bing tracking image
  1. Trailer Ramp Springs
  2. TRC
  3. Single Ramp Spring
  4. 69 Inch Wide Doors
  5. Conventional
  6. 69 Inch Wide Spring
Conventional Ramp Door Spring for 6' Wide Enclosed Trailer - Single Spring - 120-lb Capacity

Conventional Ramp Door Spring for 6' Wide Enclosed Trailer - Single Spring - 120-lb Capacity

Item # 362SA6
Retail:$187.57
Our Price: $178.01
You Save: $9.56
Trailer Ramp Springs
Shipping Weight: 21 lbs
Add to cart
In Stock
TRC Trailer Ramp Springs - 362SA6
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Fits 38" to 69" wide trailer doors. Great Prices for the best trailer ramp springs from TRC. Conventional Ramp Door Spring for 6' Wide Enclosed Trailer - Single Spring - 120-lb Capacity part number 362SA6 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (47)
  • Q & A (0)
  • Photos

TRC Trailer Ramp Springs - 362SA6

  • Single Ramp Spring
  • 69 Inch Wide Doors
  • Conventional
  • 69 Inch Wide Spring
  • 120 lb Capacity
  • TRC
  • Steel
  • 4-7/8 Inch Tall Spring

Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Fits 38" to 69" wide trailer doors.


Features:

  • Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury
    • Helps take on the weight of your trailer door so you don't have to
  • Spring reduces wear and helps prevent damage to door hinges
  • System can be modified to fit your specific application
    • Slide the bracket and cable drum down and cut the shaft to a shorter length
  • Sturdy steel construction
  • Made in the USA


Specs:

  • Application: 38" to 69" wide trailer door
  • Dimensions: 69" wide x 4-7/8" tall x 7-1/2" deep
  • Spring capacity: 120 lbs
  • Cable length: 150"


Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.

TRCSA 6 TRC Enclosed Trailer Ramp Conventional Spring - Single 218 - 67" Wide - Qty 1





Customer Satisfaction Score:


Customer Reviews

Conventional Ramp Door Spring for 6' Wide Enclosed Trailer - Single Spring - 120-lb Capacity - 362SA6

Average Customer Rating:  4.8 out of 5 stars   (47 Customer Reviews)

Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Fits 38" to 69" wide trailer doors.

by:

Ramp spring fit perfect and had all the pieces I needed to install on a 6x12 US cargo v nosed enclosed trailer. Spring still works well in year after purchase. This is a work trailer that is opened and closed multiple times 5 days a week.



by:

Exactly what I needed! I'm using it in a shed application to operate a utility ramp. I've installed several door spring assists, but it's been a while. The included instructions are a concise and good reminder of the steps involved.

Kenneth

7/24/2023

Its been a great product, and a pleasure to use it, sometimes twice a day. After all the use I took up one quarter more turn in the spring for slack that had developed. I consider that minimal maintenance!



by:

Ramp door spring works great.



by:

Great help from Madison when I placed this order on the phone. I was given a date the product would arrive and it arrived on said date in excellent condition. If you need trailer parts this is the place!



by:

This came as a complete kit of spring parts and installation brackets etc. Chat online very helpful and knowledgeable to pickout correct items for my needs. Quick and efficient shipping and delivery, door to door in 3 days. Pricing very reasonable. I am happy with my purchase.



by:

The spring is excellent but the rod is made of hollow metal and wears out too quickly.



by:

Work awesome!



by:

My door spring arrived sooner than I expected, and I installed it completely in 45 minutes, easy install



by:

Works Great easy install highly recome nded



by:

Great parts Great prices But sent the wrong item! But the etrailer.com team made it right.



by:

excellent quality and heavy duty product. Just make sure to mount it so that the spools wind from the bottom.



by:

Excellent does just what I wanted it to do



by:

worked great easy to install



by:

my order arrived on the specified date and it was as i had ordered. always happy when dealing with etrailers. i am eager to install these parts.

David M.

8/20/2021

1 year and all is great with all that i purchased. etrailer is were i shop for all of my parts because it is so easy to do.



by:

fast delivery Excellent product



by:

Excellent product, would recommend for future installation. Easy install with instructions provided. Replace broken door assist now I can close trailer door with ease



by:

Great service! Even helped me get the right one for my older trailer. Very easy to replace. Done in an hour.



by:

Easy install. I Cut to fit my trailer width. Installed and working great



by:

Great job. Thank you so much



by:

the ramp spring work perfect for my project and the service was very very good



by:

Fast delivery, easy install. Very happy with the product. Would recommend to anyone.



by:

Great replacement. service very fast and free delivery. Fit and ease of install was easy .I will use you guys again in the future. Thanks



by:

Ordered at the end of the day with overnight shipping-was very surprised when it actually arrived the next day! Great service.



by:

Absolutely ridiculous. It took almost 7 months to get



by:

The spring was at a great price and it worked wonderful thank you.


25
47
Show More Reviews

See what our Experts say about this TRC Trailer Ramp Springs

  • Does Conventional Ramp Door Spring 362SA6 Include The Mounting Brackets?
    The Conventional Ramp Door Spring for 6' Wide Enclosed Trailer # 362SA6 actually does include the mounting brackets, just not the mounting hardware. The reason for this is that the mounting hardware is dependent on the structure of your specific trailer. If you are not familiar with installing torsion springs then you will need to have a professional install this for you. I included a video of the # 362SA6 for you to take a look at.
    view full answer...
  • Ramp Springs for the Front and Rear of a Snowmobile Trailer
    For the rear opening I recommend using enclosed trailer ramp spring # ERS120D81. It has a capacity of 120 pounds. And for the rear I recommend # 362SA6 which has a 120 pound capacity. Professional installation by someone with torsion spring installation (like a garage door company) is recommended because working with these types of springs can be dangerous. You would not be able to use a spring such as # RS16933RH because it produces 2,000 pounds of torque. This would require a very have...
    view full answer...
  • Replacement Torsion Spring for 1990s Carson Enclosed UtilityTrailer
    To select a replacement torsion spring for your enclosed trailer's rear ramp door you will want to match up the spring dimensions and also confirm the weight of the ramp door. There is no way to look up the original part but contacting Carson with the trailer VIN might be enough for them to tell you something that will help you select the correct new spring. The item you mentioned, part # 362SA6, has a weight capacity of 120-lbs and overall it is 67-inches. Width can be adjusted from...
    view full answer...
  • Does Lifting Force Consistency of Conventional Ramp Door Spring # 362SA6
    When wound properly the 120 lb lifting force of the Conventional Ramp Door Spring # 362SA6 is going to be basically throughout the entire range of the ramp being lifted as you'll feel it. That said, the spring will be helping the most when the ramp is on the ground and as it gets closer to the being closed gravity will affect it less and less which works out perfectly as the pulling force of the spring will begin to diminish at the same time. This is why it's so important to have a professional...
    view full answer...
    Image 1 for
  • Ramp Door Spring Recommendation for a 2009 Carson 6x10 Enclosed Trailer
    Trailer ramp door springs are generally chosen based on the inside width of the trailer where it will be installed. Also, ramp door springs such as # 362SA6 can be trimmed down some if the length is too much for the trailer. This is the shortest version we have in this style. It can be trimmed down to 38-3/8" inches if needed. We strongly recommend to have a garage door company install these types of springs because if not done properly it can be very dangerous since the springs are under...
    view full answer...
    Image 1 for
  • Rear Ramp Door Lift Spring Recommendation for Enclosed Trailer
    For enclosed trailer ramp/doors the best option is the style of spring that mounts to the top of the rear door frame and pulls the ramp up like the Enclosed Trailer Ramp Spring # 362SA6. The Gorilla Lift you mentioned only works on utility trailer with raised bed rails.
    view full answer...
  • Correct Ramp Door Spring for 61" Doorway
    The Conventional Ramp Door Spring for 6' Wide Enclosed Trailer part # 362SA6 is designed for 38" to 69" wide trailer doors so this is what you'll want to use. The bar will actually be trimmed to fit your exact width.
    view full answer...
  • Conventional Ramp Door Spring that Fits 61 inch Wide Ramp Door
    We don't have ability to cut down our trailer ramp springs at this time but we do have a Conventional Ramp Door Spring that does fit your 61 inch wide door that would not require cutting with the part # 362SA6 which would work great.
    view full answer...
  • Recommended Rear Ramp Door Lift Spring for an Enclosed Trailer
    I have a solution for you but the Gorilla Lift item # GL1 you referenced only works on utility trailers with raised bed rails. To help raise the ramp door of an enclosed trailer you will want to use the Ramp Door Spring for 6' Wide Enclosed Trailer item # 362SA6. This functions like a garage door on a house. The tension provided by the torsion spring handles the weight of the trailer's door. I have linked a review video below.
    view full answer...
  • Measuring Ramp Door Weight For Replacement Ramp Door Spring
    In order to properly weigh your door to figure out the correct spring you only need to find the weight when the ramp door is down. Assuming you weighed your door without spring assist, you can use the 74 lb measurement. Typically, you use a scale and place a block of wood or something similar on the scale and rest your ramp on the block to get this measurement. You do not need to know or estimate the total weight of the door to choose a replacement spring. Based on the weight and the door...
    view full answer...
  • Can Enclosed Trailer Ramp Spring Be Cut Down When Installing
    The Enclosed Trailer Ramp Spring, part # 362SA6 will work great for your Haulmark trailer. This spring is 66-inches long but can be trimmed down to fit the size you need. The spring has universal brackets with 3/8 inch holes and can be mounted on the trailer header. The bracket can be installed by welding if that's the way you need it. You will want to use great caution when installing the cable and adjusting the spring tension. If you are not familiar with how it is done I strongly recommend...
    view full answer...
  • How Much Can the Conventional Ramp Door Spring for 6' Wide Enclosed Trailer Be Cut Down
    The Conventional Ramp Door Spring for 6' Wide Enclosed Trailer part # 362SA6 can be cut down to fit a 38" wide doorway. Therefore, it would indeed work with a roughly 3-1/2' wide doorway.
    view full answer...
  • Should Enclosed Trailer Ramp Spring # 362SA6 Install to Sheet Metal Above Enclosed Trailer Ramp
    The Enclosed Trailer Ramp Spring # 362SA6 that you referenced does require a very solid mounting point for installation. If that means you have to drill through the steel of your trailer above the ramp then that would be the best way to do it. You do need support at the bracket locations for the spring to lift the weight it is designed for. The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked...
    view full answer...
  • Ramp Door Spring Recommendation for a 5x8 Enclosed Trailer
    What I recommend for your enclosed trailer is a ramp spring such as # 362SA6 which is 66 inches wide. This is similar to a garage door spring and as such it is recommended to have someone with experience installing garage door torsion springs perform the installation. The spring will not take up the total weight of the door but will assist with 80 pounds of it which is the max capacity of the spring.
    view full answer...
  • Can the Enclosed Trailer Ramp Spring # 362SA6 be Trimmed Down Shorter
    Yes, you can trim down the length of the Enclosed Trailer Ramp Spring # 362SA6 as needed. The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
    view full answer...
  • Length of Cables for Conventional Ramp Door Spring for 5 Foot Wide Enclosed Trailer
    I reached out to the manufacturer, who told me the cable was 135 inches long for the Conventional Ramp Door Spring for 5' Wide Enclosed Trailer # 362SA5. What you will do is measure from the top of your door down to the bottom of the door and if it measures up you can use the spring. In regards to capacity, the 85 lbs is the max weight the door can be to safely use the ramp door spring. If you need more capacity or a longer spring, for a longer 150 inch cable and 120 lb door capacity,...
    view full answer...
  • Recommended Ramp Door Spring Options For A 6' Wide Enclosed Trailer
    For a 6' wide trailer we have the 120lb capacity # 362SA6 and 80lb capacity # M364FR ramp door springs from M-3. Both of these options can be shortened by sliding the mounting bracket down and cutting the tube to fit your trailer. The # 362SA6 fits 38" to 69" wide trailer doors and the # M364FR fits 37-1/2" to 67-5/8" wide trailer doors.
    view full answer...
  • Ramp Door Spring Recommendation for Lifting Ramp Door that Weighs 77 lb and is 63 inches Wide
    Due to the weight and dimensions of the ramp door you have on your shed the 67 inch long Enclosed Trailer Ramp Spring # 362SA6 would be the better option. It's a few inches longer and has a capacity that matches what you'd need so it would be a great option.
    view full answer...

Do you have a question about this Trailer Ramp Spring?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Written by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.