T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(93 reviews)
Price: $56.92
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118669
Retail:$113.56
Our Price: $56.92
You Save: 50%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (93)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118669
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points behind tail lights
- Plug in T-connector
- Run hot lead to car battery
- Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 4.2 amps per circuit
- Tail lights: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118669 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite
Installation Details
This Product Fits The Following Vehicles
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Defective
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118669
Average Customer Rating: 4.7 out of 5 stars (93 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.by: Larry03/17/2018
2015 Ford Edge
I'm a pretty good DIY person, so when I saw a plug and play installation of trailer wiring specifically made for my Ford Edge, I couldn't believe it. Just in case you don't want to cut, splice, heat-shrink the factory light wiring circuit you can plug T connector in and install taillight back in place.
The hardest part of this installation is the module power wire that has to be run from the rear bumper to the vehicle battery. Note: if you plan on making your vehicle a towable behind an RV like me, you should run both the 12V power wire and your toad trailering lights together saves having to install later.
by: John04/13/2022
2015 Ford Edge
Obviously the item I received was used return but charged full price,hopefully etrailer will make this right
by: Justin R.06/22/2017
Ford Edge
Got it yesterday, had it installed this morning.. looks great.. I am now an etrailer.com fan and will be coming here for any vehicle need I have moving forward!
by: Kip C05/29/2018
2016 Ford Edge
Lightning Fast Shipping. The online video made the installation a snap. I highly recommend etrailer.com.
by: Phil P04/23/2019
2015 Ford Edge
Trailer Wiring Harness for 2015 Ford Edge:
Harness is well made and plugs into existing sockets. Installation video is very helpful, but also somewhat deceiving. Running the plugs and wires up through the small area in the body's rear panels is not nearly as easy as shown. This proved to be the most difficult portion of the install. On the driver's side, I had to remove the existing wiring to feed the harness wiring due to room constraints. (Larger on this side than passenger side). Following this, I ran the original harness up through the passage. Once installed, everything plugs in as shown on the video. You will need to push the plugs and wiring back down into the passageway to reinstall the taillight assembly (sufficient wiring to do this).
You also need to run a hot wire up to the battery. The Edge underside is all heat shields and cover plates, with little opportunity to snake a wire up to the front of the car (run on driver side where the battery is located). Looking down from the open hood, I saw a SMALL opening through to the pavement and ran a long rod down, taped the wire to it and pulled it up to the battery compartment.
Previous to this, I had installed a 2 inch receiver hitch to the Edge. The harness was much more difficult to install than the hitch.
Overall: Well made as said, works well, sufficient wiring if you choose the shortest paths. However, Difficult to install. Would not recommend installing yourself unless you have considerable patience. Probably worth taking to a shop with an overhead lift.
Phil P.
4/24/2020
Working perfectly after 1 year. Use the Hitch and Harness regularly. No issues. :0
by: James06/16/2018
2016 Ford Edge
I received the product on time and in good shape everything was as it was supposed to be when I ordered it simple directions and easy to install no problems whatsoever.
My only issue which has nothing to do with the product, the issue was, I have a 5 wire flat on my trailer and I need to know how to convert the 4 wire I installed, to hook up to the 5 wire plug on the boat trailer.
Jim
6/16/2019
Everything has been ironed out and Im very satisfied with the product itself and how it is lasted until today.
by: James11/12/2019
2015 Ford Edge
I can report that the Tekonsha 118669
trailer wiring kit was finally installed and working. It was not the easiest to do but with some re-engineering it was connected. The wires to the drivers side were not long enough and had to be spliced. The very large connection
plugs were too large without the body panel being pulled apart but I worked around that issue since the wires had to
be spliced anyway. The Ford tail light connection plug had to be unmounted to make room for the "kit wiring plugs",
Difficult installation but I got it installed and it works.
by: Ken L.09/12/2016
I gave the 2 stars because of the fast delivery of the product and for the beat quality of the product. I had problems with install of the wiring harness. I called for suggestions and was told to use a coat hanger to pull the harness up. Problem on my car, the harness plugs could not be pulled through because the factory plug was in the way and could not be removed. I had to try and remove it, cut the wires, fish the harness wire up and then splice them together again. The passenger side was harder because the fish wire was sent to smaller area of the frame. Wires are just long enough.
The hitch was easier but the video shows easy installation because they have removed the entire exhaust system. This allows the installer to reach into the rear of the frame to pass the backing plate and bolt. Reaching into the space between frame and bumper is difficult since you can only use two fingers to feed the parts in. At times it is difficult to feed the fish wire into the correct spot. The rest of the installation was easy once the bolts were in place.
by: John04/10/2020
Finally finished the project! Took my wife and i two days to install hitch. Then recuperated for a day. Day three we did the wiring at rear of car. Got the black power wire half way to the front. Tired crawling under car without a lift.
Day four, with help from NAPA and cable puller got power wire rest of way up to battery and connected. Tested OK. Do I get a prize for the longest install?
Although it only took him online 16 minutes. And so it goes
by: Jay03/22/2018
2017 Ford Edge
I had previously installed a hitch on a 2014 Ford Edge and ran the wires inside the car. With my 2017 Ford Edge, the instructions were to run the wires under the car on the outside. This is not the product's fault, but running a wire from the battery at the front of the car to the hitch at the rear of the car proved to be way more difficult than I ever would have imagined! Ford has an undercarriage "sheathing" that, when coupled with the fact that I didn't want the wire anywhere near moving parts, made it pretty difficult! What I thought would take 10 minutes took over an hour!
by: Neil07/04/2018
2017 Ford Edge
This harness is meant to be completely external to the car, according to the video. In other words, it does not cross through the trim inside the vehicles inner molding. Where the vehicle hatch lid closes.
THIS HARNESS IS A LOGISTICAL NIGHTMARE TO RUN FROM DRIVES SIDE TAIL LIGHTS TO THE PASSENGER SIDE TAIL LIGHT OVER AND AROUND THE HITCH RECEIVER. Don't be fooled by the install "video" on a Ford Edge SEL. Trying to zip tie the wiring away from the hot exhaust pipes will take many zip ties and tricky placement to avoid damaged wires, not to mention, the wiring is exposed to all the elements. The "T" connector wires should be longer so they can be tucked out of the way so as not to interfer with trying to reinstall the tail lights back in place. You will notice, the training video is edited right after they tell you to put the tail lights on, but don't actually show the process of doing so. It is more difficult than it looks, because the "T" connectors hold the light assembly out from the body of thr car. It takes a lot of fooling around to get the connectors exactly in the right spot. This is why I say, the "T" connector wires need to be longer to get them out of the way. YOU'VE BEEN WARNED. Buy the wiring kit that goes under the trim, INSIDE the car. etrailer themselves is great to deal with, but not this wiring harness. I am glad no one was around when installing this wiring kit, summed up in one word, frustration.
by: Mark E.12/10/2016
2016 Ford Edge
The fit is as advertised and it looks custom. It took less than an hour to install crawling on my garage floor by myself, so if you have a lift and a friend it's fun and easy. hook it up to my 5x8 landscaping trailer and all the lights worked perfectly with the wiring kit. highly recommend this hitch receiver.
by: RCS12/30/2020
Well made, easy installation and just a first class product from a very customer oriented company. The videos are outstanding.
Rcs
12/31/2021
Working great! It’s a high quality product and holds up well. One issue with the connector staying in the mounting bracket and I have to tape it to stay. Not a big issue but one that could be addressed. Would buy the kit again without hesitation and recommend it all.
by: Tom D04/23/2019
Thanks etrailer! I installed my hitch and wire kit in short order,followed the video and WALLA!! ALL done!!! Thank You great product I’ll recommend to friends!
by: Michael08/18/2023
Exact item, delivered quickly!
by: Scott 10/11/2019
2018 Ford Edge
First time installing a hitch and wiring but I'm familiar with vehicles and consider myself an above average shadetree mechanic. Hitch went on as expected, no issues with fitment of installation of hardware, the wiring was not as straightforward as shown in videos.
After 10-15 minutes of trying to fish T connectors up to the taillights, I decided to pull the rear bumper cover. This simply consisted of removing 7 5.5mm fasteners in each wheel well and popping the plastic cover off the retaining clips. Extremely easy and only took a few minutes.
With the cover off, it was simple to remove the factory taillight wiring connector from the mount and install the trailer wiring. A nice surprise was the ability to remove the white clip that mounted the factory connector to the body and install it on the new T connector. This eliminated the 'extra' wiring at the taillight assembly others mentioned was difficult to work around.
I mounted the black control module behind the cover and ran the passenger wiring along the bumper frame, nice clean installation. I ran the main power wire like mentioned in other reviews, under the vehicle into the engine compartment and made the connection at the battery. Overall the install took me around 3 hours, which I could cut in half if I was to repeat the process.
by: Paul F.07/12/2017
2015 Ford Edge
The Wiring harness was just as expected and it even had heat shrink connectors!
Very nice it was as complete as it was, only thing I disliked was the power wire that I had to run to the front of the car was a splice connection to the new harness, I don't get why they just don't make that part of the harness.
Great price, good quality.
by: Dale12/12/2017
Ford Edge
A must buy! Made this install so much easier. Great quality. Everything I needed for wiring was in kit. On my Ford Edge used wire loom to hide wires.
by: Good System, Works Perfectly08/18/2020
Works just fine. A bit fiddly to install, especially the power wire up to the battery. Overall, very satisfied with the performance. No problems, at all.
Will K.
8/19/2021
Works Flawlessly
by: Bill08/01/2020
Fits correctly and works as designed. I needed to pop the bumper out a little bit to thread the connectors through as Ford did not leave any room however it all went back together cleanly.
by: Marsh F.10/05/2020
after a year and 8 months its flawless. the hardest part was crawling under the car to route the harness to the engine compartment but the instructions greatly simplified the installation.
by: T W05/25/2017
2017 Ford Edge
I haven't installed the hitch or wiring yet but the shipping was super fast. Ordered the hitch and wiring assembly yesterday at 3:15 p.m., received my order this morning at 9:10 a.m. Only way I could have gotten it any sooner would have been to go pick it up myself.
by: William03/22/2018
2015 Ford Edge
Works as expected. Installation was a little problematic.
Did not expect to remove the rear quarters to fish the
wires through. The interior panels must be removed also.
As I said, it works.
by: Mike 10/11/2021
Received the hitch quick and items as described. Fit well and installed in about an hour. Only complaint I have is the packing box was torn thus, some of the powder coat was knocked off the corners or the hitch.
by: Gary05/29/2022
Excellent product. Installation was a bit trying. Feeding the wiring up through the body and into the taillight assemblies was the toughest part of the intall.
25
93
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Recommended 2 Inch Trailer Hitch Receiver for 2017 Ford Edge SE AWDThe Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13234 is a confirmed fit for your 2017 Ford Edge SE as is the 1-1/4 inch # C12140 you mentioned. The # C13234 is a stronger hitch receiver with more options for accessories and ball mounts. I've attached an installation video of this hitch for you. If you will be towing with this hitch receiver, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118669. This harness plugs into your Ford Edge's...
view full answer... - Can I Wire My Trailer Wiring Harness on2015 Ford Edge to the 12v Aux Instead of the BatteryI strongly recommend running the Tekonsha T-One Vehicle Wiring Harness # 118669 directly to the battery since the 12 volt accessory plug's circuit is not designed to support the additional load of a trailer wiring harness. A wiring harness needs its own dedicated circuit directly to the battery to provide adequate power and avoid overloading the electronics circuits in your 2015 Ford Edge. We have seen many instances where customers have tapped into a 12 volt accessory circuit, like a car...
view full answer... - How Does the Redarc Tow-Pro Elite Install in 2018 Ford Edge Without Trailer WiringYou will first need to obtain trailer wiring to install the Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR on the 2018 Ford Edge. The Redarc will need to tie into the cold side of the brake light switch to function properly. First you will need a 4-way harness part # 118677 if the Ford Edge is a Sport or Titanium model, you will need part # 118669 if the Ford Edge is a SE or SEL model. The Tekonsha brand is a very reliable brand of wiring that tends to last a bit longer compared...
view full answer...
- Does Heat Shield Get Removed to Install Draw-Tite Trailer Hitch on a 2017 Ford EdgeThe instructions for Draw-Tite trailer hitch # 75234 for the 2017 Ford Edge state "for Edge Sport and MKX AWD model, remove (6) bolts and (1) flange nut attached on center plastic panel with heat shields, see Figure 3, and then remove the panel. Return to owner." See instructions linked for reference. This means that on the affected models the heat shield would not be reinstalled. The hitch itself can act as a heat sink though so nothing is really lost with the removal. I have linked a...
view full answer... - How to Install a Brake Controller and 7-Way on a 2017 Ford EdgeAbsolutely! For your 2017 Ford Edge, I recommend using either the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885 or the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195. The P2 and P3 are our two top selling brake controllers due to their integrated safeguards and built-in diagnostic checks. The main difference between the two is that the P3 has a nicer display with larger easy to use buttons. In order to install either of the above brake controllers you are going to...
view full answer... - Does the Power Need to be Run to the Battery When Installing the T-One # 118669 on a 2017 Ford EdgeThe converter on the Tekonsha T-One # 118669 will need to have the Black wire run to your battery for the 4-Way connector to function properly. It is designed to draw power directly from the battery itself so that the wiring on your 2017 Ford Edge is not affected. The connectors basically get tripped when your brake lights/turn lights/ running lights are activated and tell the converter to send power to the trailer lights.
view full answer... - Recommended Trailer Hitch Receiver, Wiring and Brake Controller For a 2018 Ford Edge SELI recommend the etrailer Trailer Hitch Receiver # e36RR for your 2018 Ford Edge SEL. This receiver has a hidden cross tube giving you a more OEM look. The matte black finish of the receiver will also match better with the rear bumper fascia being the same matte finish. The T-One Vehicle Wiring Harness # 118669 will give you a 4-way flat connector that is needed for most small trailers. The Mounting Bracket # C58001 will secure the connector where it is easily accessible on the receiver...
view full answer... - Parts Needed to Tow a Small Trailer w/ Motorcycles and/or Kayaks w/ a 2017 Ford Edge SELIn addition to the Draw-Tite Max-Frame Trailer Hitch Receiver # 75234 for your 2017 Ford Edge SEL you will also need a Tekonsha T-One Vehicle Wiring Harness # 118669. This will give you a 4-way flat wiring connection that is commonly used on most small trailers. The Draw-Tite Receiver # 75234 measured in at 5-1/2" for the hitch pin center hole to the rear bumper of a similar Ford Edge when installed in our shop. The inside top edge of the receiver was 12-1/2" from the ground as well....
view full answer... - How To Install A 7-way Connector On 2017 Ford EdgeTo install a 7-way connector on your 2017 Ford Edge you will first need to install a 4-way connector. I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat # 118669 if your Edge is an SE or SEL, and the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat # 118677 if your Edge is a Sport or Titanium. We have had great results with the Tekonsha T-One Harness's, and they offer a plug and play installation that only requires you to run a power wire to your vehicle's battery...
view full answer... - Where to Mount 4-Way Bracket on Draw Tite Hitch 75234The Draw Tite hitch part # 75214 does have a bracket welded to the cross tube, but if you wanted to use the more hidden Draw Tite # 75234 we do have an option for mounting a trailer wiring bracket. A great solution for mounting a 4-pole wiring harness like Tekonsha # 118669 without having to drill into your bumper is to use a no-drill bracket like # C57202. The no-drill brackets include a ring clamp that secures to your hitch tube.
view full answer... - Draw Tite Trailer Hitch Recommendation for a 2016 Ford EdgeFor a Draw Tite hitch for your 2016 Ford Edge SE or SEL model the part # 75234 would be the correct hitch to use as it is a confirmed fit and has a 2 inch opening which means more towing capacity and hitch accessories made for it. I attached an install video for more info. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also...
view full answer... - Parts Needed to Tow a Trailer with a 2017 Ford Edge Without Tow PackageThe only thing I was able to find out is that you need the Class II tow package installed on your 2017 Ford Edge 2.0L Ecoboost to achieve the 3,500 lb towing capacity. I tried researching what this tow package includes but it seems like Ford just wants to hide the contents. We do have equipment that you can use for towing with your Ford Edge but I unfortunately can't guarantee that it will safely increase the towing capacity of your vehicle. I recommend using the Draw-Tite Max-Frame Trailer...
view full answer... - Parts Needed to Install Curt C51180 Echo Wireless Brake Controller on 2018 Ford Edge SELTo install a wireless brake controller such as the Curt # C51180 Echo, all you'll need is a functional 4 pole trailer connector and the # ETBC7L install kit you'd looked at. The install kit includes the adapter to convert an existing 4 pole into a 7-way connector, as well as all the hardware, wire and the needed circuit breaker. If you don't already have a 4-pole connector, you can add one using part # 118669. I've linked to a video that outlines how the # ETBC7L kit works, as well as...
view full answer... - Recommended Trailer Wiring Harness for 2017 Ford Edge SELFor your 2017 Ford Edge SEL, the best 4-flat trailer wiring harness is from Tekonsha: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118669 The # 118669 harness is the best because we have found over time that Tekonsha makes the most reliable trailer wiring harnesses in the industry. This harness also has the highest amp ratings, which means it gives your Edge SEL the best prevention against any potential shorts. To mount it you can use Brophy Mounting Bracket for...
view full answer... - Parts Needed to Install Curt C51180 Echo Wireless Brake Controller on 2018 Ford Edge SELI'd be happy to help you with that. Since you already have a functional 4 pole trailer connector like # 118669, the only other part you'll need to install the Curt # C51180 Echo wireless brake controller would be the # ETBC7L install kit. I've linked to some videos that you might find helpful.
view full answer... - Can the Curt Echo Brake Controller be Used with a 2015 Ford EdgeThe Curt Echo # C51180 is a universal brake controller so it will work with your 2015 Ford Edge with the factory tow package. To use the RF with your Edge you will need to make sure that your Edge has a 7-Way with the trailer light and 12V power functions active. From my research online it looks like your factory trailer package comes with a hitch receiver but I didn't see anything about wiring. If you do not have any wiring then you will want to use the Tekonsha # 118669 if you have the...
view full answer... - Wiring to Activate Boat Trailer Brakes for a 2015 Ford Edge SELIf you only have a 4-Way on your 2015 Ford Edge SEL, like the Curt # C56272 or Tekonsha # 118669, then the wiring that you need is the Kit # ETBC7. This connects to your 4-Way and provides both 4-Way and 7-Way connectors that are fully functioning. You will need a brake controller to send a signal back to the brakes on your boat trailer. We actually have an installation video of the ETBC7 kit and the popular Prodigy P3 # 90195 brake controller being installed on a 2016 Ford Edge that you...
view full answer... - Recommended Trailer Hitch Reciever For 2015 Ford EdgeFor your 2015 Ford Edge, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver Class III - 2", # 75234. This is a very similar style to the hitch you had on your 2013. There was a change in the frame from 2014, and there is not an adapter kit to use the 75709 on your 2015 model. For your wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, # 118669. This will plug in behind your tail lights to your factory plugs and then the wire run...
view full answer... - Will Draw-Tite Trailer Hitch 75234 Interfere with Power Lift Gate on a 2015 Ford EdgeThe power lift gate option on the 2015 Ford Edge should not be affected by installation of trailer hitch # 75234. It may not work every time if you try it directly under the hitch receiver but other than that there are no reported issues of the hitch interfering with the power lift gate. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also...
view full answer... - Ford Edge SEL 2016 with Rear Door Sensor Trailer Hitch RecommendationFor your 2016 Ford Edge SEL the Draw-Tite part # 75234 has been confirmed as a fit and would work with the automatic rear door sensor. You just would be limited to the areas on either side of the hitch for activating the sensors. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch...
view full answer... - Parts Needed to Mount 4-Pole Trailer Connector on 2016 Ford EdgeA great solution for mounting a 4-pole wiring harness like Tekonsha # 118669 without having to drill into your bumper is to use a no-drill bracket like # C57202 with the 4-pole bracket # 18144. The no-drill brackets include a ring clamp that secures to your hitch tube.
view full answer... - Does Installation Of Draw-Tite Trailer Hitch For 2016 Ford Edge Require Trimming Rear FasciaPer the installation instructions for the Draw-Tite Trailer Hitch for your 2016 Ford Edge, the rear fascia is not trimmed. In the instructions it does say the fascia is lowered for the hitch installation but no mention is made about trimming. The laast step of the attached instructions say to reinstall the fascia along with the hardware. The # 75234 is a Class lll hitch and it has a 2-inch receiver opening. If you plan on doing some towing you might be interested in etrailer ball mount...
view full answer... - Recommended Towing Parts for a 2017 Ford EdgeIn addition to the Draw-Tite Max-Frame Trailer Hitch Receiver # 75234 you'll at least need wiring, a brake controller, and a ball mount. For wiring use the T-One # 118669 as it's the most reliable that we've found. You'll also need additional wiring for a rake controller - when I checked the online manual for your 2017 Ford Edge it stated that any trailer over 1,500 lbs requires a brake controller. For this I recommend the Wiring Upgrade Kit # ETBC7L so you can use the Curt Echo # C51180....
view full answer... - Recommended Trailer Hitch Receiver for 2018 Ford Edge with Hands Free LiftgateOn your 2017 Ford Edge I recommend the Draw-Tite Max-Frame # 75234 trailer hitch receiver which is compatible with the Titanium, SE, SEL, and Sport models. The Hands-free Liftgate sensor areas will be limited to areas away from the center where hitch receiver is located but will work well on either side of that center receiver tub so you won't lose that functionality and feature. This hitch receiver will work very well for a bike rack or for towing. For your vehicle trailer wiring, I...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Written by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Expert Research:
Victoria B
Video by:
Joshua S
Video by:
Dustin K
Video by:
Jonathan Y
Video Edited:
Jacob T
Video Edited:
Chris R
Test Fit:
Randy B
Test Fit:
Shane H
Test Fit:
David F
Test Fit:
Ryan G
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
4/21/2022
We hate to see this kind of damage. I have sent this over to our customer service team for them to better assist you.