Installation of the Remote for the Superwinch LT2000
Question:
How do you hook up the remote to the winch? Also were does all the wiring go to?
asked by: Tyrone
Expert Reply:
For the Superwinch LT2000 ATV Winch # 1120210 we currently sell that winch kitted with the upgraded switch kit. This switch kit would attach to the handle bars on your ATV that you were using the winch on.
If you are talking about the hand held remote for the Superwinch LT2000, it is no longer available from the manufacturer.
To wire up the hand held remote you would route both the red and black wires from the winch to the remote, and from remote to the battery. Next install a circuit breaker on the battery side of the red wire. This will connect to the positive battery terminal, the black wire will install to the negative battery terminal. I have included a diagram showing this for your reference.
If you are wanting to install with the upgraded switch kit, you will route the red and black wires from the winch to the solenoid. Then from the solenoid the black and green wires will connect to the switch, and the ignition of your ATV. Also connected to the solenoid are the red and black wires to the battery. Please note that a circuit breaker is included and required to be installed between the positive battery terminal and the solenoid. I have also included a diagram showing this installation for your reference.
I will be sending you a separate e-mail that will have both of the installation instructions options attached for you reference.
I have included a short video showing the installation on a 2012 Polaris Sportman with the upgraded switch kit for your reference.
Product Page this Question was Asked From
Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs
- Electric Winch
- ATV - UTV Winch
- 1-Stage Planetary Gear
- 1.0 HP
- 1001 - 2000 lbs
- 11 - 20 lbs
- Slow - 0 to 4 fpm
- No Remote
- Wire Rope
- Superwinch
more information >
Continue Researching
- Shop: Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs
- Article: Basics of Tie Down Straps
- Q&A: Wiring the Rocker Switch on the Superwinch LT2000 ATV Winch 1120210
- Q&A: How to Determine How Much Tire Capacity a Trailer Tire Needs
- Video: Superwinch Electric Winch - ATV - UTV Winch - 1120210 Review
- Q&A: Wiring Diagram for Superwinch LT3000ATV
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Kenda Karrier ST175/80R13 Radial Trailer Tire with 13" Black Mod Wheel - 5 on 4-1/2 - LR D
- Q&A: Difference Between Conventional and Modular Trailer Wheels
- Shop: Karrier ST175/80R13 Radial Trailer Tire w/ 13" White Modular Wheel - 5 on 4-1/2 - Load Range C
- Shop: Superwinch ATV Handlebar Switch Upgrade Kit for LT2000 Utility Winch
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" White Wheel - 5 on 4-1/2 - Load Range C
- Q&A: Where Does The Red Rocker Switch Wire Attach To When Installing SuperWinch LT2000?
- Video: Superwinch LT2000 ATV Winch Installation - 2010 Kawasaki Mule
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Search Results: ratchet straps
- Search Results: winch
- Q&A: Recommended Accessories for Superwinch LT2000 Winch part # 1120210
- Q&A: Rocker Switch Wiring for a Superwinch Terra Series ATV Winch
- Search Results: 7 pin
- Search Results: 7 pin replacement
- Shop: Fifth Wheel Hitch
- Video: Review of Superwinch Replacement Handheld Remote - SW48YR
- Video: Bulldog Winch Electric Winch BDW20101 Review
- Video: Superwinch Electric Winch SW2320200 Review
- Article: How to Wire an Electric Winch
- Search Results: akebrk~7r~sa
- Shop: Suspension Enhancement
- Shop: Vehicle Lights
- Video: Bulldog UTV or Utility Winch Installation - 2010 Polaris Ranger