Will Curt Trailer Hitch 11681 Fit a 2014 Honda Accord Sport with Dual Exhaust
Question:
Will this hitch fit? My Honda Acccord Sport has a dual exhaust. Will this Hitch fit? Thanks
asked by: Michael A
Expert Reply:
Yes, Curt trailer hitch # C11681 will fit your 2014 Honda Accord Sport with dual exhaust. Take a look at the picture I have included that shows the hitch on an Accord Sport model with dual exhaust.
If you plan on using the hitch for a bike rack or cargo carrier you will need to make sure the accessory is rated for use with a Class I trailer hitch. Also, for non-trailer loads, Curt requires the use of stabilization strap # 18050. And on a bike rack you are limited to 2 bikes maximum.
If you plan on doing any towing, consult the owners manual for the towing capacity of the vehicle. For a ball mount use # C45521. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258. For trailer wiring use # 118596 if the vehicle does not have LED tail lights or # C56173 if it does have LED tail lights.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Can Any Mechanic Install a Curt Trailer Hitch
- Q&A: Will Curt Trailer Hitch Receiver Fit 2023 Honda CR-V Touring Hybrid
- Q&A: Is Heat Shield Trimming Required to Install the Curt Hitch part # C11681 on a 2015 Honda Accord
- Q&A: Can 12 Volt Power Be Run With a 4 Flat Trailer Plug?
- Article: Hitch Adapters and Extenders
- Article: Trailer Hitch Receiver Sizes
- Q&A: How To See If 2019 Acura RDX Has Plus 12v Power Provision Without Removing Interior Trim Panels
- Q&A: Why Does Curt Require the Stabilization Strap While Carrying a Bike Rack on a 2013 Honda Accord
- Q&A: Recommended Replacement For An Atwood GE16EXT 10 Gallon RV Water Heater
- Article: How to Choose a Bike Rack for a Sedan or Hatchback
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Best Boat Accessories