bing tracking image
  1. Accessories and Parts
  2. Flint Hill Goods
  3. Tie Down Anchors
  4. Hardware
  5. Screws
  6. Sheet Metal Screw
Zinc Sheet Metal Screw - 8 x 3/4" Indented Hex Washer Head - Hex Slotted Drive

Zinc Sheet Metal Screw - 8 x 3/4" Indented Hex Washer Head - Hex Slotted Drive

Item # 31071
Our Price: $0.60
Accessories and Parts
Shipping Weight: 0.03 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Resistant to corrosion, these zinc-coated sheet metal screws perform well in outdoor applications, where they will be exposed to the weather. Hex-shaped and slotted heads can be turned with a screwdriver or a wrench. 1-800-940-8924 to order Flint Hill Goods accessories and parts part number 31071 or order online at etrailer.com. Free expert support on all Flint Hill Goods products. Great prices and Fastest Shipping for Zinc Sheet Metal Screw - 8 x 3/4" Indented Hex Washer Head - Hex Slotted Drive. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (30)
  • Q & A (0)
  • Photos

Flint Hill Goods Accessories and Parts - 31071

  • Tie Down Anchors
  • Hardware
  • Screws
  • Sheet Metal Screw
  • Flint Hill Goods
  • 3/4 Inch Long

Resistant to corrosion, these zinc-coated sheet metal screws perform well in outdoor applications, where they will be exposed to the weather. Hex-shaped and slotted heads can be turned with a screwdriver or a wrench.


Features:

  • Screw head sits flush on surface
  • Slotted, hex-shaped head can be turned with a standard screwdriver or a wrench
  • Sharp point eases starting
  • Size: #8 x 3/4"


31071 Flint Hill Goods #8 x 3/4" Hex Head - Slotted Zinc Sheet Metal Screw





Customer Satisfaction Score:


Customer Reviews

Zinc Sheet Metal Screw - 8 x 3/4" Indented Hex Washer Head - Hex Slotted Drive - 31071

Average Customer Rating:  4.8 out of 5 stars   (30 Customer Reviews)

Resistant to corrosion, these zinc-coated sheet metal screws perform well in outdoor applications, where they will be exposed to the weather. Hex-shaped and slotted heads can be turned with a screwdriver or a wrench.

by:

Vent is sufficiently built not as heavy duty as the one I replaced, but should do the job. Only other complaint would be that the butyl tape is placed inside the roof vent cover where it heats up and adheres to every point of contact. Ironically this was a complaint I saw mentioned on other reviews I had read before making the purchase. etrailer customer service was very helpful when placing the order and getting what I needed to get the job done.



by:

Thanks etailer for getting all our products so fast to us . Really appreciate the free shipping. We ordered a replacement roof vent with fan, great product, installed nicely. Couple weeks later realize our other vent was cracked, ordered another roof vent. My husband replace the first one, but I had to install the second one by myself due to him having back surgery. Was able to do in an hour, no problems, and it looks great. Sorry no pictures, I am scare of heights . Sherri-from NV



by:

Good quality, no rust after time outdoors.
Went
on teardrop trailer and after 11K trip all was well.
Keep up the good work.



by:

We purchase screws to mount an exterior range hood vent. They arrived in a timely fashion & were the correct size.



by:

It a screw.



by:

Should be made of stainless for outdoor use



by:

Arrived lightning quick! As soon as it stops raining I’ll be installing my new vents! Photos when I’m done



by:

Worked great for the install of roof ve nt.



by:

good hardware



by:

Delivery was on time and product for my needs was great. I have since purchase 7 products

Very happy.



by:

Worked as intended!



by:

Needed to spend another 27¢ to get free shipping, this screw did the job to perfection. 11/10.



by:

What can I say got what I ordered. It's a bag of screws



by:



by:

Yes, they are just screws.



by:

Nice, exactly what I wanted



by:

Just what I wanted



by:

Worked for what I needed



by:



by:



by:



by:



by:



by:



by:


25
30
Show More Reviews

See what our Experts say about this Flint Hill Goods Accessories and Parts

  • Does Ventline Exterior Wall Vent for RV Range Hood V2111-13 Have a Locking Damper
    The Ventline Exterior Wall Vent for RV Range Hood, part # V2111-13 in white and part # V2111-55 in black, do have pivoting latches that lets you lock the damper closed when not in use. This is a great feature for storage periods and prevents critters from entering the RV. Installation requires either re-using your RV's existing vent hardware or supplying new screws such as # 31071. You will also need a sealant to complete the install. We offer pure silicone sealant that remains flexible...
    view full answer...
  • Supplies Needed to Install Replacement Ceiling Vent
    The MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat # MA00-06200K will install in the exact same cutout as the stock vent. You will simply need some sealant and screws. Many will choose to use the Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White # 344270KITW. You don't absolutely need both butyl tape and sealant, so many will use the LaSalle Bristol XTRM Universal Self-Leveling Sealant - White - Qty 1 # 34427034145-1 or # 0160297 and then the Zinc Sheet Metal Screw...
    view full answer...
  • How Does the Garnish of the Redline 2-Way Pop-Up Roof Vent # 9106-2756 Install
    The garnish that comes with the Redline 2-Way Pop-Up Roof Vent # 9106-2756 does not come with any predrilled holes so you will need to drill holes where you want them and then use wood screws like part # 31071 to attach it to the interior of your trailer.
    view full answer...
  • Screw Recommendation for Installing Trailer Roof Vent # 9106
    The recommended screws for installing the part # 9106 that you referenced is the # 31071. This would work well on a sheet metal trailer wall/roof. The garnish part # 2756 would then fit over them just fine.
    view full answer...
  • Recommended Wall Vent for Enclosed Trailer with Gas Water Heater
    I recommend our Redline 2-Piece Polypropylene Trailer Vent # WHMAV2-WAVT2. This wall vent will work on a trailer wall up to 2 inches thick and can be installed in any convenient location on your enclosed trailer where you have or can make a 3-inch diameter hole. This wall vent is designed to provide a constant flow of air, and is louvered on one side so you can adjust it when installing for the best airflow and to help prevent water from getting in. You can use a sealant for installation...
    view full answer...
  • Recommended RV Range Hood Vent with Locking Damper
    The only range hood vents we offer are from Ventline, the Ventline Exterior Wall Vent for RV Range Hood part # V2111-13 for white or part # V2111-55 for black. These vents both have locking dampers so you can close them when not in use. That said, the locking mechanism is located on the outside of the vent and there is no way to operate them from inside the trailer. The vents are designed for a 10-1/2" wide x 3-3/4" tall rough opening. Please note, you will need screws part # 31071 and...
    view full answer...
  • Where to Install Redline 2-Piece Polypropylene Trailer Vent # HMAV2-AVT2
    The Redline 2-Piece Polypropylene Trailer Vent # HMAV2-AVT2 can be installed in any convenient location on your enclosed trailer where you have or can make a 3-inch diameter hole. These vents will work best when used in multiples, with some near the ceiling and some near the floor, to allow cooler air to enter through the lower vents and hotter air to exit through the upper vents. I recommend you use a sealant for installation, such as silicone caulk or Silicone Sealant # 0160297. You'll...
    view full answer...
  • What Exterior Vent Cover do I Need for My Range on My 2020 Forest River Alpha Wolf Travel Trailer?
    Without knowing the exact dimensions of your 2020 Forest River Alpha Wolf 26RL-L's range vent opening, we do have vents that may fit your application: - Ventline Exterior Wall Vent for RV Range Hood - Locking Damper - 1-3/4" Collar # V2111-55 - Ventline Exterior Wall Vent for RV Range Hood - Locking Damper - 5/8" Collar # V2111-03 Both of these vents have 10-1/2" wide x 3-3/4" tall rough openings. The # V2111-55 has a collar depth of 1-3/4" while the # V2111-03 has a collar depth of...
    view full answer...
  • Installing the Ventline Exterior Wall Vent # V2111-13
    The Ventline Exterior Wall Vent for RV Range Hood # V2111-13 will attach to the outside wall where the exhaust ducting or outlet exits your RV or trailer. You will just need 10 screws and sealant to install the unit. You can use existing screws from your previous wall vent or we have sheet metal screws # 31071 that you can use. For sealant, I recommend the TemPro 644 Silicone Sealant # 0160297. I have attached an installation video on this vent that you can also use for reference.
    view full answer...
  • Damper Operation & Installation of Ventline Exterior Wall Vent for RV Range Hoods V2111-55
    Yes, the internal damper in the Ventline Exterior Wall Vents for RV Range Hoods, parts # V2111-55 in black and # V2111-13 in white, opens automatically when you turn on the exhaust fan in your RV's kitchen range hood. These vents also have a locking feature for the damper that lets you keep it secured in the closed position. Two swiveling latches, one on each end of the damper panel, allow you to secure the damper for off-season storage or when in extreme temperatures when you will want...
    view full answer...
  • Does Ventline Exterior Wall Vent for RV Range Hoods V2111-55 Include Insect Screen
    The Ventline Exterior Wall Vent for RV Range Hoods # V2111-55 does not include a screen to block insects but it does have a lockable damper panel that lets you secure the damper when the range hood fan is not in use, such as during storage periods. This feature helps stop drafts that can cause your HVAC system to turn on unnecessarily. We also have this item in black as part # V2111-55. Installation requires hardware such as # 31071 (ten screws are needed) as well as a silicone rubber...
    view full answer...
  • Parts Needed to Install the Ventline Exterior Wall Vent # V2111-13
    To install the Ventline Exterior Wall Vent # V2111-13 that you referenced you will need 10 screws and sealant which is sold separately. You can use the TremPro 644 Silicone Sealant part # 0160297 and 10 of part # 31071 for the installation. An installation video has been linked for you to check out.
    view full answer...
  • Function Of Trailer Vents On Enclosed Trailer
    The vents we offer for an enclosed trailer like part # 9139 are designed to allow air into the trailer. None of the vents we offer create a pressurized condition in the trailer and none are equipped with an air filtration system to keep dust out. Some of the features on the vents like # 9139 allow you to adjust the amount of airflow in the trailer with a butterfly valve mounted on the inside of the vent which would be operated from inside the trailer. Other trailer vents, like part #...
    view full answer...
  • Replacement Lid And Operator Kit Recommendation For Ventline Ventadome Roof Vent
    If the vent you have installed on your trailer has a 4-point hinge like the attached photo, part # BVD0449-A01 would be the replacement lid for your Ventline roof vent. We do not offer a metal replacement lid with a 4-point hinge. The replacement knob and operator you asked about for your fan is part # BVD0462-00. If you want to replace the vent with one that has a metal lid I recommend part # V2110SP-24. This will fit in a rough opening that measures 14-1/4 inches wide x 14-1/4 inches...
    view full answer...
    Image 1 for
  • Recommended Manual Vents For 2001 ShadowMaster Enclosed Trailer
    For your two roof vents on your 2001 ShadowMaster enclosed trailer, I recommend the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White # V2092SP-28. I've attached a video of this installation to help you. I recommend using Sealant # 0160297. You will also want sheet metal screws like # 31071 and wood screws like # 30587. These parts are referenced in the attached installation video.
    view full answer...
  • How to Determine the Correct Outside Range Hood Vent
    When trying to find a replacement for your outside range hood vent the most important measurement is the opening where the exhaust ducting or outlet exits your RV. Each of the outside range hood vents we carry will fit a roughly 10-1/2" wide x 3-3/4" tall rough opening and will require 10 Screws # 31071 and Sealant # 0160297 to install. The Ventline Wall Vents # V2111-13 and # V2111-55 have a 1-3/4" collar, and # V2111-03 has a 5/8" collar.
    view full answer...
  • Replacement Exterior Wall Vent for RV Range
    While we do not have any type of parts lists or database for every year, make and model of trailer because trailer manufacturers do not keep those type of records I can go over each of our exterior wall vents for you to compare and see what might work for you. Each of the exterior wall vents we carry for range hoods will fit 10-1/2" wide x 3-3/4" tall rough openings so please be sure that is the size of the opening you have in your trailer. These exterior wall vents also require 10 screws...
    view full answer...
  • Overall and Mounting Hole Dimensions for Ventline Exterior Wall Vent for RV Range Hood V2111-03
    The dimensions of Ventline Exterior Wall Vent for RV Range Hood # V2111-03 are shown in the linked photo I prepared for you. Mounting hole spacing is also indicated. Overall edge to edge dimensions are 5-1/4 x 11-5/8-inches and the vent fits an RV wall opening of 10-1/4 x 3-1/2-inches. Mounting screws # 31071 and white silicone sealant # 0160297 to complete the installation are sold separately. The sealant can be used as both an adhesive (by placing a narrow bead on the mounting flange...
    view full answer...
    Image 1 for
  • Tips for Installing E-Tracks in an Enclosed Motorcycle Trailer
    The E-Tracks, like # E19148, is 12 gauge steel that is 2.5mm thick. What most people do is to use a piece of wood length wise inside the trailer, mount it to the wall framing (like the studs in a house), and then attach the E-Tracks to it. So you would add 2.5mm to the thickness of the wood and as long as you stay within that range you know it will not be going through the trailer wall. I also recommend that you contact the trailer manufacturer to determine the capacity the walls and...
    view full answer...
  • Replacement Ventline Trailer Vent Damper
    The dimensions of the Ventline Replacement Damper for Ventline RV Range Hoods # BCA0472-00 are 9-7/16- long x 4-1/2-inches wide. Based on your photo this replacement part does not appear to be compatible with the size of your vent opening. You may be better served by a replacement vent assembly like # V2111-55. Part # V2111-55 is designed to fit a rough trailer opening of 10-1/2- wide x 3-3/4-inches tall. I went to our warehouse to measure this item for you. The mounting holes are 1/8-inch...
    view full answer...
    Image 1 for Image 2 for
  • Is Inside Trim Included With Redline 2-Way Pop-Up Roof Vent
    The interior trim garnish is indeed included with the Redline 2-Way Pop-Up Roof Vent, part # RV-626-062-2756. This vent also includes a gasket to help seal the vent and prevent leaks. For installing the vent we also offer either sheet metal screws, part # 31071, or wood screws, part # 30587. If you wish to use a silicone caulk to seal the vent and keep out moisture I recommend part # 0160297.
    view full answer...
  • How to Fix a Leaky Roof Seam on a Travel Trailer
    I do have products to help you seal the roof of your 2004 Fleetwood Taos but none of them will be specific to the trailer. What I recommend doing is further securing the seam using sheet metal screws every 12" or so with part # 31071 and then placing a fair amount of silicone along the entire seam with part # 0160297. The screws are not made of stainless steel but are zinc coated to prevent rust. The silicone sealer is specially made for waterproofing roofing materials and is both EPDM...
    view full answer...
  • Can Redline 2-Way Pop-Up Roof Vent 9106-2756 Be Installed On the Side of a Trailer
    The Redline 2-Way Pop-Up Vent # 9106-2756 is designed as a roof vent. However, you could put it on the side of a trailer if you wanted to. There is no specific instruction manual. You would just cut the appropriate size hole using the vent, or more specifically the garnish, as a template. Then you would use screws like # 31071 and some sealant # 0160297 to mount and seal the vent.
    view full answer...
  • Recommended E-Track Mounting on Aluminum Frame Trailer
    The Zinc Sheet Metal Screw - 8 x 3/4" Indented Hex Washer Head - Hex Slotted Drive # 31071 are a good choice for your wall studs, but not for your 3/4 inch wood floors. The zinc coating on both the E-track # E19148 and the screws will prevent galvanic corrosion from the dissimilar metals of steel and aluminum. For your floors, I recommend using zinc plated screws along with locknuts to secure your bikes using backing plate # e96RR. You can obtain that hardware from your local hardware...
    view full answer...


< Previous
12



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Raymond P
Written by:
Raymond P
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Installed by:
Jeff D
Employee Dustin K
Video Edited:
Dustin K
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.