Trailer Hitch, Ball Mount, Balls, Wiring, and a Bike Rack for a 2013 Honda Accord
Question:
Is it possible to put a 2inch trailer hitch receiver on a 2013 Honda Accord? I see in some of the videos where a 1.25 hitches are used. I just wanted to know if it is possible to go bigger. I have a bike rack that holds 4 bikes at one time that fits a 2 inch receiver and I also have a small single axle trailer that I use to pull when I had my Dodge Dakota.
asked by: Doug
Helpful Expert Reply:
All of the trailer hitches for the 2013 Honda Accord are Class I trailer hitches with a 1-1/4 inch receiver. This is based on the abilities of the vehicle. Two inch trailer hitches are not available. Because there are only Class I trailer hitches available, see link, you will be limited to carrying 2 bikes at most and will need to use a bike rack that is compatible with a Class I trailer hitch.
For a trailer hitch, since you have indicated you may be towing, I recommend Curt model # C11496. The recommended ball mount, pin, and clip is # 3593. I have included a link to a video showing a typical installation for you to view. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring if the vehicle has LED tail lights use # C59496. If it does not have LED tail lights use # 118596.
Be sure to consult the owners manual on the towing capacity of your Accord so you do not exceed its capacities.
For a bike rack I recommend the Swagman Titan, # S63400, since it is Class I compatible, holds 2 bikes, and has an integrated cable lock and a rise in the shank for additional ground clearance. I have included a link to a video review of this rack for you.
If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical mens bike would) then I recommend using bike adapter bar # 64005. This will allow you to carry those bikes more level and will provide better ground clearance. I linked a video showing how the adapter works.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Swagman Bike Frame Adapter Bar - Small - 22-1/2" - 30" - 35 lbs
- Accessories and Parts
- Hitch Bike Racks
- Spare Tire Bike Racks
- Trunk Bike Racks
- Adapter Bar
- Frame
- 24-3/8 - 33-3/4 Inch Long
- Swagman
more information >
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 8 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Swagman Titan Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Tilting
- Hitch Bike Racks
- Hanging Rack
- Folding Rack
- Tilt-Away Rack
- Frame Mount
- Bike Lock
- 2 Bikes
- Class 1
- Class 2
- Class 3
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Swagman
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Trailer Hitch for 1995 Chevy G20 Van
- Article: How to Choose the Right Trailer Hitch Class
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Magnetek Series 6300A Model 6332 Replacement Converter
- Q&A: Replacement Recommendation for TDE 46210 Hub
- Q&A: Will the Demco Brake Actuator # DM8202022 Work with Disc Brakes on a Boat Trailer
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Q&A: Troubleshooting Factory Brake Controller on 2017 Chevy Silverado 1500 Z71
- Q&A: Can 2010 Honda Accord be Jacked Up with Draw Tite Hitch Installed
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller Installation: Starting from Scratch
- Article: Best Bike Racks for Recumbent Bikes (2023)
- Article: Hitch Adapters and Extenders
- Article: Trailer Hitch Receiver Sizes