Components Needed to Tow a Trailer with 2014 Honda Accord Sedan
Question:
I would like to purchase a hitch for a 2014 Honda 4dr accord. what all do I need as far as hitch ,drawbar,ball, wires, locks, and anything else needed? I plan on hauling a trailer with a trailer fitting of 1 7/8 inch. thanks
asked by: Gerald
Helpful Expert Reply:
The five components that will be needed to tow a trailer with your 2014 Honda Accord are a trailer hitch receiver, ball mount, pin and clip, trailer hitch ball, and wiring harness.
For your Accord, I recommend the following towing components:
The Curt Class I Receiver Hitch, # C11496. This custom fit trailer hitch bolts directly to the Accord's frame with no drilling required and has a 1-1/4 inch opening.
Sportframe 2-1/8" Rise or 2-3/4" Drop Drawbar, # 3593. A pin and clip are included.
1-7/8 Inch Hitch Ball, # 19256
The Custom Fit Vehicle Wiring, # 118596. If your Accord has LED taillights, you will need to use the Custom Fit Vehicle Wiring, # C56173.
For added security, you can use a locking hitch pin like the Tow Ready Trailer Hitch Receiver Lock with Swivel Head, # TR63254.
I have attached a few articles and a video for you to check out.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Tow Ready Base Rail Lock for 5th Wheel Trailer Hitches - 1/2" Diameter Pin
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Unique
- Steel
- Fits 5th Wheel Hitch
- Bent Pin
- 3-1/2 Inch Span
- Tow Ready
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Can 2010 Honda Accord be Jacked Up with Draw Tite Hitch Installed
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Differences Between Kuat Sherpa 2.0 and NV 2.0 Bike Racks
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB
- Q&A: Recommended Receiver Hitch to Carry 2 Bike Rack on 2010 Acura TL
- Q&A: Comparing Curt Trailer Hitch # C11085 and # 11496 for a 2008 Honda Accord
- Q&A: Visibility of Hitch After Mounted on a 2009 Honda Accord 4 Door
- Article: Best Bike Racks for Recumbent Bikes (2023)
- Article: Hitch Adapters and Extenders
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Hitch Receiver Sizes
- Article: Basics of Cargo Nets and Tarps