bing tracking image
Customer Service My Orders
3 min
Q & A Icon

Replacement Idler and Hub Drum Using LM67048 and 25580 Bearings with 2.25 I.D. Grease Seal  

Question:

I have been told that they dont exsist, LM67048 = 1.250 Inch I.D. 25580 = 1.750 Inch I.D. Seal = 2.25 Inch I.D. I would need 2 Idlers and 2 drums/Hubs Is this a true statement? Or should i look at replacing everything? Thank You

0

Expert Reply:

It sounds like you have two 5200 or 6000 lb capacity axles with a 6 on 5-1/2 bolt pattern. If this is the case, we have some hubs that will work for you.

If you have EZ lube spindles, you would need the # 8-213-5UC1-EZ idler hub, and the # 8-201-5UC3-EZ hub/ drum.

If you have standard spindles, you would need the # 8-213-5UC1 idler hub, and the # 8-201-5UC3 hub/ drum.

The hubs include bearings, races, a grease seal and dust cap but the included grease seal will have the wrong inside diameter. You can obtain the proper double-lip grease seal separately, part # RG06-070 which are sold in pairs.

This assumes that the hubs you are replacing have 1/2 inch studs and the hub/ drum you are replacing is 12x2 and the bolt pattern of your existing hubs is 6 on 5-1/2.



expert reply by:
0
Mike L
Ask The Experts a Question >>

Products Referenced in This Question






Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>