Expert Answers about Nissan Pickup
- Troubleshooting Curt T-Connector Wiring on a 1995 Nissan Pickup
- The first thing to check on your Curt T-Connector # C55353 is the ground; you want to make sure it's securely connected to a clean, bare-metal surface. If that's the case then you need to test the functions of the wires going into and coming out of the module with a circuit tester like part # PTW2993.
If what you test doesn't match what is mapped out on the control module then it means the module is bad and you need to get it replaced. Since this has a 1-year warranty I recommend pursuing...
view full answer... - Suspension Enhancement For 1997 Nissan Pickup Lowered by 4 Inches
- The Timbrens definitely won't work on your 1997 Nissan pickup that has been lowered 4 inches, that's nearly the length of the spring and they can't compress that much. The only option for your '97 Nissan to help when loaded is the RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS2511.
This will help your Nissan stay level level out and give you improved handling. Normally when you are towing or have a heavy load in your truck bed, your factory leaf springs flatten, causing...
view full answer... - Installation Instructions For The Blue Ox BX1812 Baseplate For A 1997 Nissan Pickup
- I went out to our warehouse and took some pictures of the Blue Ox Base Plate Kit - Fixed Arms # BX1812 and the included installation manual.
view full answer... - Westin Bumpers for 1996 Nissan Pickup that Work with License Plate Light Kit 00007153
- The Westin Replacement License Plate Light Kit for Westin Bumpers # 00007153 is made to work with specific Westin aftermarket bumper products, those in their Diamondstep, Surestep or Perfect Match series. It works with all Diamondstep and Surestep bumpers and the Perfect Match bumpers 31000, 31001 and 32000.
The linked page shows all four currently-available Westin bumpers that fit your 1996 Nissan pickup, parts # 66001-95300, # 66000-95300, # 76000-95300, and # 76001-95300.
All of these...
view full answer... - Installation and Fit of the Westin Diamondstep Replacement Step Bumper on a 1987 Nissan Pickup
- The Westin Diamondstep Replacement Step Bumper, item # 66000, does not come with installation hardware and is designed to be installed with the Westin Installation Mounting Kit for Diamondstep and Surestep Replacement Bumper, item # 95300. Lights and wiring can be purchased separately, the Westin Diamondstep, Surestep and Surestep Deluxe XLT Bumpers License Plate Light Kit, item # 00007153, is the correct kit for this bumper.
The Westin Diamondstep Replacement Bumper with Custom Install...
view full answer... - Will My Tow Bar Cross Bar Work with a Roadmaster Base Plate Kit # 317-2 on a 1997 Nissan Pickup
- If the tow bar you have is a Roadmaster tow bar or you have a cross bar adapter to Roadmaster base plates then, yes, the Roadmaster Classic Base Plate Kit, item # 317-2, for your 1997 Nissan Pickup will work with it. You will most likely need a set of car side quick disconnects, item # RM-222, to connect the cross bar to the base plates, if you did not retain the car side brackets from your 1991 Nissan.
If you have a different brand of tow bar, and do not have a Roadmaster tow bar adapter,...
view full answer... - Will the Blue Ox Base Plates for a 1988 Honda Civic Fit a 1997 Nissan Pickup 2WD
- The Blue Ox Base Plate Kit, # BX1812, that you referenced on our website will fit on your 1997 Nissan Pickup 2wd, however, it will not fit on a 1988 Honda Civic.
If you have the Blue Ox Base Plates, # BX2211, for your 1988 Honda Civic, then no, they will not fit on a 1997 Nissan Pickup.
A few other items that you will need to flat tow your Nissan Pickup, if you do not already have them, are a tow bar, safety cables, light kit and supplemental braking system.
The tow bar that I would...
view full answer... - Can a Rear Mount Trailer Hitch be Used on the Front of a 1996 Nissan 4x4 Pickup Truck
- I do have a solution for you but you will not be able to use a rear mount hitch on the front of a vehicle. Some trailer hitch manufacturers we carry do not give us the hitch dimensions because it is proprietary information.
But I can tell you that the hitches you have listed are not going to fit at the front of your 1996 Nissan pickup. The frame is narrower at the front but beyond that it would require modification to the hitch and/or the vehicle that would void the hitch warranty and...
view full answer... - Will a T-One Harness with Modulite On a 1995 Nissan Pickup Work With LED Trailer Lights
- You would need to use part # HM43505 to wire your 1995 Nissan pickup for towing. It includes the necessary taillight converter to make your trailer lights work correctly. You would not need to purchase any other type of wiring, unless you needed to adapt the 4-Way plug to a 5, 6, or 7-Way plug.
This part will not cause problems with LED trailer lights. Please note, that it is not suggested to mix LED and incandescent lights on the trailer.
view full answer... - Replacement Bumpers for a 1997 Nissan XE Club Cab Pickup Truck
- Westin replacement bumper # 66001-95300 is one option for your 1997 Nissan Pickup truck. It does come with a custom installation kit and license plate lights and wiring. The chrome option is # 76001-95300.
We also have # 66000-95300 and # 76000-95300 as options. All come with installation kits and the lights/wiring.
view full answer... - Tonneau Cover Options for a 1985 Nissan 720 King Cab 6' Bed
- Yes, the Pace Edwards JackRabbit Hard Tonneau Cover part # 311-JRN1001 will in fact fit your 1985 Nissan 720 King Cab. The cover is made of a weather-resistant, padded ArmorTek deck laminated to rigid aluminum panels and has drain tubes at the canister to prevent water from entering the truck bed.
I have attached a list of all the tonneau covers we have confirmed to fit your truck at this time for you.
view full answer... - Will this Modular Trailer Wheel Fit a 1993 Nissan D21 2WD Pickup Truck?
- The Lionshead Steel Modular Trailer Wheel - 15" x 6" - 6 on 5-1/2 - Silver # LHHA312 may fit on your 1993 Nissan D21 2WD pickup, but it is not designed for this use. Before using this wheel in that way, you will want to make sure you have a zero offset on your current truck wheels. Trailer wheels often use a zero offset, like this wheel does, for wheel and tire clearance when on a trailer. It is not uncommon for vehicles to have a decent offset.
An offset is how far the actual mounting...
view full answer... - OEM Replacement Mirrors For 1997 Nissan Pickup
- We do have replacement manual mirrors for your 1997 Nissan Pickup with the following:
- Driver: K-Source Replacement Side Mirror # KS68002N
- Passenger: K-Source Replacement Side Mirror # KS68001N
If you were referring to electric, that was discontinued by the manufacturer.
view full answer... - Bumper Fits for 1997 Nissan Pickup Truck
- We do have a couple of different options for bumpers that fit your 1997 Nissan pickup, both of which are from Westin and both of which come with mounting brackets. They are also available in your choice of either chrome or black.
- Westin Fey Diamondstep Rear Bumper with Custom Installation Kit - Black # 66000-95300 or Chrome # 76000-95300
- Westin Fey Surestep Rear Bumper with Custom Installation Kit - Black # 66001-95300 or Chrome # 76001-95300
These are very similar step bumpers...
view full answer... - Towing Capacity and Parts Needed to Tow a Trailer with a 1996 Nissan Pickup XE
- In order to tow a trailer with your 1996 Nissan Pickup XE, you will need a trailer hitch, trailer wiring harness, ball mount, and a hitch ball. For a trailer hitch I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75186 which is a Class III hitch with a 2" receiver tube opening. This is also the most cost effective hitch we have confirmed to fit your truck.
For a trailer wiring harness, theHopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector...
view full answer... - Replacement Bumper for a 1986 Nissan Pickup Manufactured After 1986.5
- Both of the Westin Fey Replacement Bumpers offered for your Nissan Pickup will work for vehicles manufactured after mid year 1986. Part # 76001-95300 is the chrome Surestep Bumper, and part # 76000-95300, the Westin Fey Diamondstep would both be a fit and would work great on your Nissan.
view full answer...
Go To Results