Summer Starts Here - Save up to 70%
2-1/2" Round. Trailer light functions as both a clearance light and side marker light when properly mounted. Piranha series combines modern design with vibrant lighting. Recessed mount requires grommet. Accepts AMP-style plug. PC rated.
Features:
Specs:
PC-Rated Lights
A PC-rated light produces a 90-dgree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side maker light.
Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everyone. I'm Ellen here at etrailer.com and we're going to be looking at the Piranha LED Trailer Clearance Marker and Side Marker Light. This is a red LED light to give your trailer a little bit clearer lighting while you're out on the road, makes it easier for other drivers to see what you're doing and see those lighting functions, so stays safe and also stays compliant with all DOT laws. The nice thing about an LED light over an incandescent light is that it's going to last longer. There's virtually no maintenance to worry about because there's no bulb to change with this, so it should last a really long time, give you a nice bright light. The other advantage is that it's also going to be as bright or brighter than a similar incandescent bulb, but have a lower power draw so we're not taxing our electrical system as much.
We're not draining down our battery as much. It's going to be able to produce that same amount of light or more, but use that less power.I can take a little closer look at it. As far as how to attach it to the wiring plug, it's going to accept an AMP plug or an A-M-P plug, which looks like this. This is going to plug in and create a watertight seal. This is sold separately.
You can find it as one of the related products on the page here at etrailer.com, the product page for this light. So it just snaps over like that, and then that gives us our two wires to connect to power and ground, so I'm going to go ahead and connect those to my setup. Ground, and my red wire goes to power. Ta-da. The light comes on.
Nice bright, red light. Turn out the lights in the studio. You get a better idea of that lighting pattern in the dark, so nice, bright light even for how small it is. It'll have those five diodes so one, two, three, four, five, going in that X pattern or cross pattern, and then one in the center as well.Now this is a PC rated light, which means that it casts that beam of light in 180 degrees around or a full semicircle going all the way around. So you can see it on either side just as well as you can right in front of it.
So you can use this as a clearance and a side marker light at the same time if you have it mounted properly so you don't have to get one light for clearance and for your side marker light, so it makes it a more versatile light in that respect.Turn our light back on, and now we can talk about measurements. This little guy, take our plug off, measures 2 1/2" in diameter from edge to edge, and then it's about 1 1/2" in depth. Going to the back of that plug, 1 1/2", maybe just a bit over that, and going from just the red lens, it's about 7/8" thick. There is a grommet that goes with this. It is also sold separately. You can again find that as a related product here at etrailer.com on the product page, so I'd highly suggest picking that up. This has a power draw at 12 volts of 0.14 amps. Operating voltage range goes from 9 volts up to 16 volts, so it works with 12-volt DC systems. It's made in the USA and does have a limited lifetime warranty.I hope this video's been helpful in deciding if this is going to be the right light for you. If not, we do have others available here at etrailer.com of different sizes, and we also have amber and clear lights as well. So check them out right here, and thanks for watching.
Average Customer Rating: 4.8 out of 5 stars (275 Customer Reviews)
2-1/2" Round. Trailer light functions as both a clearance light and side marker light when properly mounted. Piranha series combines modern design with vibrant lighting. Recessed mount requires grommet. Accepts AMP-style plug. PC rated.
These are far better than the bland factory lights and are sealed very well.
The lights worked great for our Timpte hopper trailer.
Easy to install and fit holes from previous installation.
Not sure its anyones fault but the LED marker lights on my trailer fasten to the wall with screws and today that style is not made as it was in 2017...So i am rating the lights "average" cause till i open the light up without busting it I got to make it work and your lights are just the same as the rest...lights look fine and i will let you know how it works out...
Order 2 of theses paid extra for shipping , and they don't match each other dame part number , tried to return them wad going to cost me more thank just keeping the wrong parts does not match pictures on website
Good service fast shipping
These lights were the perfect brightness, very rugged, and easy to install inside protected areas of the frame on the updated raft trailer. etrailer has great selection, the website makes it easy to find the best parts for the job, and their communication is excellent. Their videos and reviews are invaluable.
came quick and was an exact match
Just starting using you guys and the service, website and deliveries have been great. Keep up the great work.
The 168R side marker light paired with the B168-18 mounting gasket were easy to mount and work perfectly.
The parts was the right size and on time thanks!
Better than the ones that came with the trailer.
Fast service and great communication
ACCURATE PART DESCRIPTION AND FAST SHIP PING
Exact replacement for my trailer. The factory incandescent bulbs had faded and connections were failing. With a quick inspection with a multi meter I found that all the lamp bases checked out.
I installed this Amber and Red marker lamps through out the whole trailer. I now “glow” going down the road at night. I highly recommend these replacement lamps.
Your products have never failed me…Been doing business for years….However, beyond your control, usps shipping is ridiculous….10 days from ordering to delivery…glad I wasn’t in a hurry!
Perfect for the job. Easy install, bright light, everything you need.
I think etrailer should have sent plugs with lights!
Excellent service as usual. Always great service and great products.
I was looking for a certain size to fit the existing cutouts on my trailer and I was able to find the one I needed because you guys listed the size. Great idea.
Replaced poorly designed lights on a travel trailer with these. The original lamps were not weather proof and used tensioned contacts that were prone to oxidation and corrosion from the elements. These LED lamps are sealed in epoxy so the elements will not affect them. Each lamp has two LEDs and a 6" wiring pigtail.
Purchased these side marker lights specifically because they have two wires rather than just a positive wire and the ground attached to the mounting grommet.
Lights were easy to mount and with rubber gasket they are protected from vibration.
Excellent service, unfortunately I ordered the wrong base and correct lights.
Will fit my application well, like the grommet. Not as bright as I had hoped but good. Great service prompt professional.
Always seem to have the lighting products I am looking for.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.