Yes, we offer the Bestop Supertop for Truck 2 Collapsible Bed Cover # BE54UV, which is the confirmed fitting version of the # B76302 you were looking at. This collapsible cover offers complete coverage for your bed and can easily be taken down when you need to haul larger items. It has removable side and rear panels to give you easier access to your bed as well. view full answer...
It sounds like you are looking for a 1-1/4" class II hitch. The only hitches available for the 2022 Frontier are 2" class III hitches like item # e98869. Your Frontier has a higher capacity for towing than whatever vehicle you previously used your bike rack on so there are no lower capacity hitches.
You can still use your 1-1/4" hitch bike rack with your Frontier though. The etrailer Hitch item # e98869 has a 500 lbs tongue weight capacity. You can use an adapter like item # e58YR to... view full answer...
If your 2010 Nissan Frontier has stake pockets, the installation is relatively straight forward. If your stake pockets are not visible, there are usually plastic cutouts on to of the bed rails and your stake pockets are underneath those cutouts. If you do not have the cutouts, you will have to contact Nissan about your Frontier and ask how to get your stake pockets exposed. Once the stake pockets are exposed you can install the Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs,... view full answer...
The etrailer Trailer Hitch Receiver part # e98869 which is a fit for a 2012 Nissan Frontier works on all models including those with either a 5' or 6' bed. It simply bolts-on with no drilling required. It has a class III rating with 2" receiver tube opening. view full answer...
Yes, there should be no problem installing Access tonneau cover # A22030179 if you removed the sliding bed extender from your 2010 Nissan Frontier. The cover would be able to install like normal since the components associated with the extender would no longer be present. view full answer...
As long as your 2016 Nissan Frontier has a 2" hitch receiver like the # e98869, the Dallas Cowboys 2" NFL Trailer Hitch Receiver Cover # HTCC2008 will be a fit. This receiver cover will fit in any 2" x 2" hitch receiver and help keep your hitch free from scratches, dirt and will do a great job of helping reduce corrosion. view full answer...
I couldn't find any mention of a center mounted fog light, so if your 2013 Nissan Leaf is factory, there is a hitch that fits. If you're referencing an aftermarket center fog light, so long as it does not interfere with the frame under the bumper then the hitch will also fit. What you will need is the following:
- Curt Trailer Hitch Receiver # C11396
That'll give you the hitch, and if you also plan on doing some light towing you'll need a few other parts to complete the set up:
- Curt... view full answer...
What you need is the following part for your 2018 Nissan Frontier so you can use the Tekonsha Primus IQ Trailer Brake Controller # TK90160:
- Tekonsha Plug-In Wiring Adapter for Electric Brake Controller # 3050-P view full answer...
Yes, we have multiple installers that we can recommend all across the country. You can find them on the product page beneath the pictures where it says locate installers near me. You will be able to put in your zip code and find multiple shops in your area. The Draw-Tite Hitch item # DT23MR you were looking at has a 4 out of 10 on our difficulty to install scale and it should take someone with experience around 40 mins to install.
I can confirm that the Draw-Tite Trailer Hitch Receiver... view full answer...
Thanks for the picture! To tow a 5th wheel trailer with your 2021 Nissan Titan with a 57" bed you are going to need both a 5th wheel hitch and a rotating pin box. With that short of a bed a sliding hitch is not going to be enough to give you the clearance you need. As far as the rails in the bed of your truck go, those aren't for towing and you will need to remove them. To mount a 5th wheel hitch in your Titan you will need the Demco Hijacker Premier Series Above-Bed Base Rails and Custom... view full answer...
The Provider ST205/75R15 Radial Tire w 15" Viking Aluminum Wheel part # A15R45BMMFL will require a long style acorn lug nut, the Americana Trailer Wheel Lug Nut part # AM90049. This setup should work just fine with the CE Smith Offset Spare Trailer Tire Carrier part # CE27310G. view full answer...
Yep, you are on the money with the parts you need for an Inno square bar roof rack to fit your 2018 Nissan Versa Note:
- Inno Square Crossbars # INB127
- Inno Feet for Square Crossbars # INSUT
- Custom Fit Kit # INK421
Then to carry your surfboards I recommend the Inno Board Locker Surfboard Carrier # INA744.
I really like this carrier because of how simple it is to use and how well it keeps your surfboards secured on your rack. I've added a link to a video review for you to check out... view full answer...
Yes, the Rhino-Rack Ski and Snowboard Carrier # RR573 that you referenced has been tested by Rhino Rack and confirmed as a fit for the factory bars of your 2016 Nissan Rogue! I attached a review video for this carrier for you to check out as well. view full answer...
We do have one ladder rack that is compatible with your Bakflip G2, the Thule TracRac SR Sliding Truck Bed Ladder Rack, part # TH43002XT-501.
Rather than other ladder racks that clamp to the inside of the truck bedside, the side rails of the TracRac SR use the stake pockets to mount to the top of the bed sides leaving the inside of the truck bed side free for the tonneau cover.
You can see how the ladder rack works by using the provided link. view full answer...
Yes, you can use Thule EasyFold bike carrier # TH903202 with the Curt Class III trailer hitch on your 2012 Nissan Murano to carry your 2 electric bikes. This carrier has a 132 pound capacity (66 pounds per bike). I have included a link to a video review of this carrier for you. There are no electric connections for this carrier.
You should not need to add any other parts. The arms that hold the bike frames can move so the step-through frame design should not be an issue. view full answer...
The most cost-effective soft roll-up tonneau cover for your 2009 Nissan Frontier is the Tonno Pro Lo-Roll Soft Tonneau Cover part # TPLR-4005 for a 5' bed or part # TPLR-4010 for a 6' bed. If vehicle has a bed extender the spacer kit # TPLR-4092 must be purchased.
This cover mounts inside the bed rails of your pickup which makes it compatible with the Thule TracRac SR # TH43001XT-603 for 5' bed or # TH43001XT-600 for 6' bed.
The BAK Revolver is just preferred because you get a premium... view full answer...
The correct Curt Trailer Hitch for your 2012 Nissan Altima is the part # C11352 which is compatible with all sedan models including the 2.5 S. This is a Class I hitch with a 1-1/4" receiver which is smaller than the part # C13126 you referenced (which fits a Nissan Pathfinder), but unfortunately there aren't any Class III 2" receivers that fit your vehicle.
Attached is an installation video of the Class I hitch on a 2013 Altima for you to check out. If you let me know what you plan on... view full answer...
Yes, the etrailer Trailer Hitch Receiver # e98846 will fit your 2017 Nissan Rogue Hybrid model.
If you're planning on using this hitch for a bike rack I recommend checking out the Kuat Transfer V2 # KU84FR because it's easy to use and has a unique u-shaped frame that makes it easier to load and unload your bikes.
Attached is a review video of the rack and an installation video of the hitch on a 2017 Rogue for you to check out. view full answer...
Yes, the Lomax Hard Tonneau Cover # LOM95HR will fit with the Utili-Track System that you have in your 2022 Nissan Frontier PRO-4X 5' Bed. view full answer...
Go To Results