Optronics LED Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Oval - Amber Lens
(198 reviews)
Price: $6.44
In Stock
Optronics LED Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Oval - Amber Lens
Item # MCL31AB
Our Price: $6.44
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (198)
- Q & A (0)
- Photos
Optronics Trailer Lights - MCL31AB
- Clearance Lights
- LED Light
- Amber
- 4L x 2-1/16W Inch
- Rear Clearance
- Side Marker
- Non-Submersible Lights
- Optronics
4" x 2-1/6" Oval. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing. Surface mount - hardware not included. 2-Wire design. P2 rated.
Features:
- LED trailer light functions as a clearance light or side marker light when properly mounted
- Built-in reflex reflector removes the need for a separate reflector
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable ABS housing and acrylic lens
- Amber lens over white LEDs
- Compatible with 12V DC systems
- Surface mount to trailer - hardware not included
- 2-Wire design includes power lead and ground wire
- DOT compliant
- P2 rated
Specs:
- Dimensions: 4" long x 2-1/16" tall x 1" deep
- Distance between mounting holes (center to center): 3"
- Diodes: 6
- Power draw at 12.8V: 0.040 amps
- Lifetime warranty on LEDs
P2-Rated Lights
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
MCL31AB Optronics LED Clearance or Side Marker Trailer Light w/ Reflex Reflector - 6 Diodes - Oval - Amber Lens - P2 Rated
Alternate part number: MCL-31AB
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
Customer Reviews
Optronics LED Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Oval - Amber Lens - MCL31AB
Average Customer Rating: 4.8 out of 5 stars (198 Customer Reviews)
4" x 2-1/6" Oval. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing. Surface mount - hardware not included. 2-Wire design. P2 rated.by: David 01/27/2024
Fit and works fine on my RV trailer.
by: Jeff 02/08/2024
Perfect LED replacement. Worked great.
by: Kevin 03/18/2024
Work great on my motorhome.
by: Jason S.08/04/2014
I used this side marker to replace existing Bargman 99 series lights on a camping trailer. The Optronics LED model was not quite as bright as I would expect for a 6 diode unit, but still an improvement over the incandescent model. It is larger in size than the Bargman 99 series, so it covers up any surface imperfections on the trailer.
by: Eran05/30/2024
Great product at a great price.
by: Michael 05/05/2024
I was able order the parts I needed and get them quickly.
by: John 11/01/2023
etrailer had what I needed, and it got here fast! Perfect!
by: Amanda01/14/2019
Easy install on my horse trailer. Nice and bright, just as expected.
by: GaryT7409/10/2017
One of the best upgrades I made was switching the lights to LED.
by: Don 08/20/2023
Excellent replacement
by: Chris 07/04/2023
These lights were used to replace the incandescent versions. Worked great.
by: Dennis12/16/2023
easy to order, and fast delivery.
by: Lisa 11/05/2023
Great product, price and service, met all my expectations.
by: Phil Z11/21/2016
I needed to replace some of the lights on my boat trailer. The old light were incandescent and some of the bulbs had burned out, securing screws were rusted. Product was exactly what I was looking for. Links on each product web page provided very good description and product information.
Thank you for great selection and process.
by: Paul08/05/2022
I removed a light of the same shape that had an incandescent bulb. This light did not require any electrical changes such as the addition of a resistor. It did require one new hole per fixture due to the holes not lining up with the holes from the old light. Also, the size of the screws/bolts that held it in place had to be smaller. I used 10-32 screws and lock nuts to secure it. This was NOT a direct replacement as I thought it would be. The 2 wires about about 2 gauges smaller than the original light. It works fine once installed. It caused added expense and more labor. Looks pretty much identical to what I took off but it is brighter and builds no heat when on. For the money, it was a good purchase.
by: Paul 12/09/2020
Good buy for a great side marker. Lamp comes with about a five or six inch lead wires that simplify electrical installation.
Paul
12/10/2021
LED lights are bright and working well after a year of regular use.
by: John05/05/2018
replaced trailer wireing with thicker wire, replaced 4 side marker lights led, replaced both tail lights led, all worked and look good. I just hope these led lights last a long time. the lights I took off all worked, but were not as bright as I wanted, they were the original lights that were on my pontoon boat trailer.
by: Guy C09/29/2015
I was having problems with the electrical system on my horse trailer. Basically the marker and tail lights were all original (18 years old) and worn out. I believe they were causing shorts as well as drawing way too much current. We changed all the trailer lights to LED and the transformation is remarkable - no more braking problems, no more dim barely working runnig lights. The service from etrailer was excellent. Everything arrived as ordered and promised.
by: Russ T.04/11/2017
LED lights are the way to go. The reflective marker lights are great for times when the lights aren't on yet headlights will reflect off them letting the driver know there is something there. The only thing would be better on these lights would be a better ground.
by: Harvey06/15/2019
I was very fortunate to have purchased an all fiberglass enclosed motorcycle trailer from a friend who no longer rides. Over the years I have updated to all LED lighting and replaced all hardware to marine grade stainless. I live in the tropics with high humidity and plenty of salt erosion, therefore, this is further protection against corrosion. LED lights purchased from your company we’re not only reasonably priced but excellent quality...
by: Jeff F.05/11/2014
Excellent set of lights for my horse trailer. Installation was easy and the brightness of the LED lights is outstanding. No more replacing bulbs or cleaning contacts for the bulbs to work properly. Etrailer shipping was fast and all products were excellent.
by: Cheryl 07/23/2020
The lights work great, very bright. Easy to connect the wires and mounting was a breeze.
Cheryl
7/24/2021
These lights are easy to install and are bright.
by: Smith Farms06/22/2018
Great lights. I get asked about them everywhere I go. Super bright and being led they are have very low amp draw. I led a small caravan once in heavy rain. Those that were behind me could not believe how well my trailer lights blasted through the rain.
by: David10/22/2018
A good light that is perfect on my motorcycle camping trailer, gives off ample light for others to see because a motorcycle can sometimes be more difficult to notice than a larger vehicle. These are replacing old original incandescent lights, thay are brighter and use less electricity making it easier on the motorcycles electrical system. The product is as described on etrailer and arrived on time and in good condition.
by: MotoMac11/17/2014
These items arrived in loosely in a box with only a single sheet of brown paper as packing. Several lenses have minor scratches from the transit, but probably nothing compared to what they'll be getting once mounted on my trailer.
At the moment there is 11" of snow on the ground and the temperature is 7F, so it will be a while before I go out and replace all the incandescent lights with these LED units on my trailer. I'll edit this when I'm done.
25
198
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Troubleshooting Running Lights Come On Then Shut Off On TrailerIt sounds like you either have a weak/bad ground or your lights are drawing too much power. In order to find the problem lets start by double checking the connector on your 2020 GMC Sierra 2500. Using a circuit tester like # PTW2993, check for power on the running light circuit. More than likely you have constant power here and the issue is on the trailer side. If it is on the trailer side I would start by inspecting the connector. Make sure it is free from debris and corrosion. From...
view full answer... - Replacement Taillights for Trailer Taillight SAE-P2-A-72For an exact replacement we have the part # MCL31RB for a red taillight and part # MCL31AB for an amber light. For just lenses you'd want the part # A31AB for an amber lens and part # A31RB for a red lens.
view full answer... - Clearance Light Replacement for Glo Brite 122-Y Lights on TrailerI have a solution I can provide for you but we do not carry the replacement lens you are looking for. The clearance light part # MCL31AB and # MCL31RB are very close in shape and dimension to the lights you are looking for. They are both 4 inches wide by 2 inches tall. The # MCL31AB is amber in color and the part # MCL31RB is red in color.
view full answer... - Replacement Clearance Light Option For A 2012 Thor Hurricane 23A MotorhomeHello Barbara, we certainly should have the correct replacement clearance lights for your 2012 Thor Hurricane 32A motorhome. That said, I do not have a way to know exactly what light you will need based on a year make and model of RV. Based on the pictures I can see online, the clearance lights look similar to the Optronics Trailer Clearance or Side Marker Light # MC32AB and # MCL32RB. These are 4" long x 2" tall x 1" deep LED clearance lights. If this is not exactly what you have, feel...
view full answer... - Clearance Light Replacement for Glo Brite 122-Y Lights on TrailerI have a solution I can provide for you but we do not carry the replacement lens you are looking for. The clearance light part # MCL31AB and # MCL31RB are very close in shape and dimension to the lights you are looking for. They are both 4 inches wide by 2 inches tall. The # MCL31AB is amber in color and the part # MCL31RB is red in color.
view full answer... - Replacement Light Recommendation for a Bargman Light part # 34-47-802 The Bargman Light part number 34-47-802 that you referenced was discontinued back in 2013 so there are no replacement parts available for it. For a very similar light to that check out the part # MCL31AB. I attached an install video for you to check out as well.
view full answer... - Recommended LED Marker Lights for Trailer Over 80 Inches WideThe Trailer Clearance or Side Marker Light w/ Reflex Reflector - LED - 3 Diodes - Red Lens - Black Base # MCL32RBB will have the room to hide wires. The amber lens # MC32ABB is an incandescent bulb. I believe you will want the Oval LED Trailer Clearance, Side Marker Light with Reflector, 6 Diode - Amber # MCL31AB along with the Oval LED Trailer Clearance, Side Marker Light with Reflector, 6 Diode - Red # MCL31RB. For the light bar, I recommend the Sealed, 3-Light Truck, Trailer Identification...
view full answer... - Clearance Light Replacement for Glo Brite 122-Y and 122 R Lights on TrailerI have a solution I can provide for you but we do not carry the replacement lens you are looking for. The clearance light part # MCL31AB and # MCL31RB are very close in shape and dimension to the lights you are looking for. They are both 4 inches wide by 2 inches tall. The # MCL31AB is amber in color and the part # MCL31RB is red in color.
view full answer... - LED Replacements for Optronics Rectangular Trailer Clearance Lamp MC32RBWe do not have an exact LED replacement for the incandescent side marker lamp you mentioned, part # MC32RB, but we have an alternative that is very close. Part # MCL31RB (red lens) and part # MCL31AB (amber lens) are shaped a bit differently than the lamp you referenced. They are also about an 1/8 of an inch wider and thinner in depth. The important dimension, the distance between the mounting holes, is still three inches, so you will be able to use the existing holes. If you click on...
view full answer... - Replacement Clearance Light for 2020 Mallard M252 Travel TrailerIn order to find a replacement clearance light for your 2020 Mallard M252 Travel Trailer I recommend taking some measurements. The # MCL31AB is 4" long x 2-1/16" tall x 1" deep. This is an LED light that uses a 2-wire design for power. If this matches your light from the other side in terms of dimension and appearance then it would make a good replacement. If you send me the dimensions of the light on the other side and a picture I would be happy to look for a different replacement if...
view full answer...
- Replacement Side Marker Lights for Southwind RVIf the Glo-Brite 446A/R side marker lights on your Southwind RV are 4" long x 2" wide you can use # MCL31AB if you need LED lights or you would use # MC38AB for an incandescent replacement. If your Southwinds RV has a different sized or color light, please let me know or send a picture and I can help you find the appropriate replacement light.
view full answer... - Replacements for 446A/R RV Clearance LightsAlthough we don't offer a replacement lens or a clearance lamp assembly that fits those dimensions, we offer a 6 x 2 inch replacement LED clearance lamp, part # MCL76RB that would last up to 50 times longer than an incandescent lamp, would be much brighter and would only draw a fraction of the power that an incandescent lamp would. I've linked to a product description video for the lamp I recommended.
view full answer... - Availability of Replacement Trailer Taillights Reflect-O-Lite SAE-P2-A-72For an exact replacement to what you sent in a picture of we have the part # MCL31RB for a red taillight and part # MCL31AB for an amber light.
view full answer...
- Replacement Clearance Lights for 2012 Forest River Sunseeker Class CWe do not have information that tells us specifically what lights are on your 2012 Forest River Sunseeker, so the best way to determine what's going to fit is by providing measurements or a part number off the existing lights. With that said, it looks like you may have something similar to the Optronics LED Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Oval - Amber Lens # MCL31AB. The # MCL31AB is 4" long x 2-1/16" tall x 1" deep with mounting holes 3" apart (center on...
view full answer...
- Most Popular Replacement Clearance/Marker Lights for an Old Travel TrailerThe most popular clearance/marker lights we offer are the Optronics Clearance or Side Marker Lights w/ Reflex Reflector. These are offered in both incandescent part # MC38AB for amber or part # MC38RB for red and LED part # MCL31AB for amber or part # MCL31RB for red. They have a two wire design so they are super easy to install. The white wire gets grounded and then the back wire goes to the running light circuit with butt connectors part # DW05744-5. If you need screws to attach the light...
view full answer... - Would Replacement Lens part # A31AB Replace Lens of Reflect O Lite Bargman 478Yes, the part # MCL31AB that you referenced would replace a 478 Reflect o Lite Bargman clearance light lens as they are essentially the same.
view full answer... - Is there a Replacement Lens or Light for TMC GLO-BRITE 2317/2318AI do have a solution for you but we do not have a replacement lens that matches your Glo-Lite ID light bar (from what I found the light number 2317 is an ID light bar. If that is not the case please send a picture of the light with the dimensions). We do have many other ID light bars that you could use such the # MC99AB. Replacing the light is going to be the way to go since the company is out of business.
view full answer... - Recommended Round Trailer Fender and Lights for 14 Inch Wheels on 2016 Forest River R-Pod TrailerNo photo came through, so I did a little research on your trailer to attempt to get the missing visual. I recommend the CE Smith Single Axle Trailer Fender- 14" Wheels - Qty 1 # CE17900G for your 2016 Forest River R-Pod 180. It will need to be primed and painted black to match your trailer or powder coated like the original fender. You may want to consider the mounting brackets # CE26098G-2 if your mounts were damaged as well. For the marker lights, I don't know the size you need,...
view full answer... - How To Mount the Optronics LED Clearance or Side Marker Light w/ Reflex Reflector Part # MCL31ABThe Optronics LED Clearance or Side Marker Light w/ Reflex Reflector part # MCL31AB mounts by running two screws like part # 1131832 though the base. In order to access these screw holes you will need to remove the lens. I have attached a photo that shows the screw holes. I have also attached an install video for you as well. In order to make the wiring connections you will also need part # DW05714 and part # DW05737-1.
view full answer...
- Availability of 2 inch x 4 inch Amber and Red 6 Diode LED Clearance Lights for TrailerWe have just the lights that you are looking for! Optronics has their Oval LED Trailer Clearance, Side Marker Light with Reflector, 6 Diode in both Amber # MCL31AB and Red # MCL31RB. These lights are 6 diode LED clearance lights that measure 2-1/16 inches by 4 inches. They do come with 2 wires but one of them is a ground that you will attached to a bare metal surface on your trailer. The other wire will be connected to the appropriate wiring on your trailer that your old lights were hooked...
view full answer... - Replacement Trailer Clearance Light with 3 Inch CentersThe best replacement clearance light we have for you is the Oval LED Trailer Clearance Light part # MCL31RB for red or part # MCL31AB for amber. This light measures 4" long x 2-1/16" wide x 1" deep and mounts on 3" centers. It has a wire for power and a wire for ground but it won't be much work at all to run the new ground wire. It features 6 LED diodes and has a reflective housing. I have attached review videos for you as well.
view full answer...
- Replacement Trailer Light Assembly to Replace Glo Brite # 122YI have a solution I can provide for you but we do not carry the replacement lens you are looking for. The clearance light part # MCL31AB and # MCL31RB are very close in shape and dimension to the lights you are looking for. They are both 4 inches wide by 2 inches tall. The # MCL31AB is amber in color and the part # MCL31RB is red in color.
view full answer... - Replacement Clearance Light for 2001 Fleetwood Southwind MotorhomeCould I see pictures of the lights you want to replace? With that I can easily identify what replacement parts you may need.
view full answer...
- Optronics MCL19CAB Clearance LIght Recommendation for TrailerThe part # MCL19CAB is a pretty attractive clearance light. If you like it why not just use it? I has mounting holes that are 4-5/8 inches apart which should be pretty easy to use to install the light on your trailer.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Phil Z.
11/21/2017
I am very happy, the lights are working great, with no issues. Thank you