Replacement Ceiling Garnish for Redline 2-Way Pop-Up Roof Vent - Black
(34 reviews)
Price: $17.07
In Stock
Replacement Ceiling Garnish for Redline 2-Way Pop-Up Roof Vent - Black
Item # 2756
Our Price: $17.07
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (34)
- Q & A (0)
- Videos (1)
- Photos
Redline Accessories and Parts - 2756
- RV Vents and Fans
- Roof Vent
- Ceiling Garnish
- Redline
- MaxxAir II
Installed with your Redline 2-way pop-up roof vent, this custom-fit plastic interior trim piece will improve the finished appearance of your trailer's interior. This garnish piece hides the cut in your roof. Black color.
Features:
- Improves the appearance of your Redline 2-way pop-up roof vent in your trailer's interior
- Installs inside your trailer
- Slides into vent - adjusts to fit the thickness of your roof
- Hides rough-cut installation hole
- Trims easily to fit thin roofs
Specs:
- Rough opening size: 11-1/8" long x 5-1/2" wide
- Overall dimensions: 14-1/8" long x 8-1/2" wide
- Leg length: 2"
- Rounded radius corner
- Color: black
- This piece has no pre-drilled mounting holes
2756 Redline Replacement Ceiling Garnish for 2-Way Pop-Up Roof Vent - Black
Video of Replacement Ceiling Garnish for Redline 2-Way Pop-Up Roof Vent - Black
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redline RV Vents and Fans 2756 Review
Rate your transcript OrderClientKevin BrossRef #20678Order #TC0195725976 Today we'll be reviewing part number 2756. This is Redline's replacement ceiling garnish for the Redline 2-way pop up roof vent. It's a nice black color. This is going to improve the appearance of your Redline 2-way pop up roof vent and your trailer's interior. It's going to install inside the trailer. The ring that goes around the bottom here slides into the vent.
Then you could adjust it to fit the thickness of your roof. If you have a thinner roof, you can easily trim that piece to accommodate that as well. This is designed to hide the rough cut installation hole. We'll measure the opening size. It's going to give us about 11 and 1/8 by 5 and a half. If we take a measurement of the overall dimensions, measuring from edge to edge, it's going to give us a measurement about 14 and 1/8 by 8 and a half.
The leg length, which is this portion here that's going to slide into the vent, that's going to give us a measurement of 2 inches. Then, the flange that goes around the garnish going to give us a measurement of about an inch and a quarter. It's got the rounded radius corners. That's nice to have. It's in a nice black color. This piece has no pre-drilled mounting holes.
That's going to do it for today's review of part number 2756. This is Redline's replacement ceiling garnish for the Redline 2-way pop up roof vent. .
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Replacement Ceiling Garnish for Redline 2-Way Pop-Up Roof Vent - Black - 2756
Average Customer Rating: 4.8 out of 5 stars (34 Customer Reviews)
Installed with your Redline 2-way pop-up roof vent, this custom-fit plastic interior trim piece will improve the finished appearance of your trailer's interior. This garnish piece hides the cut in your roof. Black color.by: Art S08/10/2018
The Trim Garnish fit perfectly on the roof vent in my Wells Cargo utility trailer. See picture attached. Most importantly is the service I received from E-Trailer. The first unit I received was defective, but E-Trailer immediately replaced it. Sure, there are lots of places on the Web to buy stuff, but there is no place like E-Trailer for service, support, and great informative installation videos. I refuse to buy my trailer and truck accessories anywhere else!!
by: Jackson1PA 07/23/2019
Product exactly as described online. Installed in my a 98 featherlite bumper pull after I decided to insulate the horse area ceiling. Added the finishing touch to the install. Still have some work to do on the side walls but very happy with how the product looks!!!
by: Melvin05/01/2016
Works nicely with the popup vent. Glad I order it.
Slem
5/1/2017
Works well in all weather. Convenient and smart ventilation. Considering placing a second popup vent in the van floor to generate air cross flow.
by: David Brown08/19/2016
Received parts an installed them not too hard to install made a lot of difference inside of my trailer i really like the way they make my trailer look. Inside &outside. I think i'm going to enjoy them for years to come. A well made &reasonable. Product
by: Michael04/22/2023
Modified this to use on my side by side to let air in the cabin on hot days. Works perfect!
by: Floyd03/27/2023
Very quick and efficient prices are lower than my other suppliers.
by: Darwin 09/17/2019
Should of bought ...WITH ... vent ... for topper ...
.. but well made , to finish job ...just wish the holes were marked ..
... need and going to Order ( 2 ) more with trim rings ,for car trailer ...
..... thanks ... e-trailer ....
by: Charlotte 08/24/2016
Excellent customer service. Product arrived on time. Loved the ability to track the order. Product is exactly what we wanted and well made. We insulated the roof in the horse area of our trailer and the pop up vent garnishments provided a perfect finish. THANKS Pat!
by: johnny02/11/2013
this product was just what i wanted. inside trim for a pop up vent. it fits just fine and was priced right. service from this company is excellent. i've had two purchases and am very satisfied with the products and service.
by: James 05/10/2020
My order was shipped in a timely manner. Unfortunately one of the trim pieces arrived broken. I contacted them and they sent me a new one right away. Very good customer service. I would order from them again without hesitation.
Jim
by: Marcy01/04/2023
Worked and fit perfectly! Would also like to add that Donna was amazing! She was so helpful and understood my urgency in receiving this item.
by: Dennis T.05/07/2015
Had to trim this piece to conform with the roof thickness, but that was easy using a drill press and a cut off wheel attachment. Then I just glued it in.
by: Mike C02/09/2020
As a trim molding, it fits well, and has a factory installed appearance.
by: Amy R07/23/2015
Great product, fit perfect in our trailer, fast shipping also!
by: Dan H.07/25/2014
Nice thick flat plastic that gives the inside of the vent a nice finished look.
by: Trailer Nut06/26/2016
etrailer had just what was needed, when it came to finding a certain part! Shipped super fast which was helpful.
by: Walt D06/24/2015
Excellent service. Part arrived on time and was
exactly as ordered. Will use etrailer again
by: Miriam02/14/2017
Nice product works great. Shipped same day I ordered it.
Miriam
2/14/2018
These vents have worked great for our trailer. Very nice to be able to control the ventilation for my horses and mules.
by: Ken S.09/15/2020
Purchased 2 of these to prevent condensation inside canopy when truck camping.
They were just as advertised and work well. Pleased with purchase.
by: B hall04/14/2016
Great product great price great company
by: Dick02/19/2018
Easy to install and looks fine.
by: Frank 07/07/2022
Nice clean finish to a great vent.
by: Bubba S07/13/2015
No problems will order again Thank You Dana for your help
by: Stephen 02/19/2024
25
34
Show More Reviews
See what our Experts say about this Redline Accessories and Parts
- Can A RV Roof Vent Be Installed On The Side Of A TrailerAbsolutely! With that being said most of the roof vents like the MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-04500K are not designed to be installed on the side of your trailer, and may leak if not installed on the roof. Instead I recommend the Replacement Exterior Pop-Up Roof Vent # 9106 which can be installed on the side of your trailer as you can see in the included picture. You will need 12 mounting screws like # 31071, and Silicone # 0160297 to secure the vent...
view full answer...
- Can The Exterior Pop-Up Roof Vent Be Used In The Open Position To Pressurize Trailer Interior? I have seen both the Steel # 9106 and Aluminum # RV-626-062 Pop-Up Vents used in a open position to allow the air to blow into the trailer while driving. While I do not see the manufacturer having any kind of speed rating on these I would be hesitant to the speed or having them opening forward depending on the material you are mounting it to. Since some trailers only use fiberglass shells I would not find that material secure enough to hold the vent open while driving. But if you have a...
view full answer... - Screw Recommendation for Installing Trailer Roof Vent # 9106The recommended screws for installing the part # 9106 that you referenced is the # 31071. This would work well on a sheet metal trailer wall/roof. The garnish part # 2756 would then fit over them just fine.
view full answer... - Color Availability for the Replacement Ceiling Garnish # 2756 The Replacement Ceiling Garnish # 2756 only comes in black but could be easily painted any color to match the interior of your trailer.
view full answer... - Will Ceiling Garnish # 2756 Work with Pop Up Roof Vent # RV-626-062Yes, the pop up roof vent garnish part # 2756 that you referenced does work with the pop up roof vent part # RV-626-062 that you referenced.
view full answer... - Depth of the Redline Garnish part # 2756The leg length or the depth that the garnish part # 2756 has is right at 2 inches. From the picture you submitted it looks like you installed the roof vent part # 9106 with the mounting flange on the inside of the trailer. The vent should be installed with the mounting flange on the outside of the trailer and then use the garnish to cover up the opening you cut. In that configuration the garnish would conceal the hole you cut and the rivets. It can also be trimmed shorter if needed.
view full answer...
- Availability of Redline Pop-Up Roof Vent # 9106-2756 in Sliver FinishThe roof vent you mentioned is available in an aluminum finish as part # RV-626-062. The vent includes the screen and the gasket. The garnish, which is not included is part # 2756.
view full answer... - Replacement Vent for Sidewall of Toy HaulerAlthough the # 9106 vent is primarily designed for use on the roof of a trailer, there's no reason why it couldn't be used on the sidewall. The vent is designed for a 11-1/8" long x 5-1/2" wide rough opening, so if the opening on your trailer wall is similarly sized, the vent would work well for you. An interior trim piece, part # 2756 is also available.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
Raymond P
Updated by:
Adele M
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jackson1pa
7/24/2020
Excellent, I’ve had no issues with this part.