bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. Converter
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118496
Retail:$80.86
Our Price: $64.45
You Save: 20%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 1.08 lbs
Add to cart
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Custom Fit 118496
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Includes tail light converter. 1-800-940-8924 to order Tekonsha custom fit vehicle wiring part number 118496 or order online at etrailer.com. Free expert support on all Tekonsha products. Great prices and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (722)
  • Q & A (0)
  • Photos

Tekonsha Custom Fit Vehicle Wiring - 118496

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • Converter
  • Tekonsha

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Includes tail light converter.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily - no cutting or splicing of wires
    • Locate connection points either behind tail lights or along frame rail
    • Plug in T-connector
  • Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage:
    • Stop/turn lights: 2.1 amps per circuit
    • Tail lights: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located on the driver's side and passenger's side, either behind the tail lights or along the frame rail. If your wiring harness is behind the tail lights, you will have to remove the tail light assemblies to gain access.


Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.


Tail Light Converter

A tail light converter is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. The tail light converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.



118496 Tow Ready T-1 T-Connector - 4 Wire

Installation Details 118496 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:


Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118496

Average Customer Rating:  4.9 out of 5 stars   (722 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Includes tail light converter.

by:
2007 Toyota Tacoma

I'll begin with the fact that I am not very handy. This wiring harness was perfectly engineered to be idiot proof. I was able to install the whole thing perfectly, without incident, in about 30 minutes. I do not have a trailer hitch receiver beneath the bumper. I just have a hitch ball on the bumper, so I fed the end through the spare tire crank slot. Everything works perfectly.



by:

This T-ONE wiring harness looks great, and talk about quick delivery, it was the best



by:
2007 Toyota Tacoma

Oh my goodness! It was so easy to install the harness, and everything worked perfectly. The video was a plus. I will most definitely buy from your company again!



by:

The perfect solution for my towing needs. A high-quality product delivered by a fast reliable service at a great price.



by:
2012 Toyota Tacoma

I had been looking for a solution to securely add a 4 way flat connection and be able to plug in my Rear LED light bar to. The product was accurate and very easy to install in less than 15 minutes. All plug-n-play. Very happy with the final result. Thank you

Fshams

2/6/2019

Product has been flawless and functioning perfectly



by:

Great part on time and I use it a lot I would recommend this part



by:

Excellent service from Christy. Poor service from UPS.

Gerald

2/11/2024

Everything is still working great!



by:
2015 Toyota Tacoma

Great services. trailer pulls great for my little truck. Easy to install hooks and hanging items inside. Prices are very competitive, this was the best price and seems like I got more for my money. Staff did great job explaining total weight my truck can handle with this trailer. recommend if you are looking for a trailer to give them a chance. I would expect you to get the outstanding service I received.



by:

One year follow-up: The product works as advertised. No problems at all over the last year. Installation was simple and straight forward. One comment only about the optional mounting bracket for the 4-pin connector: get/use better self tapping screws before you attempt to mount the bracket. Even though I pre-drilled the supplied self-tapping screws are very soft and snapped off. I then relocated the bracket and used my own (hardened) self-tapping screws. Overall I'm very happy with the product.

Tom W.

12/19/2022

Another year 2nd gone by and the T-One harness and connector are still working perfectly. I periodically spray the 4 pin connector with wd-40 to prevent corrosion maybe twice a year. The contactspins look good and work perfectly.



by:

it is all plug-and-play. easy



by:
2009 Toyota Tacoma

The wiring system was pretty straight forward. The video pretty much said all I needed to know. I'd rather use this set-up than any guy at a hitch shop doing a quick splice to the wiring in my truck, any day. The only thing I did differently from the video was put my wiring in the black conduit that you can buy pretty cheap at any auto parts place. This change will keep the wires from chaffing and makes the whole job look more professional.



by:

Timely shipment and very easy to instal l.



by:

The wiring harness was fairly easy to install and directions were spot on. I recommend using flex tubing to protect your wiring; better to be safe than sorry.



by:

As always ease of install with these kits. Just a walk in the park even taking my time and messing around in the garage for a bit while kit took ten minutes to install



by:

Awesome, I can't thank you enough for this.
Like factory made - VERY easy to install.
Took me maybe 15 min to put on my truck.
Very well-made.
If you are looking for wiring harness - this is the one to buy.



by:

While the directions were clear the associated video they suggested was spot on perfect.
didn't take long and works like a charm!

Tom

3/19/2023

Knock on wood everything is working fine even though we here in northern Ca. have had a deluge of rain. No problems, no complaints!



by:
2014 Toyota Tacoma

I had received multiple quotes to install a hitch on my 2014 Toyota Tacoma. All were around $400. So I did a little research and found the etrailer.com site. I found I could buy the hitch, the wiring harness and ball myself for less. The installation video they provided me gave me the confidence I could do the install myself. Now it's on and the entire process couldn't have been easier. If you can use a socket wrench and screw driver you can install your own hitch. Piece of cake!



by:

I gave you a 5 star even though UPS tried to mess up your excellant delivery time. they sent it to the wrong PO so instead of getting it 3/17 it came on 3/20. it attached easily per instruction and video. the only improvement I made was to encase all the wiring in flexible conduit. when finished everything tested perfect. thank you very much.



by:
Toyota Tacoma

Perfect fit for my Toyota Tacoma. Easy install. Still working great after one year.



by:

Quality!!! Really loved the quick delivery, easy ordering process, and installation instructions.



by:
2014 Toyota Tacoma

2014 Tocoma..The wiring install, went slower the the hitch install.
the main reason was the taping of the wires to the truck wiring and getting up and down. (time was 50 minutes)

Install the driver side first, only the plug is placed with the tail light,
install the passenger next, only the plug is placed with the tail light.
Tape the new wiring to the stock wiring, start with the tail lights and work down you will find you have just the right length of wire. I taped the 2x2 black connector to the wiring harness. If the wires were 6 inch's longer on both sides, I would have used the two sided tape and stuck the connector on the frame

K.l.

2/9/2015

I have used the the trailer connection on 5 different days for about 1 hour each time, two weeks ago I had to used the trailer to help move a friend of ours and it was raining so the lights was on all the time. the trip was 12 hours,there and 7 days of short trips and on the way home about six hours in to the return trip i stopped for fuel and when I started the truck I lost the tail lights and the brake lights,blown fuses. I stopped at a auto parts store and picked up some new fuses,when i turned on the lights the new tail light fuses popped and when I stepped on the brakes, the new brake lamps fuses popped. We stopped for the night, I will not drive a truck and a trailer at night without lights.The next day, and a hundred lighter, I got home, I disconnected the trailer and replaced the fuses. The fuses stilled popped. I opened the tail lights and disconnected the left tail light trailer connection and the fuse sill popped, and i disconnected the right tail light trailer connection and the fuses held. I will pull out the bad harness and replace it with a factory tow harness more money and more time to install but I no more problems and I will order a trailer brake to plug in to the stock wiring.



by:

Fit up was perfect and installation was very easy. Have had zero problems after a year of owning so far and don’t see any developing anytime soon!



by:
2005 Toyota Tacoma

The wiring for my trailer hitch arrived very quickly. I had purchased the hitch a while ago and installed it myself using the instructions and watching the videos from etrailer. It was pretty easy. I had dreaded having to trace wires and have unsightly splices . The wiring fit perfectly for my 2005 Toyota Tacoma. Unplug the taillights, plug the trailer wiring in, put the taillights back on the truck. I also installed the trailer plug that allows me to use 4 pin or 7 pin wiring. That was pretty easy too. Just make sure you have some self tapping screws on hand. Would definitely recommend all the products i’ve purchased from etrailer.

Cynthia

11/3/2019

Still very happy with my purchases. I bought a bumper, trailer hitch , and wiring harness. I installed all myself using the Etrailer instructions and videos. Would recommend to anyone looking for good products that you can install yourself to save a ton of money!



by:
2007 Toyota Tacoma

I installed this wiring kit ( Tekonsha 118496) on a 2007 2 wheel drive Tacoma. All components appear to be of decent quality and everything fit and worked as it should. I added protective covering to the wiring running underneath the vehicle to the right side tail light and to the 4 flat plug. When looking for a kit, I was impressed with the information and reviews supplied by etrailer. Compared to wiring a trailer hook-up from scratch, this was a breeze! Shipping was reasonable and took less than 2 weeks to get to Canada.

Bryan

3/1/2022

My Tekonsha 118496 wiring kit is still working well after 1 year in use.



by:
2012 Toyota Tacoma

Products great, Service is great, Delivery service is great, but the guy in accounting that won't give us a a Professional Auto Repair Shop a wholesale account because I said a few curses of words, who is part of the cancel culture and discrimination of expression well he is not so great. And I can keep respectively making this commentary on your reviews with each and every review and not one person in management does anything about it. I suspect ettrailer is more about greed, control, is not about the relationship, but the money. I think they think they are good enough. You ask for my reniews but you really dont care... So from now on it will be nothing but one-star reviews.

I tried to get your attention over and over being nice with 5 star reviews but telling you the guy in accounting is a thin skinned moron with customer interaction. And my curse words had nothing to do with him but the demand from him of something I could not at that minute provide him. So it was about a circumstance and not a personal attack, and countered a solution for us to contact hoim back with the validation for the account but he rejected us. Hung up on me, and still to this day no one has followed up. So Thank you for being just good enough, and not GREAT!

Etrailer Expert

Katrina B.

7/19/2022

I am sorry to hear you are having a hard time with our company. I have sent your information over to our customer service department for them to better assist you.


25
722
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • 7-Way and 4-Flat Wiring Harness for 2010 Toyota Tacoma
    If your 2010 Toyota Tacoma has factory 7-Way wiring that you are looking to upgrade, you can add a 7-Way and 4-Flat connector with the Reese Multi-Plug Wiring Harness for Factory Tow Package # 74682. This harness plugs directly into a factory 7-way harness behind the rear bumper. If your Tacoma doesn't have a factory-installed trailer connector, you will want to start by installing a custom wiring harness like the Tekonsha T-One Vehicle Wiring Harness with 4-Flat # 118496. This will get...
    view full answer...
  • 2017 Toyota Yaris iA Engine Block Heater Solution
    While we don't have a block heater that fits your 2017 Toyota Yaris iA we do have a heated dipstick that you could use with the # KH15200.
    view full answer...
  • Ground Wire Connections For a Water Heater And Battery On a Camper Trailer
    As this can vary from manufacturer to manufacturer you will typically see the ground wires ran to a frame/chassis ground. This reduces the number and amount of wiring that is required to run all the wiring directly to the battery. Yes the battery will be grounded to the frame on these type of campers. Often this is done as the battery on your camper is not only for powering the camper but is also tied into the breakaway brake system. This allows them to only use one battery instead of...
    view full answer...
  • Recommended 7-Way Trailer Connector and Brake Controller for 2019 Nissan Leaf
    Happy to help. For your 2019 Nissan Leaf I recommend using the the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56227 if you don't already have a 4-way trailer connection. Then to upgrade to the 7-way you can use the kit # ETBC7 which includes all the wiring, circuit breakers, and connectors. This will allow you to add the brake controller of your choice. I personally really like the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR because of...
    view full answer...
  • Troubleshooting Volkswagen Factory 7-way Trailer Connection Issue
    The issue with your Volkswagen with the trailer wiring is the draw on the trailer is not enough. What will solve your dash issue as well as your trailer lighting issue is the 7-Way Trailer Adapter for VW, Audi, and Porsche Towing Trailers with LED Lights # C57003. This adapter is made specifically for what you are describing.
    view full answer...
  • Towing Capacity of a 2013 Toyota Tacoma 4.0 Double Cab 4x4 with Factory Tow Package
    I can help you out, no problem. What you are going to want to look at is the towing capacities of the truck. You need to know the gross combined weight rating. This is the most the vehicle, including cargo and occupants, plus the trailer can weigh. This information is usually in the owners manual or on a sticker in the door jamb. Looking at an online copy of the owners manual the 4 liter V6 model of the 2013 Toyota Tacoma with 4-wheel drive could have one of several capacities depending...
    view full answer...
  • Recommended Parts Needed To Tow a Trailer with a 2013 Toyota Tacoma
    The etrailer Trailer Hitch Receiver part # e98850 is a great made in USA option for a 2013 Toyota Tacoma. It features a bolt-on install and it has a hidden design. In order to complete the towing setup you'll also need the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118496 which is plug and play along with a ball mount/hitch ball for which I recommend the Curt Channel Style Adjustable Ball Mount part # C45900. This would give you a complete setup and ready to tow.
    view full answer...
  • Recommendations For Changing Brakes On a Mobile Home Axle
    My recommendation would be to change out your entire axle assembly as the mobile home style axle and brakes you have are not designed with replaceable parts in mind. It may be easier and make more sense to install a axle like the Dexter Trailer Axle w/ Electric Brakes # 7461121-EB. If you can provide me with hub face and spring center measurements on your current axle I can help you find a replacement option. If you prefer to use your current axles then the Brake Mounting Flange # 4-44-1...
    view full answer...
    Image 1 for
  • Troubleshooting Trailer Wiring on 4-way and 7-way Connector of 1998 Toyota T-100
    For your 1998 Toyota T-100, it sounds like you have a 4 way that connects to a 7-way adapter. I recommend testing your 4-way harness using a circuit tester like # PTW2993 to make sure that wiring harness is failing at that left turn/stop pin. If you need to replace the harness, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118496 is my recommendation. This will give you a great harness that will allow you to connect the 4-way trailer or...
    view full answer...
  • Recommended Battery Charge Line for Motorhome with Toad
    If you are only using a 4 way from your motorhome it won't have the 12V power line to charge your battery in your toad. If you use a 7-way then it has that already integrated if it is connected properly. I recommend using a 7-way on your motorhome which if you only have a 4-way means using a kit like # ETBC7L and # 12-1-1 for any extra length needed. Then I recommend using the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 and Roadmaster Battery Charge Line Kit for...
    view full answer...
  • Parts Needed to Install Brake Controller in a 2013 Toyota Tacoma without Trailer Connector
    To install a brake controller in your 2013 Toyota Tacoma that does not have a factory 7-way you are going to have to go the hardwire route. I attached an install video that will cover that process in a similar 2009 Tacoma but you would need to start with a 4-way if you do not have one already. For that you would need the part # 118496. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install...
    view full answer...
  • Recommended Brake Controller And Wiring For 1995 Toyota T100 Pickup Truck
    Since you have no brake controller port on your T100 truck you will need to hardwire the brake controller. Your truck has separate wiring so you can use a circuit tester like part # PTW2993 to find a wire that shows power only when the brake pedal is pressed. Many times, the wires are run along the driver side under the door threshold. The brake controller I recommend is the Prodigy P2, part # 90885. This is our most popular because it is easy to install and operate. There are 4 wires...
    view full answer...
  • Will the Tow Ready Custom Fit Trailer Wiring for the 2007 Toyota Tacoma Fit On an X-Runner Model
    The Tow Ready Custom Fit Vehicle Wiring for the 2007 Toyota Tacoma, item # 118496, will provide a 4-Way connector at the rear of your 2007 Tacoma X-runner. There is no splicing or extra parts needed to install this harness, it simply plugs in-line with the tail light wiring and is routed to the rear bumper. You will need to attach the white ground wire to a clean rust and paint free chassis ground with the included self tapping screw. You may want to consider using a mounting bracket and...
    view full answer...
  • Parts Needed to Install 7-Way Trailer Socket on 2015 Toyota Tacoma
    Exactly what is included in a "tow package" varies among auto makers and can also vary between vehicle models and model years. It is possible that your 2015 Toyota Tacoma with "tow package" does not have a 7-way vehicle socket installed. You can either obtain a harness from Toyota or you can bypass any factory wiring altogether easily enough by installing first a 4-pole harness like # 118496 from Tow Ready (shown in the linked install video) and then a 7-way by adding kit # ETBC7. This...
    view full answer...
    Image 1 for
  • Installing Tekonsha Primus # TK90160 in 2012 Toyota Tacoma
    A brake controller is not a vehicle specific item, so one way or the other, it can be installed in just about any vehicle. If your new Tacoma has the factory installed 7-way trailer connector at the rear bumper, you can re-use the # 3040-P Brake Control Wiring Adapter from your Tundra (if you used one). If not, you would need to purchase one. One end of the # 3040-P would plug into the rear of your Tekonsha Primus, the other end plugs into the factory connection port located between the...
    view full answer...
    Image 1 for
  • What Brake Controller is Recommended for a 2008 Toyota Tacoma?
    The brake controller I recommend for your 2008 Toyota Tacoma is the Prodigy P2 # 90885; it is a proportional system that has a reputation for being high in quality. For a complete install on your Tacoma, you would need the Universal Installation Kit for Trailer Brake Controller # ETBC7, and finally, if you do not already have a 4-way connector, you would need the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118496. I have included links to video reviews and installs...
    view full answer...
  • What Years Toyota Tacoma Does Draw-Tite Hitch 75236 Fit
    I confirmed with Draw-Tite that the Draw-Tite Max-Frame Trailer Hitch Receiver # 75236 does fit all model years from 2005 through 2015 of the Toyota Tacoma (except the X-Runner model); that includes the 2.7L and 4.0L engine. I have added a link below to a video install for you to check out as well of the Draw-Tite Max-Frame Trailer Hitch Receiver # 75236. Additionally, if you also need a 4-way trailer wiring harness, the correct part for the same model years of Tacoma is the T-One Vehicle...
    view full answer...
  • Comparing Tow Ready 118496 & Curt C55513 4-Pole Trailer Wiring Harnesses for 2010 Toyota Tacoma
    The only significant difference between the two is the rated maximum current output on each of the circuits. Tow Ready 118496 can provide up to 2.1-amps for each of the stop/turn circuits and 7.5-amps for the running light circuit. The Curt C55513 offers a 3-amp capacity for the stop/turn circuits and 5-amps for the running lights. The Tow Ready 4-Pole T-One Vehicle Wiring Harness # 118496 and the similar Curt T-Connector Vehicle Wiring Harness # C55513 are both confirmed fits for your...
    view full answer...
  • Recommended 7-Way Trailer Connector for 2017 Acura MDX
    I was able to find your invoice and confirm you have the Curt 4-way trailer connector # C56192. This does not work without additional components for towing a trailer with electric brakes. You will need to upgrade to a 7-way and add a brake controller. My recommendation for you is to use the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires # ETBC7L which will connect to your existing 4-way and also add 12v power from your vehicle battery. Then you can...
    view full answer...
  • Comparing Curt and Draw Tite Hitch for 2008 Toyota Tacoma and Trailer Wiring Recommendation
    The Draw Tite hitch part # 75236 and the Curt # 13323 are both really solid hitches for your 2008 Toyota Tacoma. They are so close in design that I'd honestly pick whichever had the best price as they'll both serve you the exact same. The best trailer wiring harness then will be the one with the highest amperage rating since you plan on having several lights installed on the trailer. Since you plan to have more installed on the running light circuit the Tekonsha part # 118496 is the way...
    view full answer...
  • How to Install Wiring Harness 118496 in 1995 Toyota T100
    The installation of a 4-flat connector such as the T-One Vehicle Wiring Harness # 118496 in your 1995 Toyota T100 is a very simple and straightforward process; it only requires plugging in the T-connectors at the taillight wiring harness. I was unable to locate what harness you ordered from us so I'm not certain what exact harness you used but the process should not be any different (see linked installation video which shows how this harness installs). If you only cut off the connector...
    view full answer...
  • Installing a 7-Way Trailer Connector on a 2005 Toyota Tacoma
    I'm not sure why but I can tell you that the part you're looking at, Hopkins Plug-In Simple Vehicle Wiring Harness # HM11143910, is a fit for the Lexus 570 but not your 2005 Toyota Tacoma. To install a 7-way trailer connector on your truck you need to first start by adding a 4-way if you don't already have one. I recommend using the Tekonsha part # 118496. It plugs in either behind the tail lights or along the truck's frame rail on both sides. Once the 4-way is installed, or if you...
    view full answer...
    Image 1 for
  • Parts Needed to Install a Brake Controller in a 2009 Toyota Tacoma without a 7-Way
    You will need to start with a 4-way (if you do not have one). For that you would want the # 118496. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake...
    view full answer...
  • Parts Needed to Install 7-Way Vehicle Connector for Brake Controller on 1996 Toyota T100 Pickup
    You correctly identified the trailer brake controller installation kit you'll need for your 1996 Toyota T100 pickup, our part # ETBC7. Along with this you'll need a 4-pole wiring harness like TowReady # 118496 unless your truck already has a working 4-pole. The actual brake controller installation will be a hard-wired type in your truck. I have linked at right both articles and a video showing the # ETBC7 brake controller installation kit. We recommend a proportional-type brake controller,...
    view full answer...


< Previous
123. . .12



Do you have a question about this Custom Fit Vehicle Wiring?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video by:
Kathleen M
Employee Chris R
Video by:
Chris R
Employee Aidan B
Video by:
Aidan B
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee Ryan G
Test Fit:
Ryan G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.