Expert Answers about Nissan Versa fit

Expert Answers about Nissan Versa

Is the Kuat Sherpa 2.0 a good fit for 2019 Versa Note?
For your 2019 Nissan Versa Note, I recommend starting with the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11378 you referenced. This hitch has a 4 inch measurement from the hitch pin hole to the outermost part of the bumper. The Kuat Sherpa 2.0 2-Bike Platform Rack - 1-1/4" Hitches - Tilting - Black # SH12B will be compatible. I personally like the Kuat Sherpa because of the wheel mounted hooks for no frame contact and a little more clearance from your bumper.
view full answer...

Recommended Hitch for a 2008 Nissan Versa Hatchback and Where to Get it Installed
The best hitch for your 2008 Nissan Versa Hatchback is going to be the Curt Trailer Hitch item # C11348 you were looking at. To get it installed you will want to scroll down the left side of the hitches product page and go below the pictures and videos. You will see a blue link that says Locate installers near me. Go ahead and click on this and put in your zip code and you will find a list of reputable installers near you. This is the highest capacity hitch available for your car. There...
view full answer...

Do all of the Hitches for the 2009 Nissan Versa Fit Both the Hatchback and Sedan
All of the hitches listed for the 2009 Nissan Versa (see link) will fit both the sedan and hatchback. Some items you may need to complete your towing setup with a Class I hitch are listed below. Drawbar # 3593 Pin and Clip # PC2 Wiring # C59496 Hitch Ball # 19256 or # 19258 Hitch Lock # e98879
view full answer...

Recommended Parts to Flat Tow a 2021 Nissan Versa
There's two different options to tow your 2021 Versa. If you have an automatic transmission it can't be flat towed and the only way to haul it behind an RV is to use a trailer or a dolly like the Roadmaster Tow Dolly with Electric Brakes item # RM-2050-1. If your 2021 Versa has a manual transmission you will need the parts listed below: Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable...
view full answer...

Will Draw-Tite Trailer Hitch # 24798 Fit a 2012 Nissan Versa Hatchback
Yes, the Draw-Tite trailer hitch # 24798 will fit the 2012 Nissan Versa Hatchback. I have included a link to the installation details for you to view. If your daughter plans on doing some towing, the correct ball mount is # 3593 and you can use pin and clip # PC2. For a 1-7/8 inch diameter ball, use # 19256, and for a 2 inch diameter ball use # 19258. For trailer wiring use # 118545.
view full answer...

Is 1-7/8 Hitch Ball Available for Curt Trailer Hitch for 2017 Nissan Versa?
There is a way to get a 1-7/8" Hitch Ball, you would simply order Curt trailer hitch # C11256 along with Ball Mount # C45520 and 1-7/8" Hitch Ball # C40001; you will also need Pin and Clip # F-4 to secure the ball mount. Please keep in mind this hitch is going to require the use of stabilizing straps # 18050 with all non-trailer accessories such as bike racks and cargo carriers in order to maintain the warranty. I've added a link to a demonstration video for you which shows you how the...
view full answer...

Will the Thule Passage 2 Fit on My 2009 Nissan Versa Hatchback?
I confirmed with Thule that the Thule Passage 2 Bike Carrier - Trunk Mount # TH910XT will fit on your 2009 Nissan Versa 5-DR Hatchback. In addition, we've also tested it on a 2009 Nissan Versa 5-DR Hatchback here at etrailer.com and it is compatible. If you want to ensure that no one will steal your rack or your bikes, I recommend the Thule Passive Security Strap for Trunk Mounted Bike Carriers # TH533 and the etrailer Cable Lock - 10' Long - 5/16" Diameter - Steel - Keyed Alike # e98891.
view full answer...

Will the Roadmaster Bulb and SOcket Tow Bar Wiring Kit Fit a 2011 Nissan Versa Hatchback
We have not had anyone come to us with specific problems related to a 2011 Nissan Versa hatchback and tow bar wiring kit # RM-155. There are some things about the bulb and socket kit that you need to be aware of. There is drilling involved with the installation of this kit. You have to drill into the back of the tail light housing to mount the bulbs. There needs to be enough space inside the housing for the bulbs to fit without melting the tail light lens. There needs to be 1/4 inch of...
view full answer...

Why Does 2011 Nissan Versa Sedan Have Exhaust on the Right Side and Hitches Are Made for Left Side
My technical contact at Draw-Tite informed me that Nissan had a design change for the 2012 model year that entailed moving the exhaust from the left to the right on the sedan models such as yours. If you check your VIN, your 2011 Versa 4 Door Sedan was probably built on the cusp and they built it as a 2012 instead of the 2011. The hitches that fit the 2012 sedans actually go over the exhaust and the exhaust needs to be temporarily lowered for trailer hitch installation. The Curt Trailer...
view full answer...

Are Trunk Mounted Bike Racks Available to Fit my 2013 Nissan Versa Sedan
I have attached a link to all of the truck mounted bike racks that have been confirmed to fit a 2013 Nissan Versa. You will just need to select the vehicle style to see the options that are available for your sedan. As for the book at the local dealer, we do not have, make, or print any type of book that is sent to dealers. You may have been looking at an outdated book from a specific bike rack manufacturer. Regarding the information on our site, it has been directly obtained from the...
view full answer...

Recommended Trailer Hitch for a 2012 Nissan Versa Hatchback
Yes, the Draw-Tite hitch item # 24798 will fit your 2012 Nissan Versa if you have the 5-door hatch back model. This hitch is custom fit and bolts directly to your Nissan with included hardware. You will also need a wiring harness to control your boat trailer's lights. The Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118545 fits the hatchback model. For a ball mount you'd need the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for...
view full answer...

Which 2 Bike Trunk Racks Will Fit On A 2009 Nissan Versa
I have included two links to the right. One is a list of trunk mount racks that fit the 2009 Nissan Versa sedan. The other link is for the hatchback models. Basically, all of the racks overlap in terms of fitting both the sedan and hatchback models. For an inexpensive 3-bike model you can use the Hollywood Racks Express, # HRE3. If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical men's bike would) then I recommend using bike adapter...
view full answer...

Will Curt T-Connector Trailer Wiring Harness Fit a 2008 Nissan Versa Hatchback
Yes the Curt trailer wiring harness # C56021 is listed as a fit for all models of the 2008 Nissan Versa including the hatchback. I have included a link to the installation instructions for you.
view full answer...

Cargo Carrier That Will Fit a 42" Long by 31" Wide Trike
Given the dimensions you mentioned I think you are referring to a cargo carrier rather than an actual trailer. We do have a couple options for you. The 32x48 Reese Solo Cargo Carrier # PS1040100 or the 32x48 Reese Steel Solo Cargo Carrier # PS10401-10402 if you want a ramp to make loading your trike easier. Both of these are 32" wide and 48" long.
view full answer...

Roof Rack for 5-Door 2008 Nissan Versa
There is an economical roof rack that will fit your 5-Door 2008 Nissan Versa, but the SportRack Semi-Custom Roof Rack # SR1008 is not a fit; it does not have the appropriate crossbar length Instead, I recommend the Inno Roof Rack which consists of Crossbars # INB127, Crossbar Feet # INSUT, and Fit Kit # INK313. This rack clamps to your Versa's roof and gives you the most economical rack available for your car; it has 50 inch square bars, a 120 lb capacity and even has locks to secure the...
view full answer...

Roof Rack Designed Specifically for 2018 Nissan Versa
I did some further research and found that SportRack does not have roof cross rails specifically fit for your 2018 Nissan Versa, that I could find, so I will not be able to recommend a solution with SportRack parts. However you could entirely scrap what you currently have and install a Rhino-Rack solution by ordering the Rhino-Rack Vortex Aero Crossbars # RRVA118B-2 along with the Rhino-Rack 2500 Series Legs # RRRLKVA, and Rhino-Rack # DK232 fit kit. This is a custom roof rack designed...
view full answer...

Roof Rack Recommendation For 2014 Nissan Versa Note
There are some Rhino-Rack roof racks that fit your 2014 Nissan Versa. The nicest are part # RR98GR in black. I like these racks because the bars don't stick out the sides of Versa for a nice, clean, factory look. The kit comes with everything you need to install except a measuring tape.
view full answer...

Fit of Thule Helium Aero 2 Bike Carrier # TH9042PRO on 2010 Nissan Versa
The Nissan Versa uses a Class I receiver, which is only capable of carrying two bikes due to the limited tongue weight capacity of the receiver. The Helium AeroPRO 3 Bike Model could certainly be used, but you would be limited to carrying two bikes when used in that receiver. To determine if the Helium is compatible with your Versa, you will need to measure the distance between the hitch pin hole in your receiver and the furthest rearward point of the rear bumper. If this distance is less...
view full answer...

Will Upgraded Circuit Protected Converter Part Work With Trailers with LED Lights
The portion of the product description you are referring to states that the trailer converter and wiring, part # 119178, should not be used with vehicles that are equipped with LED lights. Trailers equipped with LED lights are fine. Part # 119178 is fine for both your Altima and Versa as long as they are not equipped with LED tail lights and blinkers. The reason why it should not used with LED vehicle lights is because LEDs use much less current than incandescent bulbs. LEDs are new to...
view full answer...

Will Hollywood Racks Express Trunk Rack fit a 2008 Nissan Versa Hatchback
Yes, the Hollywood Rack trunk rack part # HRE3 that you referenced has been confirmed as a fit for your hatchback 2008 Nissan Versa. We haven't had the chance to install it on your specific vehicle and that is why we don't have a picture or a video that shows it on your vehicle. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Kuat Bike Frame Adapter Bar # UB01 to provide a horizontal top tube on your...
view full answer...