To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your trunk, behind the tail lights on both the driver's side and passenger's side. You will need to remove some interior trim or carpeting to access the harness. Once you've plugged in the T-connector, run the hot lead with the attached fuse holder to the car battery in your trunk. Connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed within your trunk.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
California residents: click here
Average Customer Rating: 5.0 out of 5 stars (7 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.We are pleased with both the wiring harness and the Curt hitch receiver.The written and online video instructions were accurate and very helpful.All the parts fit perfectly and went together as per the instructions.It took my son-in-law and myself about two and a half hours to complete the installation.we backed the car up on steel ramps,installed the hitch and wiring harness.We ran the wire to the battery through a grommet in front of the drivers side tail light and started toward the front. Then we drove off the ramps,placed them in front so we could work under the car and finish installing the wiring. We will use the hitch to pull a light trailer and perhaps for a bicycle rack.This hitch will enable us to hall items we purchase or want to move without renting a truck or paying for a delivery.Thanks for a good buying experience.
I've used it about three times now with no issues. All blinkers work as they should, hazard lights are all in sync, and the brake lights function as expected.
Installation was pretty simple with the exception of running the wire from under the car up through the engine compartment by myself. A second person or a specialized tool would've made that a bit easier though.
Make sure you put in your vehicle before searching for the product. I found the product then put in my vehicle and didn't get an option for LED vs non LED headlights because the first product I found was for LED headlights so I got the wrong product. Customer Service worked with me to get the correct product shipped out quickly though.
Truly was plug and play, hardest part was routing the power wire to the battery. Installation of the tee connectors was a 10 minute operation.
Great product, with clear installation instructions. Customer service was great, too.
Fairly easily installed, easy instructions and quick delivery.
Great product, no problems.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.