Replacement Pivot Pins w Grease Fittings for Meyer and Diamond Snow Plows - 6-1/2" Long - Qty 2

Video Transcript for Review of SAM Snow Plow Parts - Snow Plow Replacement Parts - 3371302031

Today we're taking a look at the replacement pivot pins for snow plows. Now these replace the pivot pins from Meyer snow plows. They replace Meyer part number 08554C. It includes two pins with grease fittings. The clips are included as well. Now the grease fittings are built-in.

They allow for easier maintenance. Just attach a grease gun and pump in the grease to lubricate. These are made from a durable steel construction, and they do feature a nice protective finish to keep them safe from rust and corrosion.I took a measurement of the overall length, not including the grease fittings. So, just the pin length, edge to edge, and I got a measurement of about six and a half inches long. The distance between these pin holes right here, that gives us a measurement ...

We're measuring on center. So, from the center of one to the center of the other is about four and 3/16 inches, and the diameter of each pin is around 7/8 to 15/16 of an inch. It's right in between those measurements. The product's also made in the USA.That's going to do it for today's look at the replacement pivot pins for snow plows. Again, these replace the pivot pins for Meyer snow plows, and they replace Meyer part number 08554C..