bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Nissan Rogue


  • Does Kuat Switch Ski Rack Lock to Prevent Theft
  • Correct, there is not a locking deterrent to your roof rack for the Kuat Switch 4 Ski and Snowboard Carrier - 4 Pairs of Skis or 2 Boards # KU94FR. The Switch does have a lock for the skis/boards as they are in the carrier, but not for the rack itself. This does fit your Malone aero roof rack, but if you want a ski carrier that locks to your roof rack, you would need either the Kuat Grip Ski and Snowboard Carrier # GRR4B or Thule SnowPack Ski and Snowboard Carrier # TH7324. Like the Switch,...
    view full answer...

  • Size Bolts Used to Install Draw Tite Hitch on 2014 Nissan Rogue
  • The Draw Tite hitch part # 75902 uses bolt size M12 x 1.25 x 35mm CL8.8. We also sell replacement hardware kits for the hitches we offer with the part # RHK.
    view full answer...

  • Does etrailer Hitch # e98846 Fit 2008 Nissan Rogue S
  • We confirmed with the manufacturer that the hitch # e98846 does fit all models of the 2008 Nissan Rogue including the S model like you have so it would work well for you.
    view full answer...

  • Will Malone AirFlow2 Roof Rack And Thule Compass Fit On 2018 Nissan Rogue With Raised Rails?
  • We tested the Malone AirFlow2 Roof Rack - Aero Crossbars 50" # MPG215 on a 2018 Nissan Rogue with raised roof rails like yours, and it had 2-3/4" of space between the roof and the bottom of the crossbar. That is plenty of room for the Thule Compass Kayak and SUP Carrier w/ Tie-Downs # TH890000 to be installed as the Thule Compass brackets are not very large. I attached a couple demonstration videos for you.
    view full answer...

  • Is there a Hitch for a 2019 Nissan Rogue Special Edition?
  • Yes, the etrailer Trailer Hitch Receiver item # e98846 fits all models of the 2019 Nissan Rogue including the special edition. This hitch is custom fit and bolts directly to your frame with included hardware. It installs in preexisting holes and does not require any drilling or welding. I have linked an installation video and attached a picture below so you can follow along with the process and see the final product. If you need a wiring harness to control your trailer or accessories...
    view full answer...

  • Will Draw-Tite Class III Receiver 75902 for a 2009 Nissan Rogue also Fit the 2011 Model
  • The Draw-Tite Trailer Hitch Receiver you referenced, part # 75902 will fit a 2011 Nissan Rouge with the exception of the Krom model. The Krom model has a different exhaust and rear fascia that would interfere with the placement of the hitch. To see the install instructions for this receiver, click on the provided link.
    view full answer...

  • Will Curt Class III Trailer Hitch C13204 Fit a Nissan Rogue With a Decorative Splash Panel
  • Some models of the Nissan Rogue have underbody panels that will need to be removed to install the Curt Class III Trailer Hitch, # C13204. The underbody panels will not be reinstalled. The panels must be removed to expose the attachment points for the hitch at the frame rails. These panels are not visible unless you are under the vehicle. I have attached a link to the installation instructions and an installation video that shows our technician removing the underbody panels for you to...
    view full answer...

  • Draw-Tite Class III Hitch for 2019 Nissan Rogue
  • The Draw-Tite # 75902 is a verified fit for your 2019 Nissan Rogue. I have included a link to the hitch and a link to the full install instructional video. I have also included a picture so you can see what this hitch might look like on your Rogue. Even thought the capabilities of this hitch far exceed your Rogue's abilities you will still benefit from the enhanced stability of the 2" receiver and that there are more accessories available (like bike and cargo racks) for a 2" receiver. If...
    view full answer...

  • Can A Canine Cargo Cover for 2015 Nissan Rogue Work With A Split Back Seat
  • The Canine Cover like # DCL6371TN is custom made to fit your 2015 Nissan Rogue. So, if you have a split bench seat in your 2015 Nissan Rogue, then the cover will be made with a split in it to allow for one seat to fold down. The the split in the cover is held together with velcro when both seats are in the upright position. When you need to fold a seat all you need to is separate the velcro and fold the seat down. I have attached a link to a video that shows one of these covers for...
    view full answer...

  • Differences Between Trailer Idler Hubs With a 5 on 5 Bolt Pattern
  • Each of the trailer idler hubs with a 5 on 5" bolt pattern are a fit for 3,500 lb axles and use inner bearing # L68149 (1.378" inner diameter), outer bearing # L44649 (1.063" inner diameter), and grease seal # 58846 (1.719" inner diameter) so you will want to make sure those are the correct bearings and seal for you. You can do this by taking apart your current hub and looking at the bearing numbers, or by using Digital Caliper # 301-17068 and measure your spindle to the thousandths of...
    view full answer...

  • Recommended Roof Rack and Kayak Carrier For 2014 Toyota Avalon To Carry 2- 45 Lb Kayaks
  • I recommend to use the Inno Aero Crossbars part # INXB130-2 with feet part # INXS250 and fit kit part # INK578. The Inno roof rack can be used on the naked roof with sunroof as long as you don't open the sunroof when the rack is installed to avoid possible damage to the kayak carrier, sunroof and prevent unbearably loud wind noise. For the Kayak carrier, I recommend the Malone Stax Pro2 Kayak Carrier w/ Tie-Downs - Post Style part # MPG115MD which will allow you to carry the 2 kayaks....
    view full answer...

  • Wind Fairing for Malone AirFlow2 Roof Rack With 58 Inch Crossbars
  • The clamps for the old Thule XT fairings have been discontinued, and there are no adapters that are designed to work with your Malone AirFlow2 Roof Rack # MPG216 with 58" crossbars, so the best option really is a new wind fairing. I recommend measuring the distance between the feet of your Malone AirFlow2 roof rack to ensure a fit, and so long as they are 43" or less apart the wind fairing I recommend is the 50" Rhino-Rack Fairing for Roof Racks # RRRF4. I have added links to a video...
    view full answer...

  • Brackets Needed To Move 6401 Firestone Ride Rite Bags To 2012 Ram 3500
  • Yes, the Ride-Rite air bags for the 2000 Ford F-250 are 6401 air bags and can be reused on the 2012 Ram 3500. I do recommend to check your air bags to make sure the side of them says 6401 just to be sure. The number is stamped on the side of the air bags like in the photo shown. I have listed the parts needed to install the 6401 bags on the 2012 Ram. Brace Bracket- # F5758 Replacement Bracket- # F5757 Replacement Lower Bracket - # F5370 Replacement axle clamp- # F5181 Replacement Bail...
    view full answer...

  • Availability of Ball Mount for a 2011 Nissan Rogue with a Factory Installed Towing Package
  • The factory towing package on a 2011 Nissan Rogue uses a Class I 1-1/4 inch hitch. A Class I hitch will need to use the recommended ball mount for that particular hitch. All Class I trailer hitches are tested and rated with the specific ball mount for that hitch. Using a ball mount that is not recommended by the manufacturer will void the warranty. The recommended ball mount will have the correct rise or drop that is needed for towing with your factory hitch. If you know the rise or...
    view full answer...

  • Install Instructions Link for Curt Trailer Wiring Harness # C44ER for 2021 Nissan Rogue
  • While we don't have an install video for the Curt harness part # C44ER on a 2021 Nissan Rogue like yours I did attach an install instructions link to this page that shows the entire process walked through.
    view full answer...

  • Inno Wedge Cargo Box for 2018 Nissan Rogue
  • The Inno Wedge 660 Rooftop Cargo Box # INBRM660BK will fit on your 2018 Rogue as long as it has roof rack crossbars that are spaced apart between 24- and 39-inches. The linked diagram shows the crossbars' maximum compatible size as well as the spacing needed at the rear of the SUV for the hatch to open fully. The Wedge's mounting hardware fits on all bar shapes and the box includes a lock. You can see one installed on a Rogue by viewing the linked video. For rooftop cargo carriers of...
    view full answer...

  • Will Yakima HangOut 2 Bike Rack Work with 2015 Nissan Rogue
  • The Yakima HangOut 2 Bike Rack - Trunk Mount # Y02637 is not a confirmed fit for your 2015 Nissan Rogue. I've linked the page to other options confirmed to fit. With a hanging style bike rack, you often will need the bike adapter bar like # 64005 to give you a level transport by creating a top frame rail between the seat post and handlebar.
    view full answer...

  • Will a Bigger Transmission Cooler Fit on My 2015 Nissan Rogue?
  • Both transmission coolers parts # D13503 and # D13501 work for your 2015 Nissan Rogue SV. Transmission coolers aren't vehicle specific so I always suggest to get the biggest cooler you can fit. The bigger cooler has more surface area to cool the transmission fluid and there is no problem with having cooler fluid. You need to test and see if there is enough room for the bigger cooler to be installed. To test the fit, I suggest using cardboard and making a mock up cooler. The dimensions...
    view full answer...

  • Will Carpod M2205 Walled Cargo Carrier Fit on a 2017 Nissan Rogue
  • It very likely will, but it will depend on how far the hitch is recessed under the vehicle. The Carpod # M2205 needs a minimum of 6-1/2 inches between the hitch pin hole and the furthest rearward part of the rear bumper in order to be slid into the receiver far enough for the hitch pin to be installed. I assume you already have a hitch installed, so you can quickly determine this by having a helper stand up a yard stick or other long, straight object flat against the rear face of the bumper....
    view full answer...

  • Will the Thule Gateway Pro 3 Bike Rack Fit My 2015 Nissan Rogue?
  • Since there isn't a trunk mounted bike rack that fits your 2015 Nissan Rogue (including the Thule Getaway Pro 3 Bike Rack # Th78VR you referenced) due to the spoiler, your best option is a hitch mounted bike rack. For that, the first thing you need is a hitch like the etrailer 2 inch hitch receiver # E98846 for an easy and secure place to mount the bike rack. A great bike rack we carry that has been confirmed to fit this vehicle is the Thule Helium Pro 3 Bike Rack - 1-1/4" and 2" Hitches...
    view full answer...