Roadmaster Direct-Connect Base Plate Kit - Removable Arms

See what our Experts say about this Roadmaster Base Plates

• Base Plate Recommendation for 2016 Chevy Silverado 1500
  In regards to the question about leaving the tow hooks on, the base plate brackets fit into the slots where the tow hooks are on your 2016 Chevy Silverado 1500 so they would need to be removed. The difference between the Roadmaster MX # RM-3176-3 and Roadmaster XL # RM-3176-1 is that the XL is compatible with quick disconnects and all Roadmaster tow bars while the MX will work only with the Roadmaster tow bars that slide into a trailer hitch and the EZ Hook safety cables included with Roadmaster's...
  view full answer...
  
• How To Get Replacement Arms For Roadmaster Baseplates
  To get replacement arms for your Roadmaster Crossbar-Style Base Plate Kit # RM-3176-1 you would need to fill out the attached form below for # RM-ARMS and send it to Roadmaster in order to get replacements. You could also ask them about swapping the arms to direct-connect like the # RM-3176-3 as well.
  view full answer...
• Why Is Negative Battery Cable Removed to Flat Tow 2016 Chevy Silverado 1500
  According to the owner's manual, 4x4 Silverado 1500 models with a 2 speed transfer case (Neutral and 4WD LOW) are the only Silverado models that can be flat towed. The owner's manual doesn't directly address why the negative battery terminal needs to be removed, just that it does. In the GM Technical Service Bulletin 13-00-89-007 (you can Google it), it's specifically mentioned that failure to 'depower' the electrical system by removing the negative battery cable can damage the steering...
  view full answer...
• Recommended Direct Connect Base Plate Kit For 2018 Chevrolet Silverado 1500
  I reached out to Roadmaster and unfortunately you can't purchase only the female end of the baseplate that attaches to the frame of your 2018 Chevrolet Silverado 1500. The only way to get the female end is with the Roadmaster Direct-Connect Base Plate Kit # RM-3176-3 that you were looking at. This base plate kit will work great on your Silverado and allow you to keep using your Falcon 2 Tow Bar # RM-520.
  view full answer...
• Alternatives to a Complete Flat Towing Setup to Transport 2016 Chevy Silverado 2WD
  Flat towing a vehicle behind another vehicle requires a few different components, including a tow bar of course, along with matching base plates that will mount on the frame of the vehicle being towed and connect to the tow bar. Some base plates do require drilling and mods to the front fascia. Typically a fully legal and safe flat towing setup also includes a lighting/wiring kit, safety cables and a supplemental braking system for the vehicle being towed. The linked article will explain...
  view full answer...
• Can A 2016 Chevrolet Silverado 1500 4x4 Be Flat Towed?
  Yes, you can absolutely flat tow your 2016 Chevrolet Silverado 1500 4x4. You're going to need a base plate kit, like the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-3176-3, -A set of tow bars, like the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676, -A braking system, like the Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251, -A wiring kit, like the Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154, & -A quick disconnect kit,...
  view full answer...
  
• Parts Needed to Flat Tow a 2017 Chevy Silverado 1500 4x4
  A 2017 Chevrolet Silverado 1500 4x4 can be flat towed behind a motorhome with all four wheels down. In order to do so, you'll need a base plate kit, safety cables, tow bar, tow bar wiring, and braking system. I have attached a list of all these parts below. In regards to the proper procedures for this, you'll need to refer to the steps in your owner's manual on page 437. Roadmaster Direct-Connect Base Plate Kit part # RM-3176-3 Roadmaster Nighthawk All Terrain Tow Bar part # RM-676 Roadmaster...
  view full answer...
• Is the N on the Transfer Case Knob in a 2015 Chevrolet Silverado 1500 for Flat Towing the Truck
  Yes, according to the owners manual for the 2015 Chevrolet Silverado the "N" on the transfer case knob is to shift the transfer case to Neutral for flat towing your Silverado. If you plan to flat tow your 2015 Chevrolet Silverado 1500, I have included the parts needed to do that below. Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit # RM-3176-3 Tow Bar - Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676 (also includes the required safety cables) Tow Bar Wiring -...
  view full answer...
  
• How Does Steering Wheel of 2014 Silverado 1500 Unlock to Flat Tow
  To unlock the steering wheel of your 2014 Chevy Silverado 1500 will require you to put the key in the ACC position and then disconnect the battery's negative terminal. For a base plate kit you'd then want the part # RM-3176-3. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the...
  view full answer...
• Can 2018 Chevy Silverado 1500 4x4 Be Flat Towed Behind Motorhome
  Since the 2018 Chevy Silverado 1500 is 4 wheel drive it is flat towable. We have everything you'd need to flat tow it as well. First you'd need to start with a base plate kit. For that you'd want the Roadmaster Direct Connect kit part # RM-3176-3 which I attached an install video for. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All...
  view full answer...
• Parts Needed to Flat Tow 2014 Chevy Silverado 1500
  We have everything you'll need to safely flat tow your 2014 Chevy Silverado 1500. The first thing you need is a base plate kit like the Roadmaster part # RM-3176-3 which is custom fit for your truck and is easy to use. I attached an install video for more info on it as well. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522....
  view full answer...
• Recommended Parts to Flat Tow 2018 Chevy Silverado 1500
  In order to flat tow your 2018 Chevy Silverado 1500 you will need a base plate kit, a tow bar, safety cables, a lighting solution, a supplemental braking system, and likely a high-low adapter. Starting with the base plates I recommend the Roadmaster MX Base Plate Kit # RM-3176-3. These are designed specifically for heavy-duty applications like your Silverado and they feature a hidden bracket design that maintains a clean look on your truck when you aren't towing it. I have attached an...
  view full answer...
• Parts Needed to Flat Tow a 2014-2018 Chevrolet Silverado 1500 Behind a Motorhome
  In order to flat-tow a 2014-2018 Chevrolet Silverado 1500 with all four wheels on the ground behind a motorhome you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and possibly a high-low adapter. There may also be a few other smaller components that are needed depending on options the vehicle is equipped with. For a tow bar, I recommend the Roadmaster Nighthawk All Terrain Tow Bar part # RM-676. The Nighthawk is one of...
  view full answer...
• Parts Needed to Flat Tow a 2016 Chevy Silverado 1500
  For lighting for your 2016 Chevy Silverado 1500 you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV. I attached an install video that shows a similar diode kit being...
  view full answer...
• Parts Needed to Flat Tow 2017 Chevy Silverado 1500
  For your 2017 Chevy Silverado 1500 4WD you would want the Roadmaster Base Plate kit part # RM-3176-3 which is a confirmed fit and would work well with your Blackhawk tow bar # RM-422. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight...
  view full answer...
• Recommended Flat Towing Setup for 6 Inch Lifted 2015 Chevy Silverado 1500 LT 4x4
  For your 2015 Silverado 1500 LT 4x4, the lift won't be an issue but you will need to use a high-low adapter. I've linked the page to your options and an article for measuring to ensure correct fit. For your setup, I recommend starting with the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-3176-3. The Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 10K # RM-422 is my recommendation to go along with that base plate kit and you will...
  view full answer...
• Flat Towing A 2014 Chevrolet Silverado 1500
  For your 2014 Chevy Silverado you'll need to flat tow because there isn't a dolly that can handle the size and weight of your truck. To Flat tow you'll need the following items: Baseplate: I recommend the Roadmaster Direct-Connect Base Plate Kit - Removable Arms Item # RM-3176-3 Tow Bar: I recommend the Roadmaster Falcon 2 Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs Item # RM-520 which will match perfectly with the baseplates. Tow Bar Wiring: I recommend the Roadmaster Universal...
  view full answer...
• Recommended Flat Towing System for 2018 Chevy Silverado 1500 and Blue Ox Tow Bar
  It looks like you simply have an older style Blue Ox tow bar from your photo. You will simply need to make sure it is rated for the weight of your truck and that capacity should be listed on one of the stickers. You already have the safety cables and a high-low adapter, so there are a few components you need for your 2018 Chevy Silverado 1500. I recommend using the Blue Ox Base Plate Kit - Removable Arms # BO94FR which will work well with your tow bar. For your wiring, I recommend the...
  view full answer...
  
• Recommended Flat Towing Equipment For A 2015 Chevy Silverado 1500 Z71 4x4
  To flat tow your 2015 Chevy Silverado 1500 Z71 4x4 you'll need a tow bar, base plate, tow bar wiring kit, breaking system, and safety cables. I have the following recommendations for you: Tow Bar: Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Light # RM-676. This tow bar features non-binding latches and a large hookup radius to make connecting and disconnecting on any terrain a breeze. It also includes a 6-way to 7-way adapter cable and 6-way socket as well as safety cables....
  view full answer...
• Recommended Flat Towing System For 2016 Chevy Silverado 1500 4x4
  For your 2016 Chevy Silverado 1500 4x4, I have the parts you need to make flat towing easy. I recommend you start with the Roadmaster MX Base Plate Kit - Removable Arms # RM-3176-3 and use the Roadmaster Falcon 2 Tow Bar # RM-520. You will also need the safety cables # RM-645. For your wiring, I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 which will give you a clean connection at the front of your truck and allow you to use the factory wiring without...
  view full answer...
• Roadmaster Base Plate Kit that Fits 2022 Chevy Silverado 1500
  Roadmaster does offer a base plate kit that fits your 2022 Chevy Silverado 1500 with the part # RM86MR. The kit you referenced fits older Chevy trucks. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect. For lighting/safety cables, locks,...
  view full answer...
• Recommended Complete Flat Towing System for a 2016-2018 Chevy Silverado 1500
  For your 2016-2018 Chevy Silverado, lets start your flat towing set-up with base plates. I recommend the Roadmaster MX Base Plate Kit - Removable Arms # RM-3176-3 which is compatible with all Roadmaster tow bars. I recommend using the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights # RM-676 to give you the wiring connection, safety cables, and even LED lights for visibility. You may want to add a hitch lock like # e98880 to secure your investment and use a cover like...
  view full answer...
• Complete Flat Towing Set Up for 2018 Chevy Silverado 1500
  There are a number of parts needed in order to flat tow your 2018 Chevy Silverado 1500; I will list the parts for you below. - Base Plate Kit: Roadmaster MX Base Plate Kit # RM-3176-3 - Tow Bar: Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522 - Safety Chains: RoadMaster 68" Single Hook, Coiled Safety Cables # RM-643 - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 - Battery Disconnect: Roadmaster Automatic Battery Disconnect with Switch # RM-766 -...
  view full answer...
  
• Parts Needed to Flat Tow 2017 Chevy Silverado 1500 with 4WD
  We can definitely help put together a list of parts that will allow you to transfer most of them at least partially to a new vehicle at some point. You will want to consult your owner's manual as well and follow any vehicle specific instructions before flat towing. Starting with a baseplate for your 2017 Chevy Silverado 1500, I recommend using the Roadmaster MX Base Plate Kit - Removable Arms # RM-3176-3. This base plate kit has removable arms to give you a clean front end when you're...
  view full answer...

Do you have a question about this Base Plate?