Expert Answers about Nissan Altima
- What Second-Row Floor Liners do You Recommend for My 2013 Nissan Altima?
- For great tan 2nd row mats, I recommend the WeatherTech 2nd Row Rear Auto Floor Mat - Tan # WT454662. The fit of this mat is a one-piece solution. It is constructed with features that securely grip the floor to prevent shifting. Also, the great thing about WeatherTech mats is that they come with a lifetime warranty.
It is important to note that these mats are only for sedan models.
If you have a coupe model, I recommend WeatherTech 2nd Row Rear Auto Floor Mats - Tan # WT451183.
view full answer... - Using the Kuat Sherpa on a 2011 Nissan Altima
- The Kuat Sherpa, part # SH12B will be compatible with your 2011 Nissan Altima. Be aware that the rack weighs 32 pounds, and your tongue weight capacity will need to include the weight of the bike rack in your capacity.
view full answer... - Will the Thule X2 Pro XTR Work on a Class I Hitch?
- I have a great solution for you. Since Class I hitches only come with a hitch receiver of 1-1/4 inches, the Thule T2 Pro XTR will not fit a Class I hitch. The reason why it won't fit is because the Thule Pro XTR is only made for 2-inch hitch receivers, which come with a rating of Class III, Class IV, and Class V. All of the different classes have different weight ratings that they can hold safely.
With that being said, if you want a similar rack to the Thule Pro XTR that will fit a Class...
view full answer... - Will the Thule OutWay 2 Trunk Mount Bike rack Accommodate a Step Through Bike
- In order to use a hanging rack like the Thule OutWay # TH45JV, with a step through bike, you will need to use the Bike Adapter Bar, # TH982XT. The adapter clamps to the bar beneath the handle bars and the seat post to create a cross bar so that you could then hang it on the rack.
I have included a link to a video demonstration of the adapter.
view full answer... - Will Draw-Tite Trailer Hitch Fit a 2019 Nissan Altima AWD
- The Draw-Tite Sportframe Trailer Hitch Receiver part # 24796 is a confirmed fit for a 2019 Nissan Altima AWD.
view full answer... - Fit of Roadmater Base Plate Kit # 131-15 on 1995 Nissan Altima
- If your 1995 Nissan Altima has the factory installed driving lights in the front bumper, Roadmaster states that the # 310-3 is not a fit. It MIGHT be possible to remove the OEM driving light assemblies so the base plates will fit, but this has not been tested, so we cannot say with any certainty that it would work. However, it should be noted, that #310-3 is no longer available.
You'll need to check with your owners manual or with Nissan to determine if your vehicle is capable of being...
view full answer... - Will Adding Firestone Air Bag Helper Springs Raise the Suspension On a 2009 Nissan Altima?
- You may see some rise in the rear of your 2009 Nissan Altima when you add the Firestone Coil-Rite Air Helper Springs # F4105. It really depends on if you already have additional weight on the rear end and if your springs are worn. With new springs and no additional weight you are less likely to see any rise in the rear suspension but as the bag pushes into the coils it will allow some of the sag to be relieved and raise the height on worn springs.
The Air Command Compressor System # F2610...
view full answer... - Can the Safety Tab Be Removed on Class I Trailer Hitch Receiver for a 2008 Nissan Altima
- The tab on the inside of the trailer hitch receiver for your 2008 Nissan Altima is meant to ensure that the user only uses Class I rated accessories in the hitch. As you can see in the attached photo.
This is more of a safety precaution as Class I receivers like # 24796 cannot handle much weight especially if that weight is sticking out further from the receiver. It could damaged the receiver and ultimately damage your accessory (in this case your bike rack and bike).
To answer your...
view full answer... - Best Aero Roof Rack for 2018 Nissan Altima to Carry Surfboard
- You ask a very good question. Safe beats sorry every day of the week!
The Rhino-Rack Vortex Aero rack, which includes black crossbar part # RRVA126B-2 that you referenced, along with parts # RRRLKVA and # DK381, will work great for a surfboard. This rack has a 165-lb capacity and it will be compatible with a wide range of carriers.
I have included a link to our surfboard carriers that will fit aero-shape bars. I recommend the Inno Board Locker Surfboard Carrier # INA744 because it includes...
view full answer... - Will Timbren Axle-Less Suspension # ASR2KHDS04 Work with Kenda 205/65-10 Trailer Tire # AM3H400
- The Timbren Axle-Less Suspension # ASR2KHDS04 will work with the Kenda wheels/tires you referenced provided you select a hub that is compatible with both.
Dexter Trailer Hub Assembly # 84545UC1-EZ that you referenced is compatible with the bearings in the Timbren system and uses the same bolt pattern as the tire/wheel you referenced, part # AM3H400 from Kenda.
Another option is to use an axle with drop spindles or a torsion axle with 0 degree articulation. These methods will provide lower...
view full answer... - Best Bike Rack for a 2013 Nissan Altima with Factory Spoiler
- A great option for your 2013 Nissan Altima is the Thule OutWay # TH45JV because it is designed to fit with a spoiler. The OutWay has two layers of cushioning that will minimize vibration while traveling as well, they call this the road dampening technology. They also have updated No-Sway technology to keep your bikes from coming into contact with each other or your Altima. This rack comes with locks for both your rack and your bikes.
Another item you may be interested in is the Kuat...
view full answer... - Fit of SportRack Roof Rack # SR1005 on a 2000 Nissan Altima
- The SportRack Square Bar Semi-Custom Roof Rack you referred to, part # SR1005 is a confirmed fit for your 2000 Altima GXE. The rack attaches to the vehicle using clips that attach to the inside top of the door jambs. Because this is a 'semi-custom' rack, it'll fit many different vehicles, some better than others.
I'm sorry to hear about the trouble you had with the # SR1002, that rack is not a fit for your Altima. It fits newer model Maxima, Sentra and Versa 4 and 5 door models.
view full answer... - Will SportRack Roof Rack Fit a 2014 Nissan Altima with Sunroof
- A naked roof means that there are no side rails, crossbars, tracks or anything that could be considered a roof rack on the vehicle. I do not believe the 2014 Nissan Altima had any of those options from the factory so SportRack semi-custom roof rack # SR1010 will fit. I have linked a video review of this roof rack for you.
view full answer... - What Bike Rack Will Work On The Draw-Tite Class I 1-1/4 Inch Hitch # 24796 On A 2010 Nissan Altima
- The Draw-Tite Class I 1-1/4 Inch Hitch, part # 24796, will fit your 2010 Nissan Altima. I am including a link to the installation instructions on the Draw-Tite hitch.
The SportRack Evader 3 Bike Carrier, part # A30403XT, will fit a 1-1/4 inch hitch but it has to be a Class II hitch. The Draw-Tite hitch # 24796 is only a Class I hitch. So the bike carrier will not work on the Draw-Tite hitch.
A Class I hitch is a 1-1/4 inch receiver and is rated at a maximum tongue weight capacity of 200...
view full answer... - Kayak Carrier for Rhino-Rack Roof Rack with Euro-Style Square Bars on a 2010 Nissan Altima
- The Rhino-Rack kayak carrier # S510 does fit the square Euro-style crossbars which are 1-1/4 inches wide and 7/8 inches tall. But is a better fit on round and elliptical bars.
A better fit would be SportRack carrier # SR5511. It is designed to fit round, square, aero, elliptical, and most factory crossbars. It is also less expensive.
view full answer... - Correct Block Heater for a 2009 Nissan Altima with 2.5L Engine
- The correct block heater for a 2009 Nissan Altima with 2.5L engine is the Kat's Heaters Custom Engine Block Heater part # KH11412.
view full answer... - Cable Lock and Locking Hitch Pin that Fits Curt Platform Bike Rack 18084
- Since we have determined that the Sportrack hitch locks fit the Curt bike racks like the # C18084 that you referenced we can confirm that the Sportrack hitch lock and anti-rattle cable part # A32022 will work as well.
view full answer... - Will the Yakima SkyBox 21 Accommodate a Box that is 22 H x 17 W x 37 Long?
- I have a solution for you. Unfortunately, the Yakima SkyBox 21 # Y07337 (or any other cargo box we carry) will not accommodate the 22-inch height of your shipping box. However, the Yakima SkyBox 21 will accommodate your travel case and gold clubs.
For an alternative way to travel with your travel box, a hitch-mounted carrier is the way to go. I recommend the 19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 300 lbs # C18110. With the Curt Cargo Carrier, you will need the Erickson...
view full answer... - Will the Derale # D13501 Fit a 2012 Nissan Altima
- Yes, the Derale # D13501 will fit your 2012 Nissan Altima but you will need to do some measuring to find out where the best place to install it is.
I have attached some helpful articles on transmission coolers for additional information about coolers and where to install them for you to check out.
view full answer... - Does Reese Fifth Wheel Hitch Head part #RP30047A Fit Slider Base RP30092
- Yes, we have confirmed that the Reese Fifth Wheel Hitch Head part # RP30047A is a fit for the Reese Slider Base Assembly part # RP30048 that you also referenced as well as the # RP50024.
view full answer...
Go To Results