Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs
(74 reviews)
Price: $149.74
In Stock
Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs
Item # 1120210
Our Price: $149.74
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (74)
- Q & A (0)
- Videos (3)
- Photos
Superwinch Electric Winch - 1120210
- ATV - UTV Winch
- 1001 - 2000 lbs
- Wire Rope
- No Remote
- Superwinch
- Slow - 0 to 4 fpm
- 1.0 HP
- 11 - 20 lbs
- 1-Stage Planetary Gear
Features:
- Features:
- Powers Load IN and OUT
- Includes freespooling clutch for fast wire rope payout
- High efficiency low amp draw motor
- Full-metal planetary gear-train
- Sealed, handle-bar-mounted rocker switch
- Dynamic brake
- Circuit breaker protected
- Includes Pulley Block, D-Shackle and Roller Fairlead
- Fairlead requires mount kit (sold separately)
Specs:
1120210 Superwinch ATV Recovery Winch
California residents: click here
Video of Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Superwinch Electric Winch - ATV - UTV Winch - 1120210 Review
Today we're going to review part number 1120210. This is the super winch LT2000 ATV winch. Has a 2,000 pound weight capacity. This is a compact, quiet, all-purpose, entry level winch. It's very powerful, versatile, and easy to use. This can be permanently mounted, or it can be used as a portable winch, with the optional quick-connect wiring and mounting kits, that we sell separately on the our website.
This part will include everything shown here; includes the winch, solenoid and circuit breakers, and all the battery wiring. Includes this rocker switch, includes the roller fair-lead, that the cable will run through. Includes the hook on the cable, and includes this pulley with the hook, and a D-shackle connect-it, and all the mounting hardware that's needed. The roller fair-lead will require a mount kit, that we sell separately on our website. It's listed on this product page as a related product.
It's part number SW87-42616. Now this winch will power the load in and out. Right over here is a knob that if you pull this knob out and turn it to hold it out, it will allow this clutch to free-spool. Gives you a faster wind wire rope payout. When you're done, you just click it back in and you're ready to power it. The motor is a high efficiency, low amp-draw motor.
It does use a full-metal planetary gear. It includes, I mentioned, the sealed handlebar-mounted rocker switch, to control it. It does use a dynamic break, and it circuit breaker protected. A few specs on this, on the winch, is a rated line pull of a single line of 2,000 pounds. The motor is a 1 horsepower motor. The gearing is a differential planetary gearing.
The gear ratio on it is 153:1. Again, I mention the free-spooling clutch, which is a pull and turn, to put it in the free spool. Dynamic breaking. The wire rope that's included with this is a 5/32 diameter, by 49 feet long. It does come with the latched hook, and the handle strap to hold on to. The switching method is a protected relay. To give you the idea of the size of this, it's a pretty small winch. Overall length from edge to very edge, is going to be right at 11 inches. The height, is right at 4 inches. The depth of it is also right at about 4 inches. Now just one warning on this. I do want to let you know that this is a wire cable that's included. Synthetic rope cannot be used on this ATV winch. Or actually any ATV winch that uses an aluminum drum. This does use an aluminum drum. Synthetic rope can only be used on winches that have a steel drum. This comes with the wire cable, and is made just to use wire cable. That should do it for the review on part number 1120210. This is the super winch LT2000 ATV winch, at a 2,000 pound capacity. .
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs - 1120210
Average Customer Rating: 4.7 out of 5 stars (74 Customer Reviews)
by: David06/24/2023
Great wwinch, but the control box is not working. It clicks, but nothing works
by: Ed S.04/08/2014
I installed the Superwinch LT 2000 on a 2007 Honda Rancher and also the mounting kit # 2202889. The install went well. I had never put a winch on an ATV before. The video on etrailer was very helpful and would have been difficult to install without it. The instructions that come with the winch and the mount kit are minimal. I found the electrical wire length to be enough as I mounted the solenoid right behind the battery under the seat. The pink wire on the ignition was what I used to tap into to run the switch.
by: Chris R.10/28/2016
Easy installation, mounted perfect to my Polaris 400 Sportsman ATV using the mounting kit that came with the winch.
by: William J08/16/2017
I bought this 2000 lb Superwinch for the replacement of a 1000 lb winch on our houseboat. The winch is used to secure a jetski on the back of the boat! The winch works perfectly and the price and free shipping are what brought me back to etrailer! I'm a very satisfied customer.
by: Darrin K08/27/2014
Not impressed, was missing two bolts, two lock washers and two nuts. Had to go to the hardware store to get more. Instillation directions are a joke. I do not recommend.
by: Eric E01/06/2015
your product 1120210 is very good, I have one on my 4 wheeler and am very satisfied with it. thank u for an affordable great product.
by: Stephen Pope06/12/2017
I haven't installed the product yet, but the etrailer sales rep Kelsey was very helpful through the process.
by: George 05/11/2020
I did not install it yet, however the service from the etrailer was impeccable
by: Keith11/27/2016
Works good with plow, very fast for raising the plow. Would have liked longer cables to the battery in order to mount the box in the front.
by: dan m08/08/2013
everything went well till wire and solenoid
by: Dave H02/19/2016
All Hardware to make winch work included which make it convent to install
by: Russel 02/08/2021
great shipping product for a atv plow
by: TOM03/28/2013
Product as described. Great customer relations. Immediate shipment. Pleasure doing business with. Have placed an additional order.
by: Chris11/29/2018
easy install and works great! fast ship ping
by: Rudy R10/30/2021
Easy to install. A little noisy but what the heck it’s a winch. Great alternative for the factory version if you can find one. Factory version $350, this set up half the price.
by: Jim02/03/2016
Very pleased with the product itself as well as the price. Delivered on time. Absolutely zero problems.
by: Robert Showman 09/07/2017
Works great!
by: RB05/23/2014
Great product, great service, installed on 2014 polaris sportsman
by: Monte03/28/2016
Great seller and product quick shipping thanks a lot. Putting on a four wheeler for a plow
by: JIM R.02/01/2017
THE WINCH WAS JUST WHAT I WANTED AND AT A GOOD PRICE AND I GOT IT VERY QUICKLY. GREAT PRODUCT AND GREAT SERVICE
by: Allen 06/01/2020
Good product, reasonable price, and fast shipping.
by: Brad 01/22/2022
Incredible fast shipping and a great pr ice
by: Linda 09/05/2020
by: Darrell 08/23/2021
by: Donna 12/09/2021
25
74
Show More Reviews
See what our Experts say about this Superwinch Electric Winch
- Looking for an Electric Winch to Raise a Platform Into the Sacred Man CaveA man cave in the attic, sounds like an interesting project that you have going on here. I would love to see pictures of the project once it is completed! The StrongArm AC Powered Winch, # DL25514, that we offer powers in and out to avoid a free-fall situation. This winch has a load capacity of 1,200 pounds based on a 10' pull and should be used intermittently with a maximum continuous run time of 4 minutes. I do have to mention that all Dutton-Lainson StrongArm electric winches are built...
view full answer...
- Winch Mount for a 2013 Honda TRX 420Yes, I checked and they do list mounting kit # BDW15114 as a fit for your 2013 Honda TRX 420. With this mount you can use Superwinch models LT2000 (SW1120210), LT3000 (SW1130220). The LT2000, # 1120210, is a popular option. I have included a link to a video showing a typical installation for you.
view full answer... - Comparing the Master Lock Trailer Winch # 2953AT with Superwinch # 1220210The rack and pinion for the Master Lock Electric Trailer Winch, # 2953AT, is in reference to the way that the winch brakes. It is a mechanical system that can support a load when stopped and the clutch is not engaged (which would allow the line to be pulled out). A dynamic brake uses the motor to apply tension to the drum and it cannot hold a load. If it were me, I would go with Superwinch # 1120210, for the fact that it has the ability to power the load in and out. The Master Lock winch...
view full answer... - Weight of Superwinch LT2000 # 1120210The Superwinch LT2000, part # 1220210, ships at about 19 pounds. Fully assembled and installed it's listed at 14.2 pounds from Superwinch.
view full answer... - Freespooling, Controlled Load 2,000 Pound Hand Trailer Winch RecommendationI spoke with my contact at Fulton about the F2 Fully Enclosed Trailer Winch with Adjustable Handle, # FW20000301. He stated that there is no minimum load required for the winch to operate. You can use it for controlled loads/unloads, but this winch is designed as a pulling winch, not for lifting, and is not meant to suspend loads. In its freespooling mode, the handle will still spin as the line is being pulled out. You might want to consider an electric winch like the Superwinch LT2000...
view full answer... - Replacement for Superwinch LT3000 Electric Winch With Same Mounting Bolt PatternWhile we do have a solution for you, the Superwinch LT2000 ATV Winch # 1120210 does not have the same mounting bolt pattern of 3" x 4-7/8" as your current Superwinch LT3000 # SW1130220. Similar winches that do have the same bolt pattern are the Superwinch LT4000 ATV Winch - Wire Rope # SW1140220 and the Superwinch LT4000SR ATV Winch - Synthetic Rope # SW1140230. I've added a link to a video review for you to check out as well.
view full answer... - Recommendation for a Winch to Load a Harley Davidson Motorcycle into a Cargo TrailerYou would need to consult a qualified welder to have a mount fabricated that will allow you rotate the handle 360 degrees on a hand winch. We do not stock any bolt on parts that are heavy enough to be used to mount a winch safely in this case, and you would need to tie the mount into the trailer frame for stability. We have a Universal Hand Winch Right Angle Mounting Bracket, item # DL24110, which would make the fabrication of the raised mount easier. An option I would look at, would be...
view full answer... - Installation of the Remote for the Superwinch LT2000For the Superwinch LT2000 ATV Winch # 1120210 we currently sell that winch kitted with the upgraded switch kit. This switch kit would attach to the handle bars on your ATV that you were using the winch on. If you are talking about the hand held remote for the Superwinch LT2000, it is no longer available from the manufacturer. To wire up the hand held remote you would route both the red and black wires from the winch to the remote, and from remote to the battery. Next install a circuit...
view full answer...
- Replacement Winch or Winch Motor For Raising/Lowering Roof on Rockwood Premier Pop UpIt is likely we have a motor to replace what has died. Can you offer any more information like a part number, manufacturer of the motor, etc? If you want to replace the entire winch system, then the Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs # 1120210 can be made to work with more than enough capacity to lift utilizing the pully system on your trailer.
view full answer... - Recommendation for a Trailer Winch to Pull a 1952 Chevy Pick Up onto a 22 Foot Car HaulerI would recommend a winch with a larger capacity than the Superwinch LT2000 Electric Utility Winch, # 1120210, that you referenced. A winch with a higher capacity is better than a getting one only to find out later that 2,000 pounds is not enough. I recommend going with the Bulldog winch, # BDW15017. It has a 3,400 pound capacity. You have to take into account the angle of your 22 foot car hauler as that will affect the load capacity. The best place to mount the winch is in a spot that...
view full answer... - Can The 7-Way On My Trailer Power The Superwinch LT2000 Electric Utility Winch, # 1220210The Superwinch LT2000 Electric Utility Winch, # 1120210, will need to be wired directly to the battery. You are correct the smaller gauge wire on the 7-Way plug will not be sufficient enough to handle the current of the winch. Two of the wires on the switch will connect to the winch. The other two wires on the switch will connect to the battery. The black wire will go to the negative side of the battery. The red wire will attach to the positive side of the battery using the included circuit...
view full answer... - Will Superwinch LT2000 Electric Winch # 1120210 Work on an TMS Electric Mobility Chair CarrierThe electric winch you referenced, Superwinch LT2000 Electric Utility Winch # 1120210, is a remote-control-equipped 12V winch with a 50-foot wire rope that has a line pull rating of 2000-lbs and a line speed of 2.5-feet/minute. This winch has more than enough capacity to pull your 250-lb Pronto electric mobility chair up the ramp of your mobility carrier. According to my contact at Superwinch, a better choice is a winch with a braking system, such as the Terra 2500, part # SW1125220. This...
view full answer... - Will Winch Mounting Kit for 2002 Arctic Cat 375 Work with 1200 lb Badland WinchCustom-Fit ATV Winch Mounting Kit, part # BDW15148, is made to provide a custom fit specifically for your 2002 Arctic Cat 375, but it is intended to provide a mounting surface for one of six different winches made by Superwinch. Those winch models are listed on the product page for the mounting kit. All of the winch mounting brackets we offer are designed for the standard electric winch mounting that will work with most winches. I researched images of Badlands winches in order to see...
view full answer... - Electric Winch Recommendation to Pull 1,500 Pound Logs onto a Utility TrailerSince you will be more or less dragging the log, you will want a winch with at least the capacity of the heaviest log, but I would go a little heavier than that to account for longer winching distances and flat terrain should you encounter it. A 3.4K winch like # BDW15018 would be a great option and you would have plenty of capacity. A winch with a higher capacity will not be working as hard as a lower capacity winch and it will last longer. I have also linked our FAQ on electric winches...
view full answer... - Where to Install Solenoid and Circuit Breaker for Superwinch LT 2000 on a 2010 Polaris Sportsman 500Typically, you will mount the solenoid and breaker under the seat where the battery is or on the frame in this same general area. I have included a link to a video showing a typical installation of Superwinch LT2000 on a 2012 Polaris that you can use as a guide.
view full answer... - Can Superwinch LT2000 ATV Winch be Wired Using a Factory Fuse on a 2014 Polaris Sportsman 400I strongly recommend using the circuit breaker since it will auto reset unlike a fuse that would blow and would have to be replaced. Also the winch # 1120210 was designed to be wired up using the circuit breaker and not for use with a fuse. I have linked the instructions and a video showing an installation of the winch for you.
view full answer... - Availability of Winch Mounting Plate to Install Superwinch LT2000 on 2008 Honda TRX 420 RancherThe Bulldog # BDW15114 winch mounting plate would be the correct winch mount for your 2008 Honda TRX 420 Rancher 4x2. It is indeed compatible with the Superwinch # 1120210 LT2000 you mentioned. I have linked you to an install video showing the same winch being installed on a 2011 Rancher.
view full answer... - Where to Attach Red Rocker Switch Wire on Superwinch LT2000When installing the rocker switch wiring harness, you need to use a wire that goes hot when the ignition switch is turned on. On my Polaris I used the wire that came from the accessory (cigarette lighter) plug because it is only hot when the key is turned on, this may be the case for you also. If not, you will need to use a circuit tester, part # PTW2993, if you need one, to determine which wire goes hot when the key is on. The reason for the wire being connected to the ignition is so...
view full answer... - Is there a Way to Lubricate Superwinch LT2000 ATV WinchI spoke with my contact at Superwinch about the LT2000 winch, # 1120210. He said that the gears are pre-greased but to regrease them you could take the covering off of the winch to access the gears. Clean off all of the old grease and then use wheel bearing grease such as # L11380, to grease the gears. There are no fittings on the outside of the winch to grease the gears. None of the other parts need to be lubricated.
view full answer... - Winch Mount for Superwinch LT2000 Electric Winch and a 2007 Yamaha Rhino 450 4x4Yes, you can use the Superwinch LT200 winch with your 2007 Yamaha Rhino 450 4x4. The custom mount you will need for your 2007 Yamaha 450 Rhino is the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15110. This will give you a perfect fit.
view full answer... - Can the Masterlock Electric Trailer Winch Be Used in Reverse to Pay Cable Out of the WinchFor powering loads in and out I recommend the Superwinch LT2000 Electric Utility Winch, 2,000 lbs, item # 1120210, which also includes a freespooling clutch for fast payout. The Master Lock Electric Winch,Trailer Winch, item # 2953AT, is designed for power load in only. I cannot recommend any modification or alternate use of the winch other than what the manufacturer recommends.
view full answer... - Superwinch LT2000 Winch has a 2,000 Pound Line Pull RatingThe Superwinch LT2000 Electric Utility Winch, 2,000 lbs, item # 1120210, has a 2,000 pound line pull rating. That means that as long as your boat and everything inside the boat weighs less that 2,000 pounds, he should be fine with this winch.
view full answer... - Need a Winch with Powered Wind and Unwind to Control A Vertical LoadPlease note that all winches we sell, whether manual hand-crank types or AC-powered units like the Dutton-Lainson StrongArm Electric Davit Winch # DL25032, are not to be used as hoists for lifting, supporting or transporting people, or for handling loads over areas where people could be present. This safety statement should be considered carefully as there could potentially be liability exposure if you use a product in an application specifically excluded by the manufacturer. Therefore...
view full answer... - Can Ignition Wire of Superwinch LT2000 Run to Main Power WireThe ignition wire of the # 1120210 is an activation circuit that normally is used when installing on an ATV to tell the winch the ATV is on and the winch is powered up. In a boat trailer install situation like you mentioned you could run this circuit to the same place as the main power wire and it will work just fine.
view full answer...
Do you have a question about this Electric Winch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Test Fit:
Nicholas E
Video by:
Andrew L
Updated by:
Laura H
Updated by:
Matthew S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina B.
6/29/2023
Usually it is a solenoid within the winch that has gone bad. Let me double check with the manufacturer, but we may need to get you a replacement solenoid.