THIS ITEM IS NOT A FIT FOR
2019 Ford F-250 Super Duty
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118698
Retail:$141.03
Our Price: $78.40
You Save: 44%
2019 Ford F-250 Super Duty
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (122)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118698
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points behind tail lights
- Plug in T-connector
- Connect hot lead to battery
- Includes ModuLite power converter to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 4.2 amps per circuit
- Tail lights: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located in your rear cargo area, behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies and some interior paneling to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because your vehicle runs on a multiplex wiring system, the wiring needs to be converted to be compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118698 Tekonsha T-1 T-Connector - 4 Wire - Modu-Lite Converter Included
Installation Details
This Product Fits The Following Vehicles
- 2017 - 2022 Kia Sportage
- 2017 - 2022 Kia Sportage
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Defective
- etrailer mistake
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118698
Average Customer Rating: 4.7 out of 5 stars (122 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.by: Ed02/12/2024
The kit had everything I needed, and installation was easy.
by: Azad07/20/2018
2017 Kia Sportage
Perfect fit. Just not give 5 stars as it’s quite “annoying” to instal:
1) removing the taillight is a PITA! Even removing two screws light did not get off! Broke after so much trying. The pressure pins that hold it are very strong and no much place to grab
2) Wiring the power from battery to the back is a hassle! And I’m an experienced mechanic! Took me about 45 minutes to find a way to route the wire (from inside the vehicle as from under will for sure not safe)
by: Larry S05/29/2022
2022 Kia Sportage
Very easy instillation, the video helped very much. I didn't have a lift so used ramps to lift the car, even though no lift I installed the wiring harness in 1 and a half hours. I"am impressed with the etrailer team and the quality of their products. I will be back for sure very happy customer here
by: Roger03/26/2020
Kia Sportage
Good price.
Fast shipping.
Perfect fit (2017 Kia Sportage LX)
Hitch installation (2 people/ vehicle lift) - less than 20 min.
Wiring harness (Tekonsha T-one) - time consuming but not difficult - 90 min.
Very pleased with this product.
Thanks much.
by: Nancy A05/01/2024
It was exactly what my husband wanted
by: Easy Installation07/26/2020
Easy installation without having to splice any wires or use a test probe and try to guess which wire is for what just unplug existing vehicle wires and plug in most of the time spent was disassembling the vehicle panels to get to the connectors the video is a huge help I watched it on my phone all along and paused at each step it was very helpful would not want to try without it I highly recommended
by: Cliff02/10/2023
Hookup was easy and straight forward. The 4 wire for the trailer is made to be mounted outside but I saw no mention of an additional bracket needed when I ordered the kit. I would have liked another 2 foot of wire to keep that corrosion sensitive inside the car, next to the spare tire.
Jenny N.
2/21/2023
You are right in that adding on mounting bracket will be useful since the harness is stored outside the vehicle. I have one that I like recommend, part # C58001, which attaches to the hitch receiver to mount the plug next to it. That way it is right there whenever you need to use it. And it can be protected against corrosion by using dielectric grease part # LT37534. The harness also comes with a dust cap to cover the 4 way when not in use.
by: Scott m08/08/2019
Was easy to put in and the plug in wiring was a snap. Very happy with the purchase. Now I can bring my daughter to college with out having to bring 3 or 4 cars.
by: Von 05/26/2023
Great trailer hook up !
by: Ryan02/05/2023
Every car i have bought a harness for has been a perfect fit and really easy to install following their videos.
by: Anna 08/26/2023
It was perfect for my car and works gre at…
by: Leo S.06/11/2017
2017 Kia Sportage
I like the T- 1 Vehicle wiring harness Iplan to use it to pull my trailer , I like the way itplug,s in so I dont have to splice nothing
Leo S.
6/11/2018
it is working fine thank you so much.
by: Steven 01/14/2023
Instructions easy to flow nice pictures showing how things look also video was great,just what the video mentioned running the power wire so-so just more timing consuming
by: Willie 02/11/2023
2021 Kia Sportage
I received my order in 2 days which was awesome!! The sue provided everything I need including an installation video which was very well done!! Thank you!
by: Steve G.10/21/2019
I installed this hitch twice, first on a ne car that got totaled when a fellow drove into the side of it in a parking lot, The second hitch went on the same model replacement car.
Both times, the hitch, for a KIA Sportage, needed a delicate tap with a 12 pound sledge hammer to spread the mounting flanges before it would slide onto the frame. No big deal, otherwise the hitch is great, ordering was simple, and the customer service was excellent.
by: Jason02/13/2019
2019 Kia Sportage
I ordered this for my SUV so I could hookup a trailer. Shipping was fast and I received in 4 days. I am not a mechanic by any means, with that being said, bought some car ramps and installed the hitch receiver (Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 76074). I also installed the wiring (T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118698). Took about 4.5 hours but overall look the look and feel. Everything went together great. I watch the video beforehand. I would highly recommend these products.
by: Jason02/13/2019
I ordered this for my SUV so I could hookup a trailer. Shipping was fast and I received in 4 days. I am not a mechanic by any means, with that being said, bought some car ramps and installed the hitch receiver (Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 76074). I also installed the wiring (T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118698). Took about 4.5 hours but overall look the look and feel. Everything went together great. I watch the video beforehand. I would highly recommend these products.
by: Gerald C.07/06/2020
Great kit. Instructions were clear and easy to follow. Installed myself in about hour. Never an issue. My trailer lights work every time. The only additional thing I do is apply a thin coat of diaelectric grease to the contacts to avoid water related corrosion. Absolutely no complaints with this kit. Works exactly as designed.
by: Michael 10/19/2021
I like this product. I was able to install this wiring harness in about an hour. Only thing that took me a little bit of time was running the harness where the brake light is attached to the fender well. It was a booger running that line up, but not something I couldn't do. Took a few minutes to run the black power line from the rear of the car to the battery under the hood, but again, wasn't something overly difficult to do. Just time consuming I suppose. As for the harness itself, it's well made and the connectors snap in precisely. I recommend. Just follow the online video instructions. Easy enough.
by: MrJAR05/28/2017
2017 Kia Sportage
Well made with quality wires and parts. Install was straight forward and simple. Hardest part was getting the tail light housing off without breakage.
Mrjar
5/28/2018
Works great, no issues.
by: Scott 01/04/2023
2022 Kia Sportage
This company is easy to work with and the hitch came a day early.A1operation
by: Tod C.09/02/2017
2017 Kia Sportage
Complete wiring kit that fit perfectly and had easy to follow directions
Tod C.
9/2/2018
Wiring harness continues to work fine after a year.
by: John 07/17/2022
2023 Kia Sportage
Excellent product! Very easy to find natal and fit perfectly. Etrailer is the place to get all my part’s! This was my 4th harness and my 3rd hitch! NEVER an issue! Well Done!!
by: Timothy G03/12/2019
Would love to give this 5 stars but first this, the wiring, parts, directions, ease of installation, videos and everything was EXCELLENT. However, the length of wire for the trailer connector, from even the closest placement possible (I moved it twice, as close to the hitch as possible while staying inside the wheel well) is just long enough. NO SLACK AT ALL. Needs to be about 8-12 inches longer.
by: Chris 07/21/2022
Love how the paperwork shows the actual vehicle the components are designed for!
I’ve purchased from etrailer before and will continue to do so!
This time they even included a circuit tester!
25
122
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Hitch Fit for 2021 Kia Sportage SX TurboAccording to Curt, their # C13281 is compatible with all models of the 2021 Kia Sportage, including the SX Turbo model. If you'll be towing with the hitch, you'll also need a trailer wiring harness like # 118698, a ball mount like # 2753 and a trailer ball like # 19260 for a 1-7/8 or # 63845 for a 2 inch ball. I've linked to a product install video for the hitch and the trailer wiring harness, as well as to the installation instructions.
view full answer... - Are There Any Replacement Parts for the Curt T-Connector Wiring for a 2017 Kia SportageIf the powered module that comes on the Curt T-Connector # C56321 shorted out and now your trailer lights are staying on constantly then you will need to replace your wiring kit as there are no replacement circuit boards or modules. You can however use the Curt Upgraded Circuit Protected Powered Tail Light Converter # C56496 and just splice it in behind the converter box. If you'd rather go with a whole new kit then I recommend using the Tekonsha T-One # 118698 because we have found the...
view full answer... - Parts Needed to Add 7-Way for Towing Tear Trailer With 2018 Kia SportageTo add a 7-Way to your 2018 Kia Sportage you'll need to start off with a 4-Way flat which carries the basic trailer light functions. For that I recommend the Tekonsha T-One # 118698 simply because we have found the T-One harnesses to be the best. This tees in behind your tail lights and then draws power straight from your battery to power the trailer lights. The next step is to add the 7-Way wiring to the 4-Way flat. The kit you need for this will depend on what type of brake controller...
view full answer... - Trailer Hitch Receiver and Wiring Harness For a 2021 Kia Sportage For your front wheel drive 2021 Kia Sportage you will need to use the Curt Trailer Hitch Receiver # C13281. This receiver is custom fit to your Sportage with no modifications needed as seen in our installation video that I have linked below. The etrailer Trailer Hitch Receiver # e98841 that you found fits certain model years of the Hyundai Santa Fe Sport and some Kia Sorento's, but will not fit your Sportage. I recommend installing the T-One Vehicle Wiring Harness # 118698 when you...
view full answer... - Recommended Trailer Hitch Receiver For 2021 Kia Sportage LXWhen installing the etrailer Hitch Receiver # e72TR on your 2021 Kia Sportage LX you will not need to trim any of the underbody panels. You will just need to remove one underbody panel on the driver side and not re install it. The Curt # C13281 you were looking at allows you to re install that underbody trim panel so I recommend going with that hitch instead. If you are planning on towing with your Sportage you will also need a vehicle wiring harness # 118698 which will plug into the...
view full answer... - Best Wiring and Brake Controller for 2021 Kia SportageThe first thing you need to do is add a 4-way to your 2021 Kia Sportage. I recommend the Tekonsha # 118698 since we have found Tekonsha to be the most reliable when it comes to wiring. Once this is installed you will need the Universal Installation Kit for Trailer Brake Controller # ETBC7. This kit comes with the adapter, wiring, and everything else you need to add a 7-way to your vehicle so you can power your brakes and use a brake controller. For a brake controller, I recommend the Redarc...
view full answer... - Trailer Hitch Receiver for 2021 Kia Sportage Towing and CarrierYour 2021 Kia Sportage LX is capable of towing 1,653 lbs with a maximum tongue rating of 200lbs. The Curt Trailer Hitch Receiver # C13281 is the one I would recommend for you. The 2" receiver that this hitch has will give you a wider variety of options for ball mounts and drops. It also does not hang down as low as the etrailer # e72TR, this will limit the chance of dragging on tall curbs. For the Tekonsha Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118698. It uses a powered...
view full answer... - Will The Tekonsha 4-Way Wiring Harness From a 2017 Kia Sportage Fit The 2022 Kia Sportage?Yes, the Tekonsha T-One Vehicle Wiring Harness # 118698 from your 2017 Kia Sportage can be used on new 2022 Kia Sportage. The 2017 was the first year of the redesigned Sportage that is still under production. That is why the etrailer Hitch Receiver # e72TR will also fit your new Sportage. I do recommend ordering a Replacement Hardware Kit # RHK for your receiver as the bolts are a one time use fastener and should not be reused. You may also need new 12 Gauge Wire # 12-1-1 (sold per...
view full answer... - Trailer Hitch and Wiring for a 2018 Kia Sportage SX Turbo 2.0LYes, the etrailer hitch # e72TR does fit the SX Turbo models of the 2018 Kia Sportage. I I linked a video that shows when we installed it recently so you can see the process. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not...
view full answer... - Which Trailer Hitch Recommended for 2021 Kia SportageBecause it has a slightly higher tongue weight capacity than the Curt # C13281, I'd recommend going with the Draw-Tite Class III hitch, part # 76074. The Draw-Tite hitch has a 675 lb tongue weight capacity which makes it the perfect choice for carrying a bike rack or other hitch mounted accessory like a # C18151 cargo carrier. For a trailer wiring harness, I'd recommend the # 118698 trailer wiring harness, a ball mount like part # 2753 and for a trailer ball, use # 19261 for a 1-7/8 inch...
view full answer... - Trailer Wiring Harness for a 2017 Kia SportageFor your 2017 Kia Sportage you can use Tekonsha trailer wiring harness # 118698. It is designed to fit the 2017 to 2018 Kia Sportage. I have included a link to a video showing an example installation for you. I recommend the Tekonsha wiring harnesses more than others because they work well and are more reliable.
view full answer... - Hitch and Wiring Harness Recommendation for a 2017 Kia Sportage SX GDIThe etrailer hitch part # e72TR is the correct hitch for the 2017 Kia Sportage. We did install this hitch on a 2018 Kia Sportage SX GDI so it's confirmed to fit your Sportage. I recommend Tekonsha part # 118698 for trailer wiring. The Tekonsha wiring harness is a t-connector that plugs in behind the driver's side and passenger's-side tail lights. It does not require splicing but does require a power wire that connects to the battery. The power wire powers the Modulite converter that is...
view full answer... - Recommended Trailer Wiring Harness for 2017 Kia Sportage The available 4-Way trailer wiring harnesses that are confirmed to fit your 2017 Kia Sportage will all essentially install in the same manner. When installing a harness like the Tekonsha T-One # 118698, you will simply plug the mentioned connectors to existing ports that are located behind the driver side tail light and under the vehicle on the driver side. After the T-connector is installed, you will then need to run the hot lead up to the vehicle's battery and connect it to the positive...
view full answer... - Comparing Curt and etrailer Hitches for 2018 Kia SportageFor your 2018 Kia Sportage the etrailer hitch part # e72TR and the Curt hitch part # C13281 are pretty similar but have some distinct differences. The Draw Tite is what I'd recommend for two reasons. If you plan to carry a bike rack or a cargo carrier the etrailer doesn't require you to use a stabilizer strap like the part # 18050 which the Curt does. Both hitches will be mostly concealed as they crosstube isn't visible and have great towing capacities. I attached a picture that points...
view full answer...
- Difference Between Curt and etrailer Class III Trailer Hitches for 2022 Kia SportageThere are a few small differences between the etrailer # e72TR and the Curt # C13281 Class III hitches, both of which are confirmed fits for a 2022 Kia Sportage. Both hitches would install in a similar manner, and the installation shares the same level of difficulty. The etrailer has a higher capacity at 4500 lbs towing/675 lbs tongue weight while the Curt has a 3500 lb towing/525 lb tongue weight capacity. However, the capacity advantage isn't really relevant because the capacity will...
view full answer...
- Does Tekonsha T-One Wiring from 2017 Kia Sportage Fit a 2020 Kia SportageGreat question! Yes, the T-One Vehicle Wiring Harness # 118698 is compatible with your 2020 Kia Sportage. This kit fits a 2017-2020 Sportage so you're good to go. In all honesty if you checked a month or so ago it could very well have not been listed as a fit yet. Since your 2020 is a newer vehicle sometimes they are still figuring out what wiring fits what vehicle so Tekonsha may have just recently confirmed that the 118698 actually fits the 2020 model. If you don't already have a trailer...
view full answer... - Best Hitch and Trailer Wiring Option for 2022 Kia SportageHi, we have just what you need for your bike rack and new 2022 Kia Sportage. I recommend the Curt Trailer Hitch Receiver, # C13281 and the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, # 118698 along with the Mounting Bracket 4-Pole Flat, # 18144. I have linked below some product review and installation videos of each of these items to assist you with installing. It is really easy to do with a few hand tools. For a ball mount, use part number # 2753 along with either,...
view full answer... - Choosing Between etrailer e72TR and Curt C13281 Class III Hitches for 2017 Kia SportageThe # C13281 and # e72TR Class III hitches are the exact same hitch, both are manufactured by Curt. The etrailer brand hitch has a matte powder coated finish, while the powder coat on the Curt hitch has a glossy finish. Some feel that the matte finish is a bit more desirable, as it tends to match the black underside of the bumper cover on the 2017 Sportage better which makes the hitch a little less visually obtrusive, but other than that (and the brand sticker affixed to it) the hitches...
view full answer... - Can You Connect the Thinline LED Trailer Tail Light Red Wire to both Green and Yellow WireI believe what my friend Rob was referring to when he said to connect the red wire from your Thinline LED Trailer Tail Light # STL59RB to the yellow and green wires is to connect it to the yellow and green wires of the Hopkins Wiring Harness with 4-Pole Flat Trailer Connector # HM38138. From there you can plug the Hopkins connector into your vehicle wiring harness for power if you are using this on a cargo carrier or other hitch mounted accessory. This process will not harm your vehicle...
view full answer... - Recommended Trailer Hitch for 2018 Kia SportageYes. The Curt Trailer Hitch Receiver # C13281 is a confirmed fit for your 2018 Kia Sportage SX. It is a confirmed fit for all trim models. I've attached a video of this installation for you. If you will be using this hitch for an accessory like a bike rack, Curt's warranty also requires the support strap # 18050. If you will be towing with this hitch, I recommend the wiring harness # 118698. This T-One connector will mate with your factory harness behind the tail lights on each...
view full answer... - Hitch and Wiring Harness for a 2020 Kia SportageYes, we do have a trailer hitch for your 2020 Kia Sportage. It is the etrailer Hitch Receiver item # e72TR. This hitch is custom fit and bolts to your Kia with included hardware. I have linked an installation video below. You are going to need two separate wiring harnesses to add a 7-way connector to your vehicle that will allow you to control your trailer's brakes. The first is the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118698. This custom-fit...
view full answer... - Trailer Wiring Recommendation for 2017 Kia SportageYou are on the right track! The last thing you need is wiring so that your 2017 Kia Sportage can control the taillights of the trailer. For that you'd want the Tekonsha wiring kit part # 118698. I recommend this kit for your vehicle because it will install without requiring splicing into the vehicle wiring and because it has the most reliable converter box of all of the kits we offer. This will work great with the Curt hitch # C13281 you have and the Reese ball mount and hitch ball you...
view full answer... - Recommended Trailer Hitch Receiver For 2021 Kia SportageFor your 2021 Kia Sportage I recommend the etrailer Hitch Receiver # e72TR due to it having a 2" receiver giving you the most options for accessories, but also due to its 675lb tongue weight rating and 4500lb trailer weight rating which is the highest ratings out of all of the trailer hitch receivers offered for your vehicle. If you are planning on towing with your Sportage you will also need a trailer wiring harness # 118698, and a ball mount, hitch ball, and hitch pin and clip which...
view full answer... - Trailer Wiring For 2019 Kia Sportage LX and How To Install ItWe do have plug and play wiring for a 2019 Kia Sportage LX part # 118698. This Tekonsha 4-pole flat wiring harness fits all models of the 2019 Sportage and easily plugs into your vehicle's wiring harness which is located in the rear cargo area behind the driver's side and passenger's side tail lights. The black wire does need to be attached to the positive side of the battery to provide power to the modulite converter which protects your vehicle's electrical system. The connections behind...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Video by:
Andrew K
Video by:
Joshua S
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Jacob T
Video Edited:
Chris R
Video Edited:
John S
Updated by:
Wilson B
Updated by:
Isabelle B
Written by:
Alexander C
Test Fit:
Robert C
Test Fit:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mike L.
7/21/2018
Its perfectly acceptable to run the wire under the vehicle, as long as you avoid anything thats hot or moving, like exhaust, steering and suspension components. If necessary, wire loom like part # 7509-1 which is sold by the foot can be used to provide additional protection to the wire.
Helpful Links
Tools/Spectro/7509-1.html