bing tracking image
  1. Trailer Hitch Ball Mount
  2. Buyers Products
  3. Fits 2 Inch Hitch
  4. Adjustable Ball Mount
  5. Drop - 6 Inch
  6. Rise - 6 Inch
Buyers Products Adjustable Tri-Ball Mount for 2" Hitches - 6" Drop/Rise - Solid Shank

Buyers Products Adjustable Tri-Ball Mount for 2" Hitches - 6" Drop/Rise - Solid Shank

Item # 3371802225
Retail:$187.37
Our Price: $154.14
You Save: $33.23
Trailer Hitch Ball Mount
Shipping Weight: 41 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Tow nearly any trailer with one supremely adjustable ball mount. Chrome-plated balls and black powder coated shank resist rust. Tow up to 6,000 lbs with the 1-7/8" ball; 7,500 lbs with the 2" ball; or 10,000 lbs with the 2-5/16" ball. Great Prices for the best trailer hitch ball mount from Buyers Products. Buyers Products Adjustable Tri-Ball Mount for 2" Hitches - 6" Drop/Rise - Solid Shank part number 3371802225 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (81)
  • Q & A (0)
  • Photos

Buyers Products Trailer Hitch Ball Mount - 3371802225

  • Fits 2 Inch Hitch
  • Adjustable Ball Mount
  • Drop - 6 Inch
  • Rise - 6 Inch
  • 1-7/8 Inch Ball
  • 2 Inch Ball
  • 2-5/16 Inch Ball
  • Three Balls
  • 10000 lbs GTW
  • Class IV
  • Buyers Products
  • Steel Shank - Gloss Black
  • Steel Ball

Tow nearly any trailer with one supremely adjustable ball mount. Chrome-plated balls and black powder coated shank resist rust. Tow up to 6,000 lbs with the 1-7/8" ball; 7,500 lbs with the 2" ball; or 10,000 lbs with the 2-5/16" ball.


Features:

  • Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle
    • Shank slides into hitch receiver
    • Ball provides connection point for trailer coupler
  • Adjustable height lets you tow trailers of different heights with the same vehicle
    • Slide ball mount up or down along shank and secure in place with included pins and clips
  • 3 Different-size hitch balls let you tow trailers with different coupler sizes
    • To switch ball, simply remove, rotate and reinsert drawbar
  • Chrome-plated balls are permanently attached
  • Solid shank is extra strong and durable
    • Black powder coat finish is corrosion resistant
  • Durable steel construction
  • Hitch pin and clip included (hitch lock sold separately)


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • 1-7/8" Ball
    • Gross towing weight: 6,000 lbs
    • Tongue weight: 600 lbs
  • 2" Ball
    • Gross towing weight: 7,500 lbs
    • Tongue weight: 750 lbs
  • 2-5/16" Ball
    • Gross towing weight: 10,000 lbs
    • Tongue weight: 1,000 lbs
  • Maximum drop: 6"
  • Maximum rise: 6"
  • Length (from center of hitch pin hole to center of hitch balls: 16"


How to Measure Drop on Adjustable Ball Mount


1802225 Buyers Products Adjustable Tri-Ball Hitch Solid Shank With Chrome Balls




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Buyers Products Adjustable Tri-Ball Mount for 2" Hitches - 6" Drop/Rise - Solid Shank - 3371802225

Average Customer Rating:  4.7 out of 5 stars   (81 Customer Reviews)

Tow nearly any trailer with one supremely adjustable ball mount. Chrome-plated balls and black powder coated shank resist rust. Tow up to 6,000 lbs with the 1-7/8" ball; 7,500 lbs with the 2" ball; or 10,000 lbs with the 2-5/16" ball.

by:

Nice piece - installation simple



by:

It'd Heavy Duty. It'll probably last longer than my truck.



by:

All around great hitch, sturdy and slick looking! Makes hauling a lot smoother and more balanced. Instead of having to carry around 3 different hitches, this makes everything much easier.



by:

The hitch looks first rate and plenty suitable for use on my F350 Super Duty. The price was very fair not to mention free shipping. I look forward to future transactions with etrailer. Thank you.

Rocky

1/5/2023

Excellent. My Ford F-350 4x4 is exceptionally high. The hitch is adjustable enough to accommodate whatever trailer I hook up to it.



by:

Excellent product and service. I would buy from you again or recommend to others



by:

Best service with quick delivery. Always arrives before due.



by:

I am totally unsatisfied with this product. It has way too much play in it. It sticks SO far back off the truck that i had to add about 10” of chain to all of my trailers to even be able to secure them to the hitch!!! Worst investment i ever made on a hitch. Will replace it as soon as i can come up with enough money to do so!!



by:

Havent used it yet .I like the heavy duty look



by:

Very well built! Heavy and solid. I like the adjust-ability and ease of use. The only hitch I'll need for all my trailers. No matter what size ball or how high or low the tongue is. This will stay with my pickup at all times. The only downside would be that the hitch is longer than necessary. I'm going to drill another hole in the 2 inch shaft to shorten it up a bit so my safety chains reach.



by:

Love my new hitch! Heavy, but fills a n eed.



by:

I found the product was exactly as described. The only reason for not giving it 5 stars was: I feel the bar that slides into the hitch could have had more holes for the customer to adjust how far it sticks out away from the truck. Other than that, performs as it should. Some customers complain about it rattling excessively I did not find it to be any noisier than the expensive one I had before.



by:

Very happy with this purchase. Nice, heavy duty hitch that is made well. Would recommend to anyone. Solid shank is nice, adjustment of different ride heights is super easy.



by:

Exactly what I needed without breaking the bank. Fast shipment and quality product



by:

Too heavy & bulky for my 2017 GMC Sierra 1500. Exchanging for B&W flush mount 3 ball hitch.



by:

Will use with my F 150. Perfect solution for needing to pick up any rental equipment and also hook up to my fellow contractors trailers. Heavy, sturdy, easily adjusted.



by:

Shockingly surprised. Very well built, exactly what the Dr ordered. (Caution) unit is solid and a little on the heavy side for my wife to maneuver around. Fantastic item.



by:

The hitchs that I order full filled my exspseption , thy were delivered in a timely maner much earlier than I had expected I am very satisfied with the product and the professionalism that wrecived from etrailer and the cost was was half of what I Could have bought the same product locally . Thank you etrailer



by:

Best hitch



by:

This is a very heavy duty well built hitch. Quality at its finest. Finally one hitch for all my needs.



by:

Ordered on Tuesday received Friday morning (free shipping) product is easy to assemble and is spectacular quality. Will be buying from e trailer in the future. Great customer service as well



by:

Received super quick! Thank you.



by:

Easy straightforward use.Sturdy strong and heavy would buy it again. Should last for a long time.



by:

Love it! So versatile. And so easy to adjust and use. Great product. Thank you.



by:

the hitch assembled very easy. Fits my pickup great.
nice quality. I would recomend this product.



by:

My husband has this hitch & has had it for several years. He loves it. Our grandson wanted one just like walk grandpa has, so this is his Christmas present. Excellent product.


25
81
Show More Reviews

See what our Experts say about this Buyers Products Trailer Hitch Ball Mount

  • Recommended Ball Mount With Multiple Balls That Can Also Have Pintle Hook
    I have another option for you, but there is not a pintle hook option for the Buyers Products Adjustable Tri-Ball Hitch - Solid Shank with Chrome Balls # 3371802225 you were looking at. Instead I recommend the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 16K # 325-GH-524 which includes a 2" hitch ball with a 12000lb trailer weight rating, a 2-5/16" hitch ball with a 16000lb trailer weight rating, and a pintle hook lock which can be placed over either...
    view full answer...
  • Complete Towing Package for 2020 Ram ProMaster 3500 Hitch, Wiring and Brake Controller
    The Curt Trailer Hitch Receiver Class III - 2" # C13207 is the one I recommend for your 2020 Ram ProMaster 3500 (excluding EXT models). It doesn't require any drilling so installing it is super simple. It's rated to tow up to 6,000 lbs and 600 lbs tongue weight. For a wiring kit that comes with everything you'll need to install a fully functional 7-way connector, the Tekonsha # 22112 is the way to go. You'll simply use the t-connectors to plug into the connection points behind your tail...
    view full answer...
    Image 1 for
  • Ball Mount with a 4 Inch Rise for a 2017 Kia Sportage
    Based on the installation video we did for etrailer hitch # e72TR on a 2017 Kia Sportage, see link, the distance from the ground to the top of the receiver opening is 13 inches. This means to get 17 inches you would need a ball mount with 4 inches of rise. But it also depends on how you are measuring. On the trailer use its jack to make the trailer level. Then measure from the ground to the bottom of the coupler. It is measured this way because the ball fits up inside the coupler and thus...
    view full answer...
  • Adjustable Ball Mount with 1-7/8 and 2 Inch Balls
    We do have some adjustable ball mounts that feature a 1-7/8 inch and 2 inch ball. We have Rapid Hitch # AM3411. We also have some with 3 balls (1-7/8, 2, and 2-5/16 inch) including # D900 and # 3371802225. I have included some links to videos for you.
    view full answer...
  • Recommended Adjustable Ball Mount with 1-7/8 Inch Ball for 2018 Chevy Colorado
    For your 2018 Chevy Colorado, I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise # BWTS10038B. This ball mount comes with 2 hitch balls one of which is the 1-7/8 inch ball you need. It is adjustable in 1 inch increments so you can make sure your trailer rides level. This hitch also has a really nice stow-away feature for a clean look when not in use. I've attached a video to assist. I also recommend you use a hitch lock like # e98880 to deter theft and...
    view full answer...
  • Will an Adjustable Ball Mount Work with a Ram 1500 with a Four-Inch Lift Kit?
    For a Ram 1500, the Buyers Products Adjustable Tri-Ball Mount, # 3371802225, will give you nearly six inches of drop and may work for your vehicle, but you are going to need to measure to make sure. To figure out which rise or drop you will need, first park your Ram and trailer on level ground. From there, measure from the ground to the top of the trailer hitch receiver on the Ram. Then measure from the ground to the bottom of the coupler on the trailer. You will need a ball mount with...
    view full answer...
  • Recommended Trailer Hitch for 2006 Honda CR-V to Tow Motorcycle Trailer
    The Draw-Tite Max-Frame Trailer Hitch Receiver # 75690 referenced in your question is a great choice and is the hitch I recommend for your 2006 Honda CR-V. This is confirmed to fit your vehicle and will provide a 2 inch receiver opening with a 3,500 pound towing capacity. I do also recommend verifying the vehicle's towing capacity as listed in the owner's manual, as this will likely be the limiting factor. Based on the 19-21 inch hitch height of the trailer, you may simply need to use...
    view full answer...
  • Recommended Adjustable Ball Mount with Long Shank for Back of Class C Motorhome
    I'll start off by saying that in almost all cases, using a hitch extender will reduce your tongue weight by 50%, so your 350-lbs TW/3500-lbs towing capacity hitch is likely limited to 175-lbs TW and 1750-lbs towing. However, the Buyers Products # 3371802225 would likely be a good solution since it has 16" from the center of the hitch pin to the top of the hitch ball, so it will clear the 7" you've mentioned without issue. I really like that this ball mount comes with all 3 hitch ball sizes,...
    view full answer...
  • In Need Of A 2-5/16" Hitch Ball For A 2006 Toyota Tundra
    I can certainly point you in the right direction. Firstly, we suggest checking your owners manual and verifying that you can tow 6,000 lbs with your truck. If it is able to tow 6K or more then we can set you up. If you do not have a factory hitch, you can use the Curt class 3 hitch # C13180. This hitch can tow up to 6,000 lbs, so just enough for your horse trailer. As far as a ball mount and 2-5/16" ball I recommend using an adjustable ball mount like the bulletproof hitch # MD206. This...
    view full answer...
  • Ball Mount to Tow Trailer With Clevis Hitch
    We do have some options for you to tow a trailer with a clevis mount but the Buyers Products Adjustable Tri-Ball Mount # 3371802225 that you referenced doesn't have provisions for that. Instead you can either use the Convert-A-Ball # CAB-6W which comes with 3 different hitch ball sizes plus the clevis or the Curt # C45008 which has 2 hitch balls and the clevis but you need a shank like part # C17100 to mount it to for adjustability. Attached are some review videos for you to check out.
    view full answer...
  • Selecting a Hitch Ball and Brake Controller for a 2007 Ford F-150 Towing a Car Hauler
    Before selecting the appropriate hitch ball and ball mount, you will want to check the gross trailer weight, GTW, and tongue weight, TW, capacities of your 2007 Ford F-150 and your trailer hitch. If you are going to be towing a car hauler, then you will want a ball and mount with the highest possible GTW and TW that is compatible with your truck and trailer hitch. I would definitely recommend a 2-5/16 hitch ball with a 1-1/4 inch shank like the Curt Trailer Hitch Ball, part # 63840, and...
    view full answer...
  • Adjustable Height Setup for Lock N Roll Articulating Hitch Setup
    While the shank of your current Lock N Roll articulating hitch would fit into the hitch opening of the # 3371802225 we can't recommend you go that route as it was not intended for use in any other way aside from with the adjustable ball mount setup. Your best and safest solution would be the Lock N Roll Articulating Hitch part # 336VS503515. This gives you the height adjustability and since it's been tested there'd be no concern that it would be a dangerous setup.
    view full answer...
  • Can Longer Shank Be Used With Buyer's Products 3371802225 Adjustable Ball Mount
    The longest shank we offer is part # EQ90-02-4600 from Equal-i-zer which is 18 inches long overall or 14 inches from the center of the hitch pin hole to the centers of the adjustment holes on the shank. As it sits, the center of the hitch pin hole to center of trailer ball hole on the # 3371802225 is 16 inches. If the # EQ90-02-4600 shank is used, that distance would be about 21-5/8. The series of height adjustment holes are spaced the same on the # EQ90-02-4600 shank, so It would work...
    view full answer...
    Image 1 for
  • Recommended Towing Setup for 2005 Ford F-350 Transporting a Truck Camper and 30ft Boat Trailer
    You might not need a hitch extender or weight distribution. It is possible that a long ball mount will have the length needed to provide clearance for towing the trailer. Ball mount # 40331 measures 9-1/4 inches from the center of the pin hole to the center of the ball hole. It is rated for 16,000 pounds gross trailer weight and it has a 3 inch rise or 4 inch drop. Another ball mount to consider is the Buyers Products # 3371802225. This ball mount will provide you 16 inches from center...
    view full answer...
  • Availability of Adjustable Ball Mount w/ 1-7/8 and 2 Inch Trailer Balls
    MaxxTow doesn't offer an adjustable ball mount that uses a 1-7/8 and a 2 inch ball, but Buyers Products offers the # 3371802225 which offers a 1-7/8, 2 and a 2-5/16 inch trailer ball. With the 1-7/8 ball in use, the adjustable ball mount has a 6000 lb capacity, or an 7500 lb capacity with the 2 inch ball and a 10000 lb capacity with the 2-5/16 inch ball. The adjustable ball mount offers up to a 6 inch rise or drop.
    view full answer...
  • Base Plates for 2016 Chevy Silverado 1500
    No, a ball mount will not work as a way to flat tow your 2016 Chevy Silverado, you will need to add base plates to your truck and then use a high/low adapter. I've linked the page below to your options to assist.
    view full answer...
  • Recommended 3 Ball Ball Mount For 2017 Jeep Grand Cherokee
    The Curt Slim Adjustable 2-Ball Channel Mount - 2" Hitch - 3-3/4" Drop, 3-1/2" Rise - 10K # C46KR does not have a 1-7/8" hitch ball option, so instead I recommend Buyers Products Adjustable Tri-Ball Hitch - Solid Shank with Chrome Balls # 3371802225 which has a 1-7/8", 2", and 2-5/16" hitch ball allowing you to tow any trailer you need. I included a video of the # 3371802225 for you to take a look at.
    view full answer...
  • What Is the Tongue Weight Rating of the Buyers Products Adjustable Tri-Ball Hitch
    The tongue weight of the hitch balls on the Buyers Products Adjustable Tri-Ball Hitch part # 3371802225 is going to be 600 lbs for the 1-7/8" hitch ball, 750 lbs for the 2" hitch ball, and 1,000 lbs for the 2-5/16" hitch ball.
    view full answer...
  • Usable Shank Length of Buyers Products # 3371802225 Adjustable Tri-Ball Ball Mount
    The manufacturer didn't have a build sheet for the # 3371802225 ball mount they could provide me, but I was able to get the particular measurement you were seeking. The distance from the center of the hitch pin hole to the beginning of the welded gusset is 4-3/8 inches, as you can see in the photo I've provided for you. If you click the provided link, you can see the product description video for this product.
    view full answer...
    Image 1 for
  • Can Locking Pins be Used for the Buyers Products Adjustable Tri-Ball Hitch
    You can definitely purchase locking pins like the InfiniteRule Locking Pins # 34061775-D to lock both the adjustable ball mount and the shank for the Buyers Products Adjustable Tri-Ball Hitch # 3371802225. These all come keyed alike and I test fit them to verify that they work together with the Tri-Ball Hitch.
    view full answer...
  • How to Select Ball Mount to Allow Hitched Trailer to Remain Level
    For a towing vehicle like your 2006 Toyota Sequoia you want to select the ball mount that allows your hitched trailer to remain level. A level trailer will tow better than one that is too low or too high at the coupler. I linked an article that explains how to measure to figure out the right ball mount, but another way to go is to use a kit with multiple parts, such as # 989900 or an adjustable ball mount like # C45900 or # 3371802225.
    view full answer...
  • Tri-Ball Adjustable Ball Mount for a 2014 Jeep Grand Cherokee Overland with 20 Inch Wheels
    Since you are towing multiple trailers with different heights then going with an adjustable mount is the way to go. Its also good to have because you never know what you might be towing in the future. We have a few different tri-ball adjustable ball mounts that you could use. Curt ball mount # D900 that you referenced is one of them. Buyers Products makes a similar ball mount, # 3371802225. The Curt has a 4" rise and 5-3/4" drop while the Buyers Products has a 6" rise and drop. Both are...
    view full answer...
  • Length of Buyers Products Replacement Tri-Balls # 3373020620 From Hitch Pin Center To End of Hitch
    The Buyers Products Replacement Tri-Balls # 3373020620 for Adjustable Tri-Ball Hitch # 3371802225 is 1" from the hitch pin center hole to the end of the hitch tube(see image). This is the same measurement for all the mounting holes as they are in line and not offset.
    view full answer...
    Image 1 for
  • Availability of Adjustable Ball Mount With Removable Stainless Steel Hitch Balls
    I have two ball mounts with removable stainless steel balls that have the same rise and drop. The hitch ball sizes are 2-inch and 2-5/16-inch. They are the Diversi-Tech Ball Mounts, part # DTALBM6600-2S, and the newer Solid Tow design in the Diversi-Tech Ball Mounts, part # DTSTBM6600-2S. The Solid Tow adjustable ball mount provides solid, rattle-free towing performance. A stainless steel pin, operated by the included hex tool, extends out from the shank and tightens the ball mount in...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch Ball Mount?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Andrew K
Installed by:
Andrew K
Employee Cole B
Installed by:
Cole B
Employee Lindsey S
Edited by:
Lindsey S
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Matthew E
Updated by:
Matthew E
Employee Kristina F
Written by:
Kristina F
Employee Rick G
Video by:
Rick G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.