits
- Search Results: lift kit
- Q&A: Effect on Trailer Handling from Installing Axle Over-Under Flip Kit
- Q&A: Replacement 3500-lb Axles for Car Hauler Trailer
- Shop: Trailer Wiring
- Q&A: Swapping 5 Lug Hub Drum for EZ Lube Spindle with 6 Lug Hub Drum for Standard Spindle