We can get your 2019 Nissan Pathfinder set up with a trailer wiring harness to go along with the Draw-Tite Max-Frame Trailer Hitch Receiver # 76031. The best option is the harness from Tekonsha because they make the most reliable trailer wiring harnesses, and because it has the highest amp rating, which means it gives you the best prevention against potential shorts. The harness that fits your 2019 Pathfinder is the following:
- T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector... view full answer...
While I wasn't able to find the dimensions of what the Marco saddles fit, I can tell you that Thule square crossbars are a different size than the crossbars on the Malone MicroSportXT Trailer # MPG460XT.
The MicroSportXT has crossbars that measure 1-1/4" x 1-1/4" square, while the Thule square bars (which are really rectangles) measure 1-1/4" wide x 7/8" tall. So if your Marco saddles are able to accommodate the slightly larger height, they will work on the square crossbars of the Malone... view full answer...
Yes, the hands free liftgate feature on your 2018 Nissan Pathfinder will still be functional with the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76031 installed. However, in order to activate this feature you will need to place your foot on either side of the receiver tube opening which I have attached a photo of for you. This will be the case for the majority of vehicles with the hands free liftgate feature like your Pathfinder.
The Draw-Tite Max-Frame Trailer Hitch Receiver is... view full answer...
The bearings included with the Dexter 3,500 pound hub and drum assembly you are looking at are inner bearing L68149 and outer bearing L44649.
The inner diameter of L68149 is 1.378 inches. The inside diameter of L44649 is 1.063 inches. These measurements are close to but not the same as 1-3/8 inches or 1-1/16 inches. To measure bearings properly you will need a more precise tool for measuring like a dial caliper.
Part # 84546UC3 appears to be the right hub and bearing kit using your measurements.... view full answer...
If your 2013 Nissan Pathfinder is equipped with a rear spoiler, and from my research it most likely is, you might want to consider the Hollywood Rack Over the Top # HRF2. Currently we only have this bike rack in 2 bike configuration. This bike rack is one of our newest products and is specifically designed to be used on vehicles with a rear spoiler. The design of this trunk mounted bike rack reduces the stress that can be placed on the rear spoiler when using a trunk mount bike rack.
The... view full answer...
I confirmed with Thule that the Thule Evo Raised Rail Feet # TH710401 you were looking at for your 2012 Nissan Pathfinder will fit the raised factory rails perfectly.
There are two crossbar options compatible with these feet, the 47" square bars # TH712200, or the 47" WingBar Evo Aero Bars in silver # TH711200, or black # TH711220.
I recommend going with either of the WingBar options as they have the top channel to allow you to use channel mounted accessories instead of just using certain... view full answer...
When we installed the Draw-Tite # 76031 and Curt # C13309 trailer hitch receivers on a 2018 Nissan Pathfinder - which is the same body as a 2019 Pathfinder - we found that the Draw-Tite had both better ground clearance and better bumper clearance.
The Curt measured 14 inches from the ground to the top of the hitch with 5 inches from the hitch pin hole to the end of the bumper, while the Draw-Tite measured 14-1/2 inches from the ground and 4 inches from pin hole to the end of the bumper.
Due... view full answer...
When it comes to transmission coolers and whether or not they fit a vehicle you simply need to make sure that you have enough room for the cooler. We only have certain transmission coolers listed as a "fit" if we have actually installed it ourselves or have heard from a customer that they got it to fit.
Since the Derale Series 8000 Plate-Fin Transmission Cooler Kit # D13504 fit a 2005 Nissan Pathfinder (as you can see in the installation video that you referenced), then it should fit your... view full answer...
I looked at some pictures of the current generation Nissan Pathfinders and it should fit. I would do some measuring first. Check to make sure the cross bars are spaced between 20 inches and 37 inches apart and the Thule # TH859XT will work great for you.
This rack is 40 inches wide and it sits on top of the crossbars. See what you think about your tall sides. view full answer...
Sí, el enganche Draw-Tite Clase III que mencionaste, pieza n. ° 76031 es adecuado para un Nissan Pathfinder 2014. El Tekonsha # 118670 es el arnés de cableado de remolque de 4 pines correcto para su vehículo.
También necesitará el soporte de bola n. ° 2751 y una bola de remolque n. ° 19260 de 1-7 / 8 pulgadas o una bola de remolque n. ° 63845 de 2 pulgadas.
He vinculado para instalar videos para el enganche y el arnés de cableado del remolque.
Translation:
Yes, the Draw-Tite Class III... view full answer...
The SportRack Vista XL Cargo Box, # SR7018, has not been confirmed to fit the factory crossbars of your 2013 Nissan Pathfinder, but you can take a few measurements of your roof rack to determine if it will fit. The mounting hardware of the Vista XL will fit crossbars up to 3-7/8 inches wide x 1-1/4 inches tall. It also requires a crossbar spread between 23-5/8 inches and 34 inches. The crossbar spread is the distance between the front and rear crossbar on center.
If these dimensions do... view full answer...
I do have some information that will help determine if the Evolution 1800 cargo box will fit on your 2013 Nissan Pathfinder, however, the Evolution cargo boxes were discontinued by Thule so they do not have any fit information for this cargo box and your 2013 Nissan Pathfinder.
The mounting hardware that came with the Evolution cargo boxes will fit on crossbars up to 3-1/4 inches wide and up to 2 inches tall. The minimum crossbar spread that is acceptable for the Evolution 1800 is 23-5/8... view full answer...
I may have an option for you, but at this time there is no rear suspension enhancement confirmed to fit your 2014 Infiniti QX60, and even though it is similar to a 2014 Nissan Pathfinder the suspension enhancement for options like the Firestone # F4118 you were looking at is not confirmed to fit.
Instead there are universal options like the Coil SumoSprings # CSS-1094 which fit in-between the middle coils of your rear coil springs and give your suspension additional support to prevent... view full answer...
I confirmed with SumoSprings that the # CSS-1195R will fit the 4 wheel drive models of the 2020 Nissan Pathfinder, but it will not fit the 2 wheel drive models, unfortunately.
However, the Firestone Coil-Rite Air Helper Springs # F4118 will fit your 2 wheel drive. This is also fully adjustable and will be the better option, in my opinion. view full answer...
The etrailer.com Trailer Hitch Receiver part # e98908 which is a fit for a 2019 Nissan Pathfinder does not have any sort of integrated trailer connector mounting bracket nor is there a similar option for the Pathfinder with this feature. However, you can use the Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors part # C58000 which will provide an easy to access spot to mount the trailer connector. That said, the options are limited for trailer connector mounting... view full answer...
In order to use the 7- and 4-Pole Trailer Connector Socket part # HM40975 on a 2018 Nissan Pathfinder you'll also need the T-One Vehicle Wiring Harness part # 118273. The trailer connector would simply need to be swapped but you cannot purchase the kit without it. view full answer...
For deep step through frames or alternative frame designs you would need to use an adapter bar such as # 64005 to be able to mount the bike on a two-arm bike carrier such as the Thule OutWay # TH45JV.
I have to use these adapters and without them my wife's bike would be at a severe angle and I would not be able to load my son's bike at all. I have linked a video showing how the adapter works. view full answer...
The Tekonsha Prodigy RF Wireless Trailer Brake Controller, # TK94FR, will work on your 2015 Nissan Pathfinder. The listed fit on this product page is not exhaustive but includes many systems that are difficult to hardwire a brake controller, making a wireless option ideal.
This Tekonsha Prodigy wireless system will work on most vehicles, but does require a 7-way trailer wiring connector. If your 2015 Pathfinder doesn't have a factory 7-way connector, I'd recommend using our Universal... view full answer...