The B&W Companion # BWRVK3500 is designed to work in the B&W Turnover gooseneck ball # BWGNRK1012 that you mentioned was already installed in your 2013 Chevrolet Silverado 3500 Long Bed. You will pull the pin to remove the turnover ball and drop the Companion in and latch in place.
I recommend using a Lube Plate # RP83001 to extend the life of your hitch as well as quiet the ride. This will also make things a lot cleaner by not attracting dirt with regular grease. view full answer...
You can replace your busted standard water heater with a tankless water heater, and what you'll need to know is the amount of space you have in your cut out, as water heaters aren't specific fits for any make or model of trailer. The one I recommend checking out is from Fogatti:
- Fogatti RV Tankless Water Heater # LSB64FR
I like the Fogatti because it requires a smaller cut out of just 13" wide x 13" tall x 17-3/4" deep, but is still a powerful option, giving you up to 1-1/2 gallons... view full answer...
The 4,400lb axles will share some of the same components as the 3,500lb axles. It is a good idea to check your sizes ahead of time to ensure you get the exact product that you need(see article and picture). Here is what we show fitting your 2021 Grand Design Imagine XLS 24MPR Toy Hauler.
Inner Bearing # L68149
Inner Race # L68111
Outer Bearing # LM67048
Outer Race # LM67010
Grease Seal # RG06-050
You can still search by your travel trailer just know that since manufacturers don't exactly... view full answer...
The Rhino-Rack MountainTrail Rooftop Bike Carrier - Fork Mount # RBC035 you were looking at will fit the Yakima JetStream Crossbars on your 2014 Chevrolet Cruze perfectly, and is a great option to carry a bike with your Cruze.
I included a video of the # RBC035 on a 2015 Chevrolet Cruze for you to take a look at. view full answer...
That's quite the journey you took us on there and I have to say, I've never heard of an issue with the trailer side plug not fitting the Curt Echo Wireless Trailer Brake Controller # C51180.
So I called Curt to see if this is an issue at all with the Echo, and was told it was not, and that there were just a couple of reasons why the Echo would not fit. One was if your trailer did not have a standard 7-way plug, though that seems unlikely, as I did just take a look at the Geo Pro and from... view full answer...
The correct Blue Ox TrackPro weight distribution for your camper that has a GVWR of 7,815 lbs is going to be the option for the tongue weight between 800 lbs to 1,000 lbs. The reason for that is the weight distribution hitch you want is one that is rated for the tongue weight of your fully loaded and ready to go trailer, and since loaded tongue weight is generally in the 12 percent or so range, I'm guessing the trailer was not fully loaded.
In regards to the correct shank, that will just... view full answer...
To add 7 pole to your 2017 Porsche Macan S, since there is not an OEM wiring harness that is compatible and you have to use Item # 119250KIT, I recommend adding Item # ETBC7L. This kit plugs directly into your four pole plug and comes with everything to connect to the battery. This kit also allows you to use a wireless brake controller like Item # C51180. Using a wireless brake controller does not require you to run any additional wires to the inside of the vehicle. view full answer...
Yes the Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211 that you mentioned would work great on your 2016 Little Guy Silver Shadow 5x10 as it would fit to it easily and also has enough weight capacity. This also would handle the slight incline you mentioned as well. view full answer...
The Curt Trailer Hitch Receiver part # C13329 is a great option for a 2020 Kia Niro, the only available with 2" receiver tube opening. This will allow for carrying up to 4 or 5 bikes as the weight capacity for this is 525 lbs. The vehicle may have a separate rating for tongue weight and if this is lower that's what you'll need to abide by but I still think four bikes sounds reasonable for this application. view full answer...
The Pop&Lock # PAL9772 will fit a hard fiberglass tonneau cover that meets the following parameters:
• Fits fiberglass tonneau covers on vehicles with power door locks
• Tonneau cover must have a 1-1/8" center hole for a rotary latch
• Tonneau cover must have a cable-latch assembly
If your Unercover Lux bed cover meets those stipulations, the # PAL9772 will work. view full answer...
I took a look at each hitch for your 2002 Ford F-350 Super Duty, and was able to find one option for a Class V hitch that will work with a spare tire, and is near flush with your bumper, which is the Draw-Tite Trailer Hitch Receiver # DT45508.
This hitch will require you to remove your factory hitch, and in regard to keeping it tight to the frame, the brackets are, but the hitch tube is below the bumper (I'm not sure if by "tight to the frame" you meant you wanted the crosstube to be concealed).... view full answer...
I have some good news for you because the Freedom rack does have a compatible swing-away adapter that you can use. So what you will need are the following:
- Saris Freedom 4-Bike Platform Rack # SA4414B
- Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches # Y02483
These two are compatible because the BackSwing is designed for bike racks with dedicated 2 inch shanks, which the Freedom # SA4414B has, and the BackSwing also has a total load capacity of 250 lbs, which... view full answer...
If you don't have a spoiler, the Thule Passage # TH911XT will fit your 2014 Jeep Grand Cherokee. If you do have a spoiler, there is not Thule Option, BUT the Yakima HangOut # Y02638 will! To me, trunk mounted bike racks are pretty much the same in most cases, The HangOut is a great rack that has the same features and the Thule, just a bit different design. view full answer...
Good question, and thankfully many weight distribution shanks from different manufacturers are interchangeable so long as they have the proper hole spacing. This Reese shank does have the correct hole spacing to work with the Curt TruTrack so yes, your TruTrack weight distribution system is absolutely compatible with the Reese shank:
- Reese Weight Distribution Shank for 2" Hitches # RP69FR view full answer...
I recommend the Karrier ST205/75R15 Radial Trailer Tire # AM10245 to replace the tires on your Aluminum Lynx Trailer Wheel. These tires come with a 1-year worry free guarantee that will replace the tire if it is damaged during the first year. It the carries a prorated warranty for the remaining 4 years of the warranty term. view full answer...
For your 2013 Chevy Equinox you'll want the Roadmaster Direct-Connect Base Plate Kit - Removable Arms Item # RM-523160-5. These base plates will connect to your Roadmaster Sterling All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 8K Item # RM-576 and the removable arms will provide a clean and unobtrusive look when not in use.
To flat tow your 2013 Equinox you'll also need a braking system, tow bar wiring kit, and safety cables. I have the following recommendations for... view full answer...
This depends solely on what you're trying to power with the Go Power Industrial Pure Sine Wave Inverter - GFCI - 2,000 Watt - 12V Item # 34278156. It can go up to 2000 watts in running power but you'll most likely be pulling less. The higher the power draw the higher the length of time needed the higher battery amp hour you'll want. If you're planning on running solely off of battery power you'll need to add up the average amperage used in an hour for all of your appliances that will be... view full answer...
To replace your MORryde 1116 bolt pattern pin box with the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter # RP85FR you'll just need the Spacer Kit for Rotating Turret for 5th Airborne and Sidewinder 5th Wheel King Pins Item # RP61301. This space kit is listed under Reese's website as being the compatible fit for this conversion. The 2 x 2 bolt setup is correct for the # RP85FR. view full answer...
Getting the brake lights to work will depend on if your brake lights and turn signals are wired separately. As the # HM20049 isn't working properly, this is most likely what is going on.
You will need to install the Roadmaster Brite-Lite Wiring Converter # RM-732 to get the brake lights working properly. This will convert your 3 wire electrical system on the truck to a 2-wire system on the trailer. view full answer...