Replacement Trailer Hub Needed with Inner 25580 and Outer LM67048 Bearings, and National 442109 Seal
Question:
Looking to convert to a new hub assembly. Here are the numbers I found currently on the trailer Im rebuilding: Outer Bearing: # LM67048 Inner Bearing: # 25580 Seal: National 442109 Here are the measurements taken, per your diagram: E - 1" D - 1.25" C - 1.75" B - 2.125" A - 2.25" I would need 4 replacements hubs. Please let me know what you can find.
asked by: ALAN G
Expert Reply:
We do have a variety of hubs that have the matching specs that you are looking for. I have attached a link of our selection for you to filter through.
If you are looking for a hub and drum assembly then I recommend going with the Dexter Assembly part # 8-201-5UC3-EZ. If you are just needing an idler hub then I recommend going with the Dexter Idler Hub part # 8-213-5UC1-EZ instead.
Both hubs feature a 6 on 5-1/2" bolt pattern, are compatible with a 5,200 lb trailer axle, and come with an Inner Bearing # 25580, Outer Bearing # LM67048, and Grease Seal # RG06-090 which has a 2.125" ID.
I did look up the specs for the National 442109 grease seal that you mentioned and it has an ID of 2.250. If this is the case then you will want to order the Grease Seals part # RG06-070 instead.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- EZ Lube
- 25580
- LM67048
- For 5200 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
10-10 Grease or Oil Double-Lip Seals - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.125 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- LM67048
- For 5200 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Q&A: Troubleshooting A Clunking Noise Between A Fifth Wheel Hitch And Base Rails While Towing
- Q&A: Scissor Jack Recommendation to Replaced Damaged Ones on R Pod Trailer
- Q&A: Correct Replacement for Advent Analog Wall Thermostat ACTH1
- Article: Best Ladder Racks
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Replacement Parts for Fan-Tastic Vent 8000 Series
- Article: Most Popular Wheel Bearings
- Q&A: Correct Replacement Oil Seal 225255UC for Ranger Boat Trailer
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: Trailer Wiring Diagrams
- Article: How to Survive the Winter In Your RV