Fit of Curt Class I # C11681 on 2015 Honda Accord Sedan Hybrid Model
Question:
Does it fit the Hybrid as well? If so, is it any more difficult to install than on a non-hybrid 2015 Accord sedan? Thanks for your help.
asked by: Craig P
Expert Reply:
According to my Curt representative, the procedure for installing their Class I hitch # C11681 on a Hybrid model 2015 Accord is no different from the model with the standard gasoline engine. The hitch is listed as a fit for ALL models of the 2015 Accord Sedan, including the Hybrid.
If you're planning on using the hitch for light-duty towing purposes, I'd recommend you check the owner's manual first, to make sure Honda doesn't have any prohibitions regarding towing with a Hybrid. If they okay it, you'll also need the following to complete your towing system:
-Trailer wiring harness, part # 118596 or # C56173 if vehicle has LED taillights.
-Ball mount # C45521
-1-7/8 inch trailer ball, part # A-80
-2 inch trailer ball, part # A-82
-Locking hitch pin, part # e98879
I've linked you to an install video.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches - Flush - 2-1/8" Span - Chrome
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Chrome
- Fits 1-1/4 Inch Hitch
- Flush Pin
- 2-1/8 Inch Span
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Hitch Fit for 2021 Honda CR-V Hybrid
- Q&A: Will Curt Trailer Hitch Receiver Fit 2023 Honda CR-V Touring Hybrid
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Can Any Mechanic Install a Curt Trailer Hitch
- Q&A: Is Heat Shield Trimming Required to Install the Curt Hitch part # C11681 on a 2015 Honda Accord
- Q&A: Can 12 Volt Power Be Run With a 4 Flat Trailer Plug?
- Q&A: Recommended Replacement For An Atwood GE16EXT 10 Gallon RV Water Heater
- Q&A: How To See If 2019 Acura RDX Has Plus 12v Power Provision Without Removing Interior Trim Panels
- Article: Hitch Adapters and Extenders
- Article: Trailer Hitch Receiver Sizes
- Article: How to Choose a Bike Rack for a Sedan or Hatchback
- Article: Best Boat Accessories
- Article: Trailer Wiring Diagrams