Conventional Ramp Door Spring for 4' Wide Enclosed Trailer - Single Spring - 70-lb Capacity
(15 reviews)
Price: $131.38
In Stock
Conventional Ramp Door Spring for 4' Wide Enclosed Trailer - Single Spring - 70-lb Capacity
Item # 362SA4
Our Price: $131.38
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (15)
- Q & A (0)
- Photos
TRC Trailer Ramp Springs - 362SA4
- Single Ramp Spring
- 44 Inch WIde Doors
- Conventional
- 44 Inch Wide Spring
- 70 lb Capacity
- TRC
- Steel
- 4-7/8 Inch Tall Spring
Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Fits 24" to 44" wide trailer doors.
Features:
- Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury
- Helps take on the weight of your trailer door so you don't have to
- Spring reduces wear and helps prevent damage to door hinges
- System can be modified to fit your specific application
- Slide the bracket and cable drum down and cut the shaft to a shorter length
- Sturdy steel construction
- Made in the USA
Specs:
- Application: 24" to 44" wide trailer door
- Dimensions: 44" wide x 4-7/8" tall x 7-1/2" deep
- Spring capacity: 70 lbs
- Cable length: 150"
Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
TRCSA 4 TRC Enclosed Trailer Ramp Conventional Spring - Single 200 - 42" Wide - Qty 1
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Defective
- Product did not meet expectations
Customer Reviews
Conventional Ramp Door Spring for 4' Wide Enclosed Trailer - Single Spring - 70-lb Capacity - 362SA4
Average Customer Rating: 4.9 out of 5 stars (15 Customer Reviews)
Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Fits 24" to 44" wide trailer doors.by: Doug 02/16/2023
Product received as advertised
by: JH Woodworks05/06/2021
Works great.
We used this for lifting a folding attic ladder as we needed something pretty strong. Our client still raves about it to this day!
Jh W.
5/9/2022
Still working perfect after a year!
by: James11/26/2021
This will aid in the opening & closing of my trailers back door .
by: Stephen06/20/2022
Worked better than expected for my custom shed door.
by: Jeremi06/02/2022
Wasn’t used for its intension, but worksd perfectly! Easy setup and installation. Spring tensioner was easy to set and reduced ramp door closure weight substantially. Would purchase again.
by: Carl 10/03/2022
Great product plus fair shipping. Easy to do business with.
by: Steve12/25/2020
This product was exactly what I expected. It arrived immediately was well packaged and no missing components. Excellent price, Thanks
by: Joseph 11/23/2021
nice rare kit for smaller doors
by: Stanley 08/05/2023
by: Lonie09/19/2023
by: Tony 10/21/2020
by: Bradley 05/02/2021
by: Douglas 04/01/2021
by: Joe02/09/2021
by: Joe 03/15/2021
15
15
See what our Experts say about this TRC Trailer Ramp Springs
- Does 4 ft Ramp Door Spring Come as a Dual Spring OptionThe dual springs are for larger ramp door applications. Since you have a smaller 4' door you just need a ramp with a single spring like the Conventional Ramp Door Spring # 362SA4 you were looking at.
view full answer... - Length Of The Ramp Door Spring # 362SA4The Conventional Ramp Door Spring # 362SA4 is in fact 44 inches. The spring assembly is able to be cut down to 23-3/4 inches minimum. The spring helps reduce wear and helps prevent damage to the door hinges. The system can be modified to fit your specific application, just slide the bracket and cable drum down and cut the shaft to a shorter length. The spring has a sturdy steel construction. It will fits doors from 24 inches to 44 inches. I attached a review video link below.
view full answer... - Can TRC Enclosed Trailer Ramp Spring Be Cut DownAn Enclosed Trailer Ramp Spring, like part # 362SA4, can be cut down to fit 23-3/4" to 43-3/8" doors. Ramp Spring # 362SA5 can fit 31-5/8" to 55-1/2" inch doors. They are customizable to fit the space available in your trailer as well as the door size so for your door I recommend # 362SA5. These springs are unique in that they are not the high torsion springs that require professional assistance for installation. They are self adjusting.
view full answer... - Door Spring Recommendation for 50-75 lb Cellar DoorThe 120-lb Capacity Self-Winding Ramp Door Spring 362SW61 isn't available anymore but we have this one instead that I believe will work better for you: - Conventional Ramp Door Spring # 362SA4 This is designed for 24" to 44" wide doors and has a spring capacity of 70 lbs so for your 50-75 lb door this should make it a breeze to open!
view full answer... - Availability of Ramp Spring that Fits 30-36 inch Wide OpeningThat specific part number isn't available but we have the same spec ramp spring with the part # 362SA8207 which is 94 inches wide, a dual ramp setup, and has a 150 lb capacity. For a smaller size that fits a 30-36 inch wide door instead you'd want the part # 362SA4 which fits door widths that are between 24 and 44 inches.
view full answer... - Why Doesn't Conventional Ramp Door Spring 362SA4 Come with InstructionsThat's a really good question and I do apologize for confusion on that. But the reason instructions aren't included with the Conventional ramp door spring part # 362SA4 is because they aren't intended for the DIYer to install. It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system. These can be dangerous...
view full answer... - How Much Does Conventional Ramp Door Spring WeighThe Conventional Ramp Door Spring # 362SA4 weighs 12 lbs.
view full answer... - Ramp Spring Recommendation for a 33 inch Trailer Door RampSince you have such a skinny door I would recommend you get a spring assist like the Ramp Spring # 362SA4. This assembly can be cut down to 23-3/4 inches minimum so it will be a great fit for your custom ramp.
view full answer...
Do you have a question about this Trailer Ramp Spring?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Installed by:
Kathleen M
Updated by:
Wilson B
Written by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Doug
2/17/2024
This item has worked very well for the past year that I have owned it. There have been no issues with it at all